8c080e5fb6
soc/interconnect/csr: add initial field support
2019-09-13 20:01:31 +02:00
c120f6d457
build/openocd: add set_qe parameter to flash
...
QE bit is not set on blank SPI flashes and need to be set when SPI X4 is enabled in the bistream to load the FPGA.
2019-09-12 17:07:56 +02:00
6a0a1c9d87
tools/litex_term/upload: bufferize only chunks of the file instead of the entire file to speedup upload when used on embedded devices (RPI for example)
2019-09-12 10:21:37 +02:00
16b6b357ca
soc/integration/cpu_interface: don't raise OSError if we are not going to compile software and compilation toolchain is not found
2019-09-11 18:30:28 +02:00
62f53d5035
soc/integration/builder: call do_exit with vns when build is done.
2019-09-10 12:41:05 +02:00
cb5f1467cf
Merge branch 'master' of http://github.com/enjoy-digital/litex
2019-09-09 15:12:24 +02:00
004c96b508
soc/itnegration: update litedram
2019-09-09 15:12:08 +02:00
a7b5c18523
Merge pull request #255 from sergachev/fix-crc32
...
fix crc32
2019-09-09 13:38:29 +02:00
2400f0f43d
fix crc32
2019-09-09 13:19:43 +02:00
19f58dd971
interconnect/wishbone: add FlipFlop to allow UpConverter to be used
...
Note: a test should be added for Converter and DownConverter/UpConverter should be cleaned up
2019-09-09 11:47:36 +02:00
bd6ec63be4
build/openocd: add stream method for JTAG UART
2019-09-06 11:57:18 +02:00
b356204f95
soc_core: add JTAG UART support (uart_name="jtag_uart)
2019-09-06 11:56:42 +02:00
d0ebbda4b3
soc/cores/jtag: add Xilinx JTAG TAPs support and simple JTAG PHY (can be used for JTAG UART)
2019-09-06 11:55:41 +02:00
2638393b53
soc_zynq: fix indent
2019-09-05 15:59:35 +02:00
9051cf97e4
soc_zynq: fix typo
2019-09-05 15:55:18 +02:00
67a09aef05
soc/interconnect/stream: add Monitor module
...
Generic module to monitor endpoints activity: tokens/overflows/underflows that
can be plugged on a endpoint. Can be useful for various purpose:
- endpoint bandwidth calculation.
- underflows/overflows detection.
- etc...
2019-09-05 11:54:14 +02:00
6f150a5626
Merge pull request #254 from mithro/crc-smaller
...
Add @xobs' smaller CRC version
2019-09-03 07:23:32 +02:00
2a41f0d2a4
Use `SMALL_CRC` to enable smaller CRC versions.
...
@xobs created a smaller code size version of the CRC functions. Enable
these if someone uses the `SMALL_CRC` define.
2019-09-02 14:48:30 -07:00
083337441a
Remove extra whitespace.
2019-09-02 14:47:20 -07:00
c0e723868e
libbase: crc16: commit smaller version of crc16
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-09-02 14:44:18 -07:00
a59d0efca0
libbase: crc32: add smaller version
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-09-02 14:44:18 -07:00
27c334d440
Merge pull request #252 from mithro/only-change-on-contents
...
Only write file if contents will change.
2019-09-02 14:42:22 -07:00
3ff6a18a45
Only write file if contents will change.
2019-09-02 14:26:41 -07:00
a2938a7ae7
soc/cores: simplify JTAGAtlantic (only keep alt_jtag_atlantic instance), move to jtag and allow selecting it as uart with uart_name"jtag_atlantic"
2019-08-31 18:34:08 +02:00
19d3acfc71
Merge pull request #251 from micro-FPGA/master
...
atlantic JTAG UART working module
2019-08-31 18:33:27 +02:00
fb00ee85a2
Create atlantic.py
...
atlantic JTAG uart for Intel FPGA's, working and tested on Intel C10LP EK
2019-08-30 09:35:10 +02:00
41fe7cae0b
core/spi: add minimal SPISlave
2019-08-29 09:46:20 +02:00
b845755995
gen/fhdl/verilog: allow single element verilog inline attribute
2019-08-28 05:24:11 +02:00
5a7b4c3406
targets/nexys_video: generate clk100
2019-08-27 14:06:13 +02:00
c179741cf3
software/bios: switch to standard CRLF
...
