14012263af
Merge pull request #1758 from motec-research/spi_mmap_fix
...
soc/cores/spi_mmap: Fix clock divider
2023-09-01 08:38:53 +02:00
d494e30166
soc/cores/spi_mmap: Fix clock divider
2023-09-01 12:34:51 +10:00
405296b7fd
interconnect/axi/axi_full: Fix missing switch to LiteXModule.
2023-08-31 19:36:21 +02:00
516038ce76
soc/cores/clock/efinix: don't hardcore create_clock (fix warning because clock is created after set_false_path), explicit clock name (fix warning when signal is absorbed)
2023-08-31 17:24:58 +02:00
fadf47d353
build/lattice/trellis: fix add_period_constraint signature (missing keep arg)
2023-08-31 16:52:48 +02:00
41357aba7d
xilinx/vivado: Fix issue with #1755 .
2023-08-31 16:38:50 +02:00
ad924a522a
interconnect/stream/AsyncFIFO: Remove Efinix workaround since seems to be solved with Efinity 2023.x.
2023-08-31 16:03:52 +02:00
124e0d22c9
Merge pull request #1755 from enjoy-digital/allows_clk_name_override
...
build/xx/toolchains: allows override clock naming
2023-08-31 15:57:39 +02:00
46800176ae
build/xx/toolchains: allows override clock naming
2023-08-31 15:18:15 +02:00
2a7caa2696
build: all platforms: override add_period_constraint only when required
2023-08-31 12:29:09 +02:00
3f43481eb9
build/efinix/efinity: build_timing_constraints: set_false_path is unidirectional -> add another one to -> from_
2023-08-31 11:42:07 +02:00
a071cc343d
litex/soc/integration/soc: add_etherxx: when eth_rx_clk is eth_tx_clk only apply constraints on eth_rx_clk
2023-08-31 11:36:24 +02:00
9854c9f322
CHANGES: Update.
2023-08-30 18:11:11 +02:00
ff0df100e9
build/efinix: Add get_pin (from sig) to EfinixPlatform and use it to simplify/fix IOs exclusion.
2023-08-30 18:08:40 +02:00
72590dfde3
software/libliteeth: Fix udp_set_callback warning.
2023-08-30 17:44:00 +02:00
434e2225ea
software/liblitedram: Fix swap_bit warning.
2023-08-30 17:22:57 +02:00
c2714df198
build/efinix/common: Add initial EfinixDDROutput/EfinixDDRInput implementation.
...
Still need to figure out a few things:
- Clk is passed as a string for now.
- IOs exclusion still handled externally.
2023-08-30 11:28:48 +02:00
c0ab4ed1c1
build/io: Allow passing clk as str on DDRInput/Output, wrap DDROutput IOs and minor ident fixes.
2023-08-30 10:52:13 +02:00
6dff371835
build/efinix/common: Simplify IO exclusion in EfinixTristateImpl and fix corner cases (ex eth_mdio that was not automatically excluded).
2023-08-30 09:16:46 +02:00
9528f89d45
CHANGES: Update.
2023-08-29 17:15:45 +02:00
85dadb827a
clock/gowin_gw5a: Fix copyright.
2023-08-29 14:25:04 +02:00
c122fef5ac
Merge pull request #1741 from Icenowy/gw5apll
...
soc/cores/clock: initial GW5A support
2023-08-29 14:21:02 +02:00
1636c0ef8d
soc/cores/clock: initial GW5A support
...
GW5A has different PLLs than GW1N/GW2A, with multiple individual
ODIV's. GW5A-25 has a different PLL with GW5A[S]T-138, with lack of
dynamic control.
Add basic support for them.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-08-29 15:39:25 +08:00
a4498dcd03
nax dma wip, WARNING soc.py
2023-08-28 18:57:45 +02:00
82602f660c
interconnect/stream: Fix #1736 .
2023-08-28 16:19:31 +02:00
70e52b76fa
CHANGES: Update.
