87c26a30fd
soc/cores/cpu/zynq7000: add enet0, enet0_mdio, sdio, sdio_cd and sdio_wp only when configured in EMIO mode
2020-08-06 16:45:39 +02:00
d5062d1f4f
Merge pull request #623 from Dolu1990/vexriscv_smp
...
cpu/vexriscv_smp Add --with-coherent-dma --without-coherent-dma
2020-08-06 14:31:20 +02:00
07a8e696ce
cpu/vexriscv_smp Add --with-coherent-dma
2020-08-06 13:33:11 +02:00
9a4c5aa1ef
integration/soc/add_sdram: update rules to connect main bus to dram.
...
Requires connection when CPU does not have memory buses of when CPU has memory buses
but no DMA bus.
2020-08-05 18:01:12 +02:00
a1644510bf
cpu/vexriscv_smp: fix args_read.
2020-08-05 17:59:30 +02:00
896b68cd6b
cpu/vexriscv_smp: cleanup, fix coherent_dma connection.
2020-08-05 17:25:13 +02:00
342f359e1c
Merge pull request #622 from antmicro/fix_connectors
...
arty: Change USB-uart and I2S Pmod configuration
2020-08-05 12:30:34 +02:00
3b293612a8
soc/interconnect/axi: minor cleanups.
2020-08-05 12:11:28 +02:00
303d6cca7e
interconnect/stream: set default AsyncFIFO depth to None and add depth parameter to ClockDomainCrossing.
2020-08-05 12:11:12 +02:00
de9ea19cc7
arty: Change USB-uart and I2S Pmod configuration
...
This makes it compatible with the Arty A7 expansion board by Antmicro
(https://github.com/antmicro/arty-expansion-board ).
2020-08-05 11:38:51 +02:00
00629c45b0
interconnect/csr: add CSR registers ordering support.
...
The original CSR registers ordering (big: MSB on lower addresses) is not convenient
when the SoC is interfaced with a real OS (for example as a PCIe add-on board or
with a CPU running Linux).
With this, the original ordering is kept as default (big), but it can now be switched
to little to avoid software workarounds in drivers and should probably be in the future
the default for PCIe/Linux SoCs.
2020-08-05 08:57:19 +02:00
ee7a7f4693
soc/interconnect/csr: improve ident.
2020-08-05 07:59:35 +02:00
b1008b0164
integration/soc: add expection on decoder when full address space is mapped.
2020-08-04 19:56:26 +02:00
b831dc8c55
wishbone: revert default adr_width to 30.
2020-08-04 19:55:46 +02:00
abc49964ea
tools/litex_json2dts: add missing copyrights.
2020-08-04 16:38:02 +02:00
aed0dcee4c
setup: add litex_json2dts to console_scripts.
2020-08-04 16:07:53 +02:00
b64209b38b
Merge pull request #620 from antmicro/add_litex_json2dts
...
Add Linux DT generation script
2020-08-04 16:04:57 +02:00
0ca99b798f
build/sim/config: add default_clk/default_clk_freq parameters for retro-compatibility with previous API.
2020-08-04 15:49:53 +02:00
696ea468b8
build/sim: use json_object_get_int64 instead of json_object_get_uint64.
...
json_object_get_uint64 does not seem supported with old json-c versions.
2020-08-04 15:49:26 +02:00
382c1a3a44
Merge pull request #619 from antmicro/jboc/sim-clocker
...
Allow to define multiple simulation clocks
2020-08-04 15:38:28 +02:00
fafa844aa7
json2dts: Add Linux DT generation script
2020-08-04 15:13:17 +02:00
f778ff09dc
build/sim: improve timebase calculation (strict checks) and update modules
2020-08-04 14:00:58 +02:00
e0f131a317
cores/uart: add txempty/rxfull CSRs.
...
Useful in some use cases, like flushing tx.
2020-08-04 13:50:46 +02:00
2a3e39b10e
tools/litex_server: enable read_merger with CommUDP.
...
Limited to 4 (current size of the buffer in liteeth.frontend.etherbone).
2020-08-04 10:55:51 +02:00
a5d0a340c3
test: specify wishbone adr_width on AXI(Lite)<-->Wishbone tests and remove debug traces.
2020-08-04 09:39:23 +02:00
eb3374d00a
Merge pull request #617 from gsomlo/gls_rocket_dma
...
RFC: enable DMA with Rocket
2020-08-04 09:38:58 +02:00
561331ed97
debug: make CI print offending values
2020-08-03 16:59:39 -04:00
df3428be07
liblitesdcard/sdcard: (temporarily) slow down SDCARD_CLK_FREQ to 25MHz
...
