bd1d456f5d
flow/actor, actorlib/structuring: add packet support
2014-11-01 21:22:46 +08:00
4d1b6da42f
bus/csr: add configurable address_width (needed more than 32 modules with CSR)
2014-11-01 21:22:11 +08:00
fcf2f7517c
crc: generate error asynchronously to avoid stalling the flow and simplify
2014-11-01 21:21:46 +08:00
648ab8fa7a
kc705: add Ethernet pins
2014-11-01 21:11:47 +08:00
c0c04a1878
xilinx_vivado: use .bat on Windows platforms (otherwise Vivado uses Unix scripts...)
2014-11-01 20:59:19 +08:00
51f699758c
xilinx_vivado: add hierarchical utilization report
2014-11-01 20:57:54 +08:00
a4782899f6
fhdl/verilog: fix tristate to instance connection
2014-10-29 18:18:17 +08:00
8c5c32751e
add input pipe stage option
2014-10-28 20:53:26 +01:00
25e0ccae9a
remove DRP ports (won't be used for now)
2014-10-28 11:33:15 +01:00
3f7406a937
various fixes and simplifications, SATA1 & SATA2 OK
2014-10-28 02:15:19 +01:00
286092b62e
Raise exception when not using correct boolean operators
2014-10-27 19:40:22 +08:00
e2cbb3a048
platforms: merge but keep support for iMPACT for now (xc3sprog need to be tested on Windows)
2014-10-24 12:32:08 +02:00
86abb253c8
flow/actor/Endpoint: clean up __getattr__
2014-10-22 09:35:30 +08:00
37031e3a2f
DMAWriteController: fix Demultiplexer layout
2014-10-20 23:58:16 +08:00
8e4b89849c
use new direct access on endpoints
2014-10-20 23:13:37 +08:00
07c33279c2
use new direct access on endpoints
2014-10-20 23:12:16 +08:00
ff688fb2f9
_Endpoint: allow direct access of payload elements
2014-10-20 23:09:56 +08:00
34ed315a48
remove trailing whitespaces
2014-10-17 17:14:40 +08:00
dbaeaf7833
remove trailing whitespaces
2014-10-17 17:08:46 +08:00
d860813dec
use new direct access on endpoints
2014-10-16 17:57:30 +02:00
22507b117c
bank: add re to CSRStorage
...
being able to know when a register is updated is useful in many cases and avoid having to handle another register for that.
re is asserted when the the last CSR of the Compound is written. Software must also write Compound in the right order.
2014-10-16 17:43:41 +08:00
bbfce2b707
ctrl: drive txcomwake and not gtx.txcomwake in K7SATAPHYDeviceCtrl
2014-10-16 10:38:26 +02:00
9649b1497c
uart2wishbone: fix missing payload.d
2014-10-16 09:37:43 +02:00
2319ee0ab7
uart2wishbone: always use payload.d and not .d
2014-10-15 12:13:22 +02:00
027ddc65ca
fill __init__.py to simplify imports
2014-10-10 17:24:36 +02:00
bf95ea6c1c
mila: simplify usage
2014-10-10 16:17:12 +02:00
d0c9838dca
uart2wishbone: share UARTRX and UARTTX with MiSoC
2014-10-10 15:15:58 +02:00
20528c622a
mor1kx: sync
2014-10-10 15:38:05 +08:00
e53fb88b85
uart: minor cleanup and fix
2014-10-10 15:33:27 +08:00
5e5f436aa6
uart: split it and use dataflow
...
This make the code easier to understand and allow the reuse of UARTRX & UARTTX
on designs without CPU (e.g miscope).
2014-10-10 15:24:47 +08:00
ba30a01830
mila: fixes when used without RLE
2014-10-06 12:30:06 +02:00
f72f11f7b4
mila: add clk_domain support
...
an AsyncFIFO is inserted when clk_domain is not "sys" to enable capture from another clock domain.
sys_clk frequency need to be greater than clk_domain clock.
future possible improvement: automatic insertion of a converter when clk_domain frequency is
greater than sys_clk.
2014-10-06 12:07:20 +02:00
7043e6a5f3
mila: simplify export
2014-10-01 10:06:59 +02:00
b284819d18
revert simulation design and add wave
2014-09-30 11:10:15 +02:00
110580eb2e
add .payload. to Sink and Source to be compatible with upstream Migen
2014-09-30 11:03:36 +02:00
f5001751d0
instanciate GTXE2_COMMON (seems recommended in AR43339)
2014-09-30 10:57:52 +02:00
cf084fd079
test to visualize OOB with Miscope
2014-09-30 10:17:15 +02:00
bc5b23b808
use SGMII clk (125MHz) and SFP for test on KC705
2014-09-30 09:07:15 +02:00
d47917e480
simplify and clean up
2014-09-30 00:50:03 +02:00
0791b9e2e4
sim working
2014-09-29 17:12:02 +02:00
b47153fbfa
fix alignment (still some transmissions errors --> need to check clocks and resets)
2014-09-29 15:37:35 +02:00
15f67b30d0
genlib/fsm: make first fsm.act() the reset state, even when using after_*/before_* methods before fsm.act
2014-09-29 19:38:58 +08:00
ed752758b0
fix and simplify ctrl fsms, OOB OK, align KO
2014-09-27 17:45:46 +02:00
2f769e4e4e
gtx: add resynchronization on control signals
2014-09-27 17:26:05 +02:00
f23c5aa724
mmcm: configure default divider with default_speed
2014-09-27 16:22:40 +02:00
45f7f8aff5
add tx_reset_fsm and rx_reset_fsm
2014-09-27 16:10:39 +02:00
c27f24c4c0
reorganize code
...
- use sys_clk of 166.66MHz and using it instead of sata clk.
- rename clocking to CRG since it also handles resets.
- create datapath and move code from gtx.
2014-09-27 15:34:28 +02:00
879478a6e4
clocking: clean up and add comments
2014-09-27 13:33:43 +02:00
387cf90cf8
host and device communicate with OOB, now need to fix ctrl
2014-09-26 23:30:30 +02:00
01da43ecb2
reset and lock of PLL OK. We see OOB signals on the link but they are not decoded by the device.
2014-09-26 22:31:32 +02:00
Florent Kermarrec
Sebastien Bourdeauducq
Yann Sionneau