2023-08-28 16:04:43 +02:00
d29d2c09bb
interconnect/stream: Minor review/cleanup.
2023-08-28 16:02:52 +02:00
8efcc4fdea
Merge pull request #1736 from rowanG077/buf-endpoint-cfg
...
soc/interconnect/stream: BufferizeEndpoints params
2023-08-28 15:58:46 +02:00
f7b35f09ae
build/efinix/efinity: don't hardcode efinity version, read from scripts/sw_version.txt
2023-08-28 14:43:17 +02:00
8f54386aab
gen/fhdl/module: Add some comments.
2023-08-24 09:17:35 +02:00
a125f9aa6f
Merge pull request #1752 from enjoy-digital/naxriscv_update
...
cpu/naxriscv: Update recommended version.
2023-08-22 16:29:08 +02:00
6d8c04b401
cpu/naxriscv: Update recommended version.
2023-08-22 15:50:08 +02:00
8f7f97a713
fix plic/clint regions + dts
2023-08-18 19:29:41 +02:00
8302cf2e79
got nax 2 cores to run linux
2023-08-18 10:01:28 +02:00
1520d0f382
Merge pull request #1745 from alexey-morozov/master
...
Litex offline installation fix
2023-08-16 15:18:57 +02:00
cd1012470e
To allow offline installation, the "liteiclink" package has to be installed before the "liteeth" package. Otherwise, to satisfy the dependency requirements, the setup will attempt to download the "liteiclink" package from the internet and will consequently fail.
2023-08-16 09:39:03 +02:00
4d7a7f5ba1
Merge pull request #1742 from Icenowy/gwddrfix
...
build/gowin/common: Fix DDRInput
2023-08-16 08:01:29 +02:00
c1d8db396d
build/gowin/common: Fix DDRInput
...
The DDRInput of Gowin seems to be never used and contains a typo that
prevents it from being really used.
Fix this typo.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-08-11 14:56:56 +08:00
577674bff2
test: Add minimal test_spi_mmap with simulation of SPIMaster.
2023-08-04 17:51:22 +02:00
688dae0112
cores/spi: Add new SPIMMAP core allowing doing SPI accesses directly from MMAP.
...
Implements a new SPIMMAP module, allowing accessing multiple SPI peripherals directly
from MMAP. It allows configurable SPI transactions: mode, bit order, and data width.
Developed and funded through a collaboration with MoTeC.
Example of integration:
# SPI MMAP ---------------------------------------------------------------------------------
spi_pads = Record([("clk", 1), ("cs_n", 8), ("mosi", 1), ("miso", 1)])
spi_mmap_tx_region = SoCRegion(origin=0x8000_0000, size=4096, cached=False)
spi_mmap_rx_region = SoCRegion(origin=0x8000_1000, size=4096, cached=False)
self.spi_mmap = SPIMMAP(
pads = spi_pads,
data_width = 32,
sys_clk_freq = sys_clk_freq,
tx_origin = spi_mmap_tx_region.origin,
rx_origin = spi_mmap_rx_region.origin,
tx_fifo_depth = 32,
rx_fifo_depth = 32,
)
self.bus.add_slave(name="spi_tx",
slave = self.spi_mmap.tx_mmap.bus,
region = spi_mmap_tx_region,
)
self.bus.add_slave(name="spi_rx",
slave = self.spi_mmap.rx_mmap.bus,
region = spi_mmap_rx_region,
)
self.irq.add("spi_mmap", use_loc_if_exists=True)
Example of use from CPU C firmware:
/* SPI TX Offsets */
#define SPI_TX_CTRL_ENABLE (1 << 0)
#define SPI_TX_CTRL_THRESHOLD (1 << 16)
#define SPI_TX_STAT_ONGOING (1 << 0)
#define SPI_TX_STAT_EMPTY (1 << 1)
#define SPI_TX_STAT_FULL (1 << 2)