Rocket's DMA slave interface (and/or internal routing) currently
appears unable to route DMA writes from LiteSDCard at frequencies
above 25MHz (as tested on nexys4ddr, with Rocket, at 75MHz main
system clock frequency).
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-08-03 16:14:11 -04:00
2d9dc8f939
cores/cpu/rocket: expose slave port for DMA
...
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-08-03 16:14:11 -04:00
d8161e5a86
integration/soc: make DMA slave region cover (at least) the lower 4GB
...
Assuming we currently support a 32-bit (4GB) physical address space,
ensure that the dma_bus slave covers the entire range, covering any
possible layout of the LiteX SoC memory map (e.g., rocket has MMIO
in a wide range of registers located below 2GB, and DRAM starting at
the 2GB mark, needing DMA accesses to be routed appropriately for the
entire 4GB physical address range).
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-08-03 16:14:11 -04:00
70eae5cbf9
interconnect/wishbone: increase WB address width to 31
...
This is needed to support memory regions up to 4GB in size (currently
limited to 2GB, or 0x8000_0000).
FIXME: CI complains about assertions re. axi_lite.address_width in
relationship to len(wishbone.adr) and wishbone_adr_shift, which
seems to be a problem on the 32bit (vexriscv?) CPU used for CI,
but seems to work fine on Rocket.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
foo
2020-08-03 16:11:26 -04:00
b8c9da81ea
soc/interconnect/axi: add Wishbone2AXI converter
2020-08-03 12:50:00 -04:00
2ec4604c41
cores/gpio: add support for Record on GPIOOut, GPIOIn and GPIOInOut.
2020-08-03 18:47:17 +02:00
c1ae7e596c
build/sim: allow for arbitrary clocks generation using clockers
2020-08-03 17:06:38 +02:00
38054874ac
build/sim: use a real timebase in the simulation
2020-08-03 15:21:24 +02:00
5e53e5d73a
Merge pull request #615 from pepijndevos/openfpgaloader
...
Add openFPGALoader programmer
2020-08-03 14:01:50 +02:00
79ca4d9640
remove debugging
2020-08-01 11:07:04 +02:00
f6e20700d4
add openFPGAloader programmer
2020-08-01 11:05:09 +02:00
eab0726cc8
cpu/vexriscv/core: use variant name as human_name.
...
Allow it to be shown in the BIOS and help support.
2020-07-31 08:59:53 +02:00
e0a763e534
cpu/vexriscv/system.h: provide empty flush_cpu_i/dcache functions for variants with no i/d cache.
2020-07-31 08:58:30 +02:00
3ff1bcaf05
cpu/zynq7000: set csr map to 0x00000000.
2020-07-30 21:37:25 +02:00
c0253e3f77
Merge pull request #611 from antmicro/jboc/axi-lite
...
soc/interconnect/axi: add AXILite -> AXI converter
2020-07-30 14:22:21 +02:00
cc8440549f
tools/litex_server/read_merger: review/simplify a bit.
2020-07-30 13:58:40 +02:00
4f382ccf55
Merge pull request #605 from cklarhorst/feature-uart-read-merger
...
Merge sequential reads for the UART litex_server backend
2020-07-30 13:56:48 +02:00
e78d950a31
soc/interconnect/axi: add AXILite -> AXI converter
2020-07-30 13:50:34 +02:00
a942e358b9
cpu/blackparrot: minor cleanups, add sim variant (since use different flist).
2020-07-30 12:10:32 +02:00
86e910dfaa
Merge pull request #610 from Dolu1990/vexriscv_smp
...
soc/cores/cpu/vexriscv_smp enable dynamic litedram datawidth
2020-07-29 18:11:00 +02:00
023ab15ec1
soc/cores/cpu/vexriscv_smp enable dynamic litedram datawidth
2020-07-29 12:40:16 +02:00
e5cd5d5466
Merge branch 'master' into vexriscv_smp
2020-07-29 11:14:09 +02:00
1938ce363d
integration/soc/add_sdram: allow the CPU to add the direct memory buses when adding the sdram.
...
This is useful for CPUs elaborated at buildtime to use sdram's native data width on the CPU memory ports.
2020-07-29 11:10:05 +02:00
Gwenhael Goavec-Merou
enjoy-digital
Dolu1990
Pawel Sagan
Mateusz Holenko
Jędrzej Boczar
Gabriel Somlo
Pepijn de Vos