769d15d433
cores/spi: move CSR control/status to add_control method, add loopback capability and simple xfer loopback test
...
Moving control/status registers to add_control method allow using SPIMaster directly with exposed signals.
Add loopback capability (mostly for simulation, but can be useful on hardware too).
2019-07-13 12:55:19 +02:00
ee8fec10ff
soc/cores: add ECC (Error Correcting Code)
...
Hamming codes with additional parity (SECDED):
- Single Error Correction
- Double Error Detection
2019-07-13 11:44:29 +02:00
4c18c991bc
cores: add ICAP core (tested with reconfiguration commands)
2019-07-05 18:30:34 +02:00
6b82f23ce1
cores: add simple and minimal hardware SPI Master with CPOL=0, CPHA=0 and build time configurable data_width and frequency.
2019-07-05 15:50:58 +02:00
7cd5c0f39b
cores: add bitbang class with minimal hardware for I2C/SPI software bit-banging
2019-07-05 14:26:10 +02:00
dc03b7fab9
boards: community supported boards are now located at https://github.com/litex-hub/litex-boards
2019-06-24 12:05:02 +02:00
c7f36ab08f
test: add copyright header
2019-06-23 23:31:11 +02:00
ab1f580470
test/test_axi: remove litex.gen.sim import (was only useful for debug)
2019-06-12 11:28:06 +02:00
38a2d89a25
test/test_code8b10b: add test_coding
2019-06-10 18:53:30 +02:00
8fdd5220b3
test/test_prbs: add PRBSGenerator/Checker tests
2019-06-10 16:19:23 +02:00
55ebcc00eb
test/test_targets: add de10lite
2019-06-05 20:03:19 +02:00
b300c32103
test/test_targets: add de2_115, de1soc
2019-06-02 19:22:09 +02:00
67159349d6
soc/interconnect: remove axi_lite
...
axi_lite code was defining AXI4Lite signals and doing a AXI4Lite bridge to the
CSR bus when LiteX was not having proper AXI support. LiteX now has proper AXI
support and it also cover what axi_lite was doing: To create a AXILite to CSR
bus, user can create an AXILite2Wishbone bridge and then connect the CSR bus
directly to the wishbone bus as done in the others non-AXI SoC.
2019-05-11 09:12:20 +02:00
745d83a332
boards: add initial NeTV2 support (clocks, leds, dram, ethernet)
2019-05-10 18:55:40 +02:00
3ee9ce0529
test/test_targets: fix test_ulx3s name
2019-05-09 11:48:57 +02:00
74d37465b3
test/test_targets: comment bad variant tests for now
2019-04-29 17:11:42 +02:00
5c1d980540
soc/interconnect/axi: add burst support to AXI2Wishbone
2019-04-29 16:49:20 +02:00
6de2713524
soc/interconnect/axi: add capabilities to AXIBurst2Beat and simplify/optimize
2019-04-29 14:02:05 +02:00
5cbc5bc199
Adding testing of cpu variants.
2019-04-26 18:57:49 -05:00
f7c0b118ce
test/test_targets: cover all platforms
2019-04-23 11:38:18 +02:00
7d278854d5
global: switch to VexRiscv as the default CPU
...
VexRiscv can now replace LM32 for almost all usecases and we now have better
software support with RISC-V.
2019-04-22 09:41:07 +02:00
28d80bd641
ci: fix test_targets/test_simple
2019-04-22 08:53:43 +02:00
b7f53fb93c
test: remove waveforms generation
2019-04-22 08:41:28 +02:00
e98ac680c1
travis: simplify, enable and add RISC-V toolchain to build targets
2019-04-22 08:32:00 +02:00
9cbed91b3e
soc/interconnect/axi: add AXIBurst2Beat
...
Converts AXI bursts commands to AXI beats.
2019-04-19 12:13:16 +02:00
ed2578799b
test: add test_axi_lite (with test code from soc/interconnect/axi_lite lightly modified)
2019-02-27 22:24:56 +01:00
6a4c133cd2
test: add basic test_csr
2019-02-27 21:46:00 +01:00
68e1dfca28
boards: avoid duplicating platforms that can be found in migen/litex-buildenv
...
The platforms that are kept are the ones used for litex development.
2019-01-06 19:01:19 +01:00
5137c2bf88
test/test_targets: update
2018-11-17 17:36:57 +01:00
a5ed42ec68
soc/interconnect/stream: add Gearbox
2018-11-17 17:29:45 +01:00
11d536dc4d
test: remove test_bitslip (integrated in migen)
2018-11-17 17:29:09 +01:00
0b0e3ac1dd
test/test_targets: test simple design with all platforms
2018-09-24 02:02:14 +02:00
e04530e0c4
test/test_targets: update and reorganize targets
2018-09-24 01:15:33 +02:00
1925ba176f
replace litex.gen imports with migen imports
2018-02-23 13:38:19 +01:00
e0ce485a17
test/test_gearbox: continue, but we are hitting a simulator bug (related to clock domains declared in modules)
2017-04-25 10:57:34 +02:00
3ca0cb0cea
test: add test_gearbox skeleton
2017-04-24 21:41:46 +02:00
b4ebfb4031
test/test_targets: check top.v generation
2017-04-24 19:25:58 +02:00
35e3d93d9b
test: add basic test_targets.py
2017-04-24 19:13:17 +02:00
dc66dfcb55
test: add test_bitslip (initially in litedram)
2017-04-24 18:50:06 +02:00
96898f1b39
add test directory with test_code_8b10b.py (from misoc)
2017-04-24 18:46:55 +02:00
Florent Kermarrec
Tim 'mithro' Ansell