#define SPI_TX_STAT_LEVEL (1 << 16)
/* SPI RX Offsets */
#define SPI_RX_CTRL_ENABLE (1 << 0)
#define SPI_RX_CTRL_THRESHOLD (1 << 16)
#define SPI_RX_STAT_ONGOING (1 << 0)
#define SPI_RX_STAT_EMPTY (1 << 1)
#define SPI_RX_STAT_FULL (1 << 2)
#define SPI_RX_STAT_LEVEL (1 << 16)
/* SPI TX/RX Engine */
#define SPI_TX_RX_ENGINE_ENABLE (1 << 0)
/* SPI SLOT Offsets */
#define SPI_SLOT_ENABLE (1 << 0)
#define SPI_SLOT_MODE (1 << 1)
#define SPI_SLOT_LENGTH (1 << 3)
#define SPI_SLOT_BITORDER (1 << 5)
#define SPI_SLOT_LOOPBACK (1 << 6)
#define SPI_SLOT_DIVIDER (1 << 16)
/* SPI SLOT Values */
#define SPI_SLOT_MODE_0 0b00
#define SPI_SLOT_MODE_3 0b11
#define SPI_SLOT_LENGTH_32B 0b00
#define SPI_SLOT_LENGTH_16B 0b01
#define SPI_SLOT_LENGTH_8B 0b10
#define SPI_SLOT_BITORDER_MSB_FIRST 0b0
#define SPI_SLOT_BITORDER_LSB_FIRST 0b1
#define SPI_SLOT_EV_TX (1 << 0)
#define SPI_SLOT_EV_RX (1 << 1)
/* Test SPI with various length (BE) */
void test_spi_length_8_16_32(void) {
volatile unsigned char *spi_tx_8 = (unsigned char *)SPI_TX_BASE;
volatile unsigned short *spi_tx_16 = (unsigned short *)SPI_TX_BASE;
volatile unsigned int *spi_tx_32 = (unsigned int *)SPI_TX_BASE;
volatile unsigned char *spi_rx_8 = (unsigned char *)SPI_RX_BASE;
volatile unsigned short *spi_rx_16 = (unsigned short *)SPI_RX_BASE;
volatile unsigned int *spi_rx_32 = (unsigned int *)SPI_RX_BASE;
int errors = 0;
printf("Test SPI with various length (BE): 8, 16 and 32-bit...\n");
/* Configure Slots */
spi_mmap_ctrl_slot_control0_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_0 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_MSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
4 * SPI_SLOT_DIVIDER
);
spi_mmap_ctrl_slot_control1_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_0 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_MSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
4 * SPI_SLOT_DIVIDER
);
spi_mmap_ctrl_slot_control2_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_0 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_MSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
4 * SPI_SLOT_DIVIDER
);
spi_mmap_ctrl_slot_control3_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_0 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_MSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
4 * SPI_SLOT_DIVIDER
);
/* Enable SPI Engine */
spi_mmap_tx_rx_engine_control_write(1 * SPI_TX_RX_ENGINE_ENABLE);
/* TX 8-bit transfers */
spi_tx_8[0] = 0x5a;
spi_tx_8[4] = 0x01;
spi_tx_8[8] = 0x5a;
spi_tx_8[12] = 0x01;
/* TX 16-bit transfers */
spi_tx_16[0] = 0x5aa5;
spi_tx_16[2] = 0x0102;
spi_tx_16[4] = 0x5aa5;
spi_tx_16[6] = 0x0102;
/* TX 32-bit transfers */
spi_tx_32[0] = 0x5aa55aa5;
spi_tx_32[1] = 0x01020304;
spi_tx_32[2] = 0x5aa55aa5;
spi_tx_32[3] = 0x01020304;
/* Small delay */
busy_wait(1);
/* Read RX 8-bit transfers */
if (spi_rx_8[ 0] != 0x5a)
errors++;
if (spi_rx_8[ 4] != 0x01)
errors++;
if (spi_rx_8[ 8] != 0x5a)
errors++;
if (spi_rx_8[12] != 0x01)
errors++;
/* Read RX 16-bit transfers */
if (spi_rx_16[0] != 0x5aa5)
