eef1aa77ef
Mark abort() as __attribute__((noreturn)).
2015-07-26 12:43:22 +03:00
10f719a830
Add support for fprintf(stderr, ...).
2015-07-26 12:42:53 +03:00
f5cc6fb72d
Don't use clang for anything except or1k.
2015-07-26 10:00:58 +03:00
d03dabb460
common.mak: Pass -fexceptions to clang and clang++.
...
This results in generation of .eh_frame sections. These sections
can be discarded during final linking, or included if exception
handling is desired. For exception handling to work, all sources
must be built with -fexceptions.
2015-07-26 03:30:21 +03:00
69c2a705bf
common.mak: use clang/clang++ to compile C/C++ sources.
...
Note that -integrated-as is not active by default on OR1K,
so we're still shelling out to binutils to assemble.
It is not yet possible to build everything using -integrated-as.
2015-07-26 03:28:37 +03:00
0f47876d2e
common.mak: remove RANLIB.
...
`ranlib` is not necessary on any system we can possibly build for,
as it is superseded by `ar s` for the last ten years or so (at least).
Thus, change ar invocations to `ar crs`, also removing a `l` flag
that is ignored by binutils.
2015-07-26 03:20:23 +03:00
f500b906e6
common.mak: remove AS.
...
$(AS) was never used: $(assemble) invokes the C compiler instead.
In case of LLVM, this will allow us to consistently use the LLVM
internal assembler for both inline assembly in C and assembly
sources; so, avoid ever invoking binutils as explicitly.
2015-07-26 02:46:03 +03:00
8d1c555e36
misoclib/com/uart: remove irq condition parameters and use "non-full" for tx irq, "non-empty" for rx irq.
...
An optimal solution for both sync and async mode is not easy to implement, it would requires moving CDC out of UART module and handling in the PHY with AsyncFIFO or minimal depth.
For now use the solution that works for both cases. We'll try to optimize that if we have performance issues.
2015-07-25 00:25:09 +02:00
ce11b30140
misoclib: integrate mxcrg.py in mlabs_video target, remove others directory
...
we should also get rid of mxcrg.v (similar to what is done on papilio or pipstrello)
2015-07-24 23:16:45 +02:00
b75b93df43
misoclib/com/uart: replace revered Migen FIFO function with specific _get_uart_fifo function for our use case.
2015-07-24 14:05:54 +02:00
0a115f609e
litepcie/frontend/dma: group loop index and count in loop_status register (avoid 2 register reads)
2015-07-24 13:52:57 +02:00
5a535ef347
Revert "migen/actorlib/fifo: add FIFO wrapper function"
...
This reverts commit d0a19c4be8
2015-07-24 19:25:36 +08:00
d0a19c4be8
migen/actorlib/fifo: add FIFO wrapper function
...
Allow automatic instantiation of the correct fifo (SyncFIFO or AsyncFIFO) according to the clock domains passed in argument.
2015-07-24 13:02:54 +02:00
d73d75007e
misoclib/com/uart: cleanup and add irq condition parameters
...
- reintroduce RX/TX split (ease comprehension)
- use FIFO wrapper function from Migen.
- add tx_irq_condition and rx_irq_condition
2015-07-24 12:57:42 +02:00
1f1ff5a5e9
migen/fhdl/tools: fix rename_clock_domain when new == old
...
Clock domain renaming should support new == old to allow programmatically determined clock domain renaming.
2015-07-24 12:48:51 +02:00
b1ea3340f3
litepcie/frontend/dma: add loop counter (useful to detect missed interrupts)
2015-07-22 22:55:11 +02:00
493f424ebd
Merge branch 'master' of https://github.com/m-labs/migen
2015-07-22 21:46:23 +02:00
dfc207aacb
litepcie: use data instead of dat in dma_layout (allow use of migen.actorlib.packet modules on dma dataflow)
2015-07-22 21:44:53 +02:00
5713ae381a
actorlib/packet/Depacketizer: manage layouts without error signal
2015-07-22 21:43:21 +02:00
40740d3ddc
litepcie: use optional platform.misoc_path to add litepcie phy wrapper verilog files
...
We should eventually try to use python package_data or data_file for that.
2015-07-22 18:09:04 +02:00
84514cf8d5
uart: remove option to refill HW from uart_write
2015-07-19 23:41:38 +02:00
a501d7c52d
uart: support async phys
2015-07-19 23:37:00 +02:00
097248bce9
uart.c: rx overflow fix and tx simplification
...