Avoid setting terminal to "implicit CR in every LF" mode.
2019-08-27 09:45:44 +02:00
0328ba7d6c
tools/litex_term: add automatic check to see if we need to insert LF or not
2019-08-26 18:17:43 +02:00
ffebd2076c
bios/tools: allow disabling CRC check on serialboot (to speedup debug/loading large images when only serial is available)
2019-08-26 17:15:01 +02:00
4842bdcf08
tools/litex_term: add sdl_payload_length
2019-08-26 12:10:11 +02:00
3e30c64842
litex_setup: add litex-boards
2019-08-26 09:28:58 +02:00
d79cd87dd6
Merge pull request #246 from gsomlo/gls-native-rv64
...
software: use native toolchain for same host, target architectures
2019-08-23 21:36:51 +02:00
6d844a038a
software: use native toolchain for same host, target architectures
...
LiteX rightfully assumes that most often the target software must
be cross-compiled from an x86 host platform. However, LiteX can be
also built on a 'linux-riscv64' platform (e.g. Fedora's riscv64
port), where the software for riscv64 targets should be compiled
using the native toolchain.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2019-08-23 09:04:55 -04:00
d36f1fb7d2
Merge pull request #244 from atommann/master
...
changing http to https
2019-08-17 11:54:39 +02:00
a45dbee54f
changing http to https
2019-08-17 16:02:10 +08:00
92e5b4b2cd
Merge pull request #2 from enjoy-digital/master
...
update with hyperram and other changes
2019-08-16 14:36:59 +02:00
4990bf33c0
soc/core: simplify/cleanup HyperRAM core
...
- rename core to hyperbus.
- change layout (cs_n with variable length instead of cs0_n, cs1_n).
- use DifferentialOutput when differential clock is used.
- add test (python3 -m unittest test.test_hyperbus).
Usage example:
from litex.soc.cores.hyperbus import HyperRAM
self.submodules.hyperram = HyperRAM(platform.request("hyperram"))
self.add_wb_slave(mem_decoder(self.mem_map["hyperram"]), self.hyperram.bus)
self.add_memory_region("hyperram", self.mem_map["hyperram"], 8*1024*1024)
2019-08-16 14:04:58 +02:00
f47e4978f2
libero enable enhanced constraints
...
Libero 12.0 does not support any more classic constraint flow
2019-08-16 10:31:53 +02:00
d1502d4195
soc/cores: add initial simple hyperram core
2019-08-16 09:48:17 +02:00
6e6fe83af3
build/altera/quartus: add add_ip method to use Quartus QSYS files
...
platform.add_ip("my_ip.qsys")
2019-08-15 13:45:29 +02:00
2899928aba
cpu_interface: add json csr map export, simplify csv csr map export using json
2019-08-15 09:27:33 +02:00
9d4b7cd515
bios/sdram: set init done after memtest (for standalone LiteDRAM controllers)
2019-08-14 19:09:58 +02:00
0cd4e45f48
build/xilinx/vivado: use "" for strings
2019-08-14 19:03:10 +02:00
8d161a47cf
build/xilinx/vivado: remove with_phys_opt
2019-08-14 19:02:01 +02:00
f6638ded13
Merge pull request #243 from sergachev/master
...
build/xilinx/vivado: improve directive support
2019-08-14 18:58:15 +02:00
ccc2cbd9d4
Merge pull request #241 from railnova/zynq
...
[fix] prevent Vivado from inferring DSP48 in AXIBurst2Beat
2019-08-14 18:55:34 +02:00
861eea8a07
build/xilinx/vivado: improve directive support
2019-08-14 17:49:13 +02:00
Florent Kermarrec
Ilia Sergachev
Tim 'mithro' Ansell
Sean Cross
Antti Lukats
Gabriel L. Somlo
atommann