errors++;
if (spi_rx_16[2] != 0x0102)
errors++;
if (spi_rx_16[4] != 0x5aa5)
errors++;
if (spi_rx_16[6] != 0x0102)
errors++;
/* Read RX 32-bit tranfers */
if (spi_rx_32[0] != 0x5aa55aa5)
errors++;
if (spi_rx_32[1] != 0x01020304)
errors++;
if (spi_rx_32[2] != 0x5aa55aa5)
errors++;
if (spi_rx_32[3] != 0x01020304)
errors++;
/* Disable SPI Engine */
spi_mmap_tx_rx_engine_control_write(0 * SPI_TX_RX_ENGINE_ENABLE);
/* Result */
printf("errors: %d\n", errors);
}
/* Test SPI with various clk divider */
void test_spi_clk_divider(void) {
volatile unsigned int *spi_tx_32 = (unsigned int *)SPI_TX_BASE;
volatile unsigned int *spi_rx_32 = (unsigned int *)SPI_RX_BASE;
int errors = 0;
printf("Test SPI with various clk divider: 4, 8, 16 and 32...\n");
/* Configure Slots */
spi_mmap_ctrl_slot_control0_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_0 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_MSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
4 * SPI_SLOT_DIVIDER
);
spi_mmap_ctrl_slot_control1_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_0 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_MSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
8 * SPI_SLOT_DIVIDER
);
spi_mmap_ctrl_slot_control2_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_0 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_MSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
16 * SPI_SLOT_DIVIDER
);
spi_mmap_ctrl_slot_control3_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_0 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_MSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
32 * SPI_SLOT_DIVIDER
);
/* Enable SPI Engine */
spi_mmap_tx_rx_engine_control_write(1 * SPI_TX_RX_ENGINE_ENABLE);
/* TX 32-bit transfers */
spi_tx_32[0] = 0x01020304;
spi_tx_32[1] = 0x5aa55aa5;
spi_tx_32[2] = 0x01020304;
spi_tx_32[3] = 0x5aa55aa5;
/* Small delay */
busy_wait(1);
/* Read RX 32-bit tranfers */
if (spi_rx_32[0] != 0x01020304)
errors++;
if (spi_rx_32[1] != 0x5aa55aa5)
errors++;
if (spi_rx_32[2] != 0x01020304)
errors++;
if (spi_rx_32[3] != 0x5aa55aa5)
errors++;
/* Disable SPI Engine */
spi_mmap_tx_rx_engine_control_write(0 * SPI_TX_RX_ENGINE_ENABLE);
/* Result */
printf("errors: %d\n", errors);
}
/* Test SPI with various SPI modes */
void test_spi_modes(void) {
volatile unsigned int *spi_tx_32 = (unsigned int *)SPI_TX_BASE;
volatile unsigned int *spi_rx_32 = (unsigned int *)SPI_RX_BASE;
int errors = 0;
printf("Test SPI with various SPI modes: 0 and 3...\n");
/* Configure Slots */
spi_mmap_ctrl_slot_control0_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_0 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_MSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
4 * SPI_SLOT_DIVIDER
);
spi_mmap_ctrl_slot_control1_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_3 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_MSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
4 * SPI_SLOT_DIVIDER
);
/* Enable SPI Engine */
spi_mmap_tx_rx_engine_control_write(1 * SPI_TX_RX_ENGINE_ENABLE);
/* TX 32-bit transfers */
spi_tx_32[0] = 0x5aa55aa5;
spi_tx_32[1] = 0x5aa55aa5;
/* Small delay */
busy_wait(1);
/* Read RX 32-bit tranfers */
if (spi_rx_32[0] != 0x5aa55aa5)
errors++;
if (spi_rx_32[1] != 0x5aa55aa5)
errors++;
/* Disable SPI Engine */
spi_mmap_tx_rx_engine_control_write(0 * SPI_TX_RX_ENGINE_ENABLE);
/* Result */
printf("errors: %d\n", errors);
}
/* Test SPI with various bitorders */
void test_spi_bitorders(void) {
volatile unsigned int *spi_tx_32 = (unsigned int *)SPI_TX_BASE;
volatile unsigned int *spi_rx_32 = (unsigned int *)SPI_RX_BASE;
int errors = 0;
printf("Test SPI with various bitorders: MSB and LSB first...\n");
/* Configure Slots */
spi_mmap_ctrl_slot_control0_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_0 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_MSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
4 * SPI_SLOT_DIVIDER
);
spi_mmap_ctrl_slot_control1_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_0 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_LSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
4 * SPI_SLOT_DIVIDER
);
/* Enable SPI Engine */
spi_mmap_tx_rx_engine_control_write(1 * SPI_TX_RX_ENGINE_ENABLE);
/* TX 32-bit transfers */
spi_tx_32[0] = 0xff000000;
spi_tx_32[1] = 0xff000000;
/* Small delay */
busy_wait(1);
/* Read RX 32-bit tranfers */
if (spi_rx_32[0] != 0xff000000)
errors++;
if (spi_rx_32[1] != 0xff000000)
errors++;
/* Disable SPI Engine */
spi_mmap_tx_rx_engine_control_write(0 * SPI_TX_RX_ENGINE_ENABLE);
/* Result */
printf("errors: %d\n", errors);
}
/* Test SPI TX/RX levels */
void test_spi_tx_rx_levels(void) {
volatile unsigned int *spi_tx_32 = (unsigned int *)SPI_TX_BASE;
volatile unsigned int *spi_rx_32 = (unsigned int *)SPI_RX_BASE;
int i;
int errors = 0;
int pattern;
printf("Test SPI TX/RX levels...\n");
/* Configure Slots */
spi_mmap_ctrl_slot_control0_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_0 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_MSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
128 * SPI_SLOT_DIVIDER
);
/* Enable SPI Engine */
spi_mmap_tx_rx_engine_control_write(1 * SPI_TX_RX_ENGINE_ENABLE);
/* TX 32-bit transfers */
pattern = 0x00000001;
for (i=0; i<16; i++){
if ((spi_mmap_ctrl_tx_status_read() >> 16) != i)
errors++;
spi_tx_32[0] = pattern;
}
/* Small delay */
busy_wait(1);
/* Read RX 32-bit tranfers */
for (i=0; i<16; i++){
pattern = spi_rx_32[0];
if ((spi_mmap_ctrl_rx_status_read() >> 16) != (16-1-i))
errors++;
}
if ((spi_mmap_ctrl_tx_status_read() >> 16) != 0)
errors++;
if ((spi_mmap_ctrl_rx_status_read() >> 16) != 0)
errors++;
/* Disable SPI Engine */
spi_mmap_tx_rx_engine_control_write(0 * SPI_TX_RX_ENGINE_ENABLE);
/* Result */
printf("errors: %d\n", errors);
}
/* Test SPI TX/RX IRQs */
void test_spi_tx_rx_irqs(void) {
volatile unsigned int *spi_tx_32 = (unsigned int *)SPI_TX_BASE;
volatile unsigned int *spi_rx_32 = (unsigned int *)SPI_RX_BASE;
int errors = 0;
int data __attribute__((unused));
printf("Test SPI TX/RX IRQs...\n");
/* Configure Slots */