* fixes the clearing of the rx ringbuffer on rx-overflow
* removes tx_level and tx_cts by restricting the ringbuffer
to at least one slot empty
* agnostic of the details of the tx irq: works for uarts that
generate tx interrupts on !tx-full or on tx-empty.
* only rx_produce and tx_consume need to be volatile
2015-07-19 23:37:00 +02:00
09b33346be
Removed drive strength constraints on VGA/Audio signals
2015-07-14 23:00:26 +02:00
6468fa3db4
xilinx: ensure we chdir() back after build
2015-07-14 12:53:43 -06:00
52bdc29528
mimasv2: style, consistency with other boards
2015-07-14 19:56:00 +02:00
e56d80c7a0
Adding support for Numato Lab Mimas V2 platform
2015-07-14 19:42:51 +02:00
ea8ffd8e80
platforms/kc705: style
2015-07-14 19:42:44 +02:00
35250f5b11
bios: add romboot
...
When firmware is small enough, it can be interesting to run code from an embedded blockram memory (faster and not impacted by memory controller activity).
It can also be a fallback option in case boot from flash failed.
To use this, define ROM_BOOT_ADDRESS and initialize the blockram with the firmware data.
2015-07-14 18:01:44 +02:00
6c13879fb6
make.py: use sys.path.insert(0...) to allow external designs to have specific targets derived from a base target
2015-07-13 17:25:50 +02:00
4dca66b23d
misoclib/video/dvisampler: add fifo_depth parameter
2015-07-13 11:03:33 +02:00
e6da1d16b2
wishbone2lasmi: fix "READ_DATA" state
2015-07-09 10:40:32 +02:00
8d6aa82082
mibuild/openocd.py: add support
...
Tested with pipistrello and kc705. Needs patches from
https://github.com/jordens/openocd/tree/bscan_spi waiting
to be merged in the openocd queue.
2015-07-07 21:01:31 -06:00
d244eba583
tools/flterm.py: fix kernel-adr support
2015-07-07 14:58:49 +02:00
0545d49294
liteeth/core: add with_icmp parameter
2015-07-06 21:31:20 +02:00
e011f9378f
use sets for leave_out
2015-07-05 22:49:23 +02:00
c100ef6406
liteeth/core/mac: adapt depth on AsyncFIFOs according to phy (reduce ressource usage with MII phy)
2015-07-05 22:45:53 +02:00
c1ca928ec2
liteeth: small logic optimizations on mac (eases timings on spartan6)
2015-07-05 12:31:52 +02:00
73ea404380
Merge branch 'master' of https://github.com/m-labs/migen
2015-07-05 10:53:32 +02:00
1d1f8510d3
Allow using non-milkymist cables with UrJTAG.
2015-07-05 10:53:09 +02:00
23541b5949
software/bios: call eth_mode only if we have an ethernet mac (we don't need to call it when we have a hardware UDP/IP stack)
2015-07-04 21:04:23 +02:00
10eb07526d
bios: show memtest command in help
2015-07-02 17:20:06 +02:00
0df9c16e69
mibuild: Adding error checking around xsvf generation
2015-07-02 16:51:03 +02:00
8daf5e32c1
Adding support for programming with FPGALink
...
Steps for getting it set up.
* Get libfpgalink dependencies
sudo apt-get install \
build-essential libreadline-dev libusb-1.0-0-dev python-yaml
* Build libfpgalink
wget -qO- http://tiny.cc/msbil | tar zxf -
cd makestuff; ./scripts/msget.sh makestuff/common
cd libs; ../scripts/msget.sh libfpgalink
cd libfpgalink; make deps
* Convert libfpgalink to python3
wget -O - http://www.swaton.ukfsn.org/bin/2to3.tar.gz | tar zxf -
cd examples/python
cp fpgalink2.py fpgalink3.py
../../2to3/2to3 fpgalink3.py | patch fpgalink3.py
* Set your path's correctly.
export LD_LIBRARY_PATH=$(pwd)/libfpgalink/lin.x64/rel:$LD_LIBRARY_PATH
export PYTHON_PATH=$(pwd)/libfpgalink/examples/python:$PYTHON_PATH
2015-07-02 16:44:39 +02:00
055f7d51fc
mibