df36cdbcc9
siglent_sds1104xe: Switch back to native DRAM width (now possible with Nax).
2022-02-18 11:47:08 +01:00
d85f88f42a
siglent_sds1104xe: Reduce DRAM's width to 16-bit for now (to use NaxRiscv).
2022-02-16 17:59:40 +01:00
08a79fa3ac
lattice_ecp5_vip: Minor cleanups, fix CI.
2022-02-15 10:58:38 +01:00
30afe26669
Merge pull request #348 from hubmartin/ecp5-vip
...
Draft: Add Lattice ECP5 VIP board + HDMI output board support
2022-02-15 08:53:57 +01:00
2b1dac0f96
Merge pull request #350 from trabucayre/axu2cga_software
...
Axu2cga software
2022-02-15 08:21:50 +01:00
896884dd21
Merge branch 'master' into axu2cga_software
2022-02-15 08:21:29 +01:00
6bbf8c8268
Merge pull request #351 from sergachev/litex_baseboard_openocd
...
add openocd config for litex acorn baseboard
2022-02-15 08:11:41 +01:00
3f58df9974
platforms/targets: Fix typos.
2022-02-14 17:26:46 +01:00
b53b79821e
platforms: Expose toolchain parameter on all platforms to ease switching to alternative/open-source toolchains.
2022-02-14 11:35:18 +01:00
12b91eccdc
digilent_arty: Remove yosys+nextpnr INTERNAL_VREF constraint skip (now directly done in LiteX).
2022-02-14 10:45:29 +01:00
5cd1d7eaec
add openocd config for litex acorn baseboard
2022-02-13 16:44:40 +01:00
5eca41ac73
targets/alinx_axu2cga: adding PS software support (inspired by xilinx_kv260)
2022-02-12 18:24:01 +01:00
50654f1b7b
platforms/alinx_axu2cga: add zynqmp PS configuration params
2022-02-12 18:19:55 +01:00
d672d9a9b1
targets: s/alinx_axu2gca/alinx_axu2cga/gc
2022-02-12 18:12:45 +01:00
c2cd4410df
Code cleanup, add copyright
...
Signed-off-by: hubmartin <hub.martin@gmail.com>
2022-02-12 17:50:07 +01:00
c0e671919d
sqrl_acorn: Downgrade to SATA Gen1 for now (allow lower sys_clk_freq and enough for current tests).
2022-02-09 19:10:12 +01:00
d9b77c6f25
digilent_arty: Add --flash support.
2022-02-09 17:51:56 +01:00
4894926c40
xilinx_kv260: +x.
2022-02-09 16:01:51 +01:00
0c010d3d79
Merge pull request #347 from hplp/master
...
Alveo U280 with HBM now working for Linux
2022-02-09 07:44:36 +01:00
27b03df886
Add Lattice ECP5 VIP board + HDMI output board support
2022-02-08 21:47:58 +01:00
27a7534568
Merge branch 'master' of github.com:hplp/litex-boards
2022-02-08 12:56:03 -05:00
450a26f395
Merge branch 'master' of https://github.com/litex-hub/litex-boards
2022-02-08 12:55:09 -05:00
7ed633dc4b
add guideline for serial interface
2022-02-08 12:54:34 -05:00
0d2336768d
Merge branch 'litex-hub:master' into master
2022-02-08 12:20:35 -05:00
5a0f69502b
enable use of HBM for linux boot
2022-02-08 12:18:38 -05:00
420b9cd68d
Merge pull request #346 from Arusekk/patch-1
...
Fix seven_seg pin assignment typo in DE1-SoC
2022-02-08 16:42:33 +01:00
5d52bc5461
Fix seven_seg pin assignment in DE1-SoC
...
Fixes quartus build error:
```
Error (171016): Can't place node "seven_seg5[6]" -- illegal location assignment PIN_AA2 File: /home/arusekk/src/fpga-proj/build/de1soc/gateware/de1soc.v Line: 49
```
2022-02-08 09:03:53 +01:00
18e8bec9d4
xilinx/kv260: Minor cleanup and add Build/Use instructions (from PR).
2022-02-07 08:12:43 +01:00
8621700916
Merge pull request #345 from sergachev/feature/xilinx_kv260
...
Add Xilinx KV260 support
2022-02-07 07:53:55 +01:00
365b37b31c
Merge pull request #344 from benstobbs/patch-1
...
Add 85F to help for orangecrab device
2022-02-07 07:45:41 +01:00
1d8c3789af
add Xilinx KV260 support
2022-02-06 14:38:57 +01:00
617fa26acd
Add 85F to help for orangecrab device
...
The 85F orangecrab board exists, and works fine when this option is set to 85F, but leaving it out of the help is a bit confusing.
2022-02-06 10:36:58 +00:00
346623fd06
trellisboard: Rename Video I2C to videoi2c.
2022-02-04 09:26:31 +01:00
6d4fe82179
trellisboard: Rename hdmi_i2c to i2c (to have access to i2c_scan in the BIOS).
2022-02-02 11:08:21 +01:00
0522d8b0c5
trellisboard: Update i2c.add_init call.
2022-02-02 10:59:54 +01:00
7f4d464f1b
trellisboard: Add Video Terminal/Framebuffer support and use new I2C init feature to automatically configure TP410 at startup.
2022-02-02 09:52:12 +01:00
53007b3cb6
ignore ip directory and files
2022-02-01 14:24:48 -05:00
4251cfa865
terasic_de0nano: Add Build/Use instructions with JTAG-UART.
2022-02-01 15:58:34 +01:00
4d45611935
targets: Replace JTAG Atlantic (Deprecated) with JTAG-UART.
2022-02-01 11:30:26 +01:00
4281beac18
Merge pull request #343 from jevinskie/jev/deca-eth
...
DECA: Add Ethernet and Etherbone support
2022-01-31 16:23:17 +01:00
9144cb44fb
Merge branch 'master' into jev/deca-eth
2022-01-31 16:22:58 +01:00
3a6cc889d4
Merge pull request #341 from jevinskie/jev/altera-jtag
...
Add JTAGbone support to Terasic DECA
2022-01-31 16:07:18 +01:00
fbd424fc48
DECA: Add Ethernet and Etherbone support
...
Also fixed pcf_en IO standard compared to golden Arrow project.
2022-01-29 15:15:53 -08:00
9e5224ca49
Add JTAGbone support to Terasic DECA
...
Along the way I added UARTbone support to DECA as well for debugging.
Examples:
./terasic_deca.py --csr-csv csr.csv --with-jtagbone --build --load
litex_server --jtag --jtag-config ../prog/openocd_max10_blaster2.cfg
litex_term crossover
./terasic_deca.py --csr-csv csr.csv --uart-name jtag_uart --build --load
litex_term --jtag-config ../prog/openocd_max10_blaster2.cfg jtag
2022-01-27 14:13:58 -08:00
597e5ca142
Merge pull request #340 from trabucayre/digilent_z7_yosys-nextpnr_support
...
digilent arty z7: allows toolchain selection (PL only)
2022-01-26 21:20:19 +01:00
dd134a4b7d
digilent arty z7: allows toolchain selection (PL only)
2022-01-26 07:30:06 +01:00
74395ca80b
digilent_nexyx_video: Add default toolchain value to CRG (to avoid breaking existing designs).
2022-01-25 16:13:57 +01:00
624572f2e9
alinx_axu2gca: Review and do minor cosmetic changes.
2022-01-25 14:58:47 +01:00
367222c455
Merge pull request #339 from trabucayre/alinx_axu2cga
...
alinx_axu2gca: new board
2022-01-25 14:54:46 +01:00
537f04a13d
alinx_axu2gca: new board
...
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
2022-01-25 07:35:42 +01:00
Florent Kermarrec
Ilia Sergachev
Gwenhael Goavec-Merou
hubmartin
Sergiu Mosanu
Sergiu Mosanu
Arusekk
Ben Stobbs
Jevin Sweval