spi_mmap_ctrl_slot_control0_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_0 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_MSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
128 * SPI_SLOT_DIVIDER
);
/* Enable TX/RX EventManager */
spi_mmap_ev_enable_write(0);
spi_mmap_ev_pending_write(spi_mmap_ev_pending_read());
spi_mmap_ev_enable_write(SPI_SLOT_EV_TX | SPI_SLOT_EV_RX);
/* Enable SPI Engine */
spi_mmap_tx_rx_engine_control_write(1 * SPI_TX_RX_ENGINE_ENABLE);
/* TX 32-bit transfers */
spi_tx_32[0] = 0x00000001;
/* Small delay */
busy_wait(1);
/* Verify TX/RX events */
if (spi_mmap_ev_pending_read() != (SPI_SLOT_EV_TX | SPI_SLOT_EV_RX))
errors++;
/* Read RX 32-bit tranfers */
data = spi_rx_32[0];
/* Clear events */
spi_mmap_ev_pending_write(spi_mmap_ev_pending_read());
/* Verify TX/RX events */
if (spi_mmap_ev_pending_read() != 0)
errors++;
/* Disable SPI Engine */
spi_mmap_tx_rx_engine_control_write(0 * SPI_TX_RX_ENGINE_ENABLE);
/* Result */
printf("errors: %d\n", errors);
}
/* Test SPI Back-to-Back */
void test_spi_back_to_back(void) {
volatile unsigned int *spi_tx_32 = (unsigned int *)SPI_TX_BASE;
volatile unsigned int *spi_rx_32 = (unsigned int *)SPI_RX_BASE;
int errors = 0;
printf("Test SPI Back-to-Back...\n");
/* Configure Slots */
spi_mmap_ctrl_slot_control0_write(
1 * SPI_SLOT_ENABLE |
SPI_SLOT_MODE_0 * SPI_SLOT_MODE |
SPI_SLOT_LENGTH_32B * SPI_SLOT_LENGTH |
SPI_SLOT_BITORDER_MSB_FIRST * SPI_SLOT_BITORDER |
1 * SPI_SLOT_LOOPBACK |
8 * SPI_SLOT_DIVIDER
);
/* Enable SPI Engine */
spi_mmap_tx_rx_engine_control_write(1 * SPI_TX_RX_ENGINE_ENABLE);
/* TX 32-bit transfers */
spi_tx_32[0] = 0x00000001;
spi_tx_32[0] = 0x00000002;
/* Small delay */
busy_wait(1);
/* Read RX 32-bit tranfers */
if (spi_rx_32[0] != 0x00000001)
errors++;
if (spi_rx_32[0] != 0x00000002)
errors++;
/* Disable SPI Engine */
spi_mmap_tx_rx_engine_control_write(0 * SPI_TX_RX_ENGINE_ENABLE);
/* Result */
printf("errors: %d\n", errors);
}
2023-08-04 17:44:54 +02:00
036193d046
CHANGES: Update.
2023-08-04 16:08:00 +02:00
587981a6b8
interconnect/csr_bus: Improve description.
2023-08-01 17:11:13 +02:00
bfd4dcdefc
interconnect/ahb: Cleanup and document a bit.
2023-08-01 16:52:20 +02:00
87e2456274
CHANGES.md: Update.
2023-07-31 18:00:43 +02:00
cb06949604
soc/add_etherbone: Expose arp_entries parameter.
2023-07-31 17:59:38 +02:00
e257ff916f
soc/cores/interconnect: Rely on WaitTimer's new automatic cast to int.
2023-07-31 11:32:48 +02:00
bf79c9032a
gen/genlib/misc/WaitTimer: Cast t to int and minor cosmetic cleanup.
2023-07-31 11:27:47 +02:00
b8dc1b7757
Merge pull request #1738 from trabucayre/fix_toolchain
...
litex_setup: fix software build when liteeth or/and litesata is set (riscv toolchain issue)
2023-07-31 08:57:52 +02:00
1a74854e55
litex_setup: fix software build when liteeth or/and litesata is set (riscv toolchain issue)
2023-07-30 15:37:51 +02:00
b2e4b22145
soc/add_pcie: Add with_ptm parameter and update CHANGES.
2023-07-30 15:12:01 +02:00
enjoy-digital
Radek Pesina
Gwenhael Goavec-Merou
Icenowy Zheng
Dolu1990
Gwenhael Goavec-Merou
Alexey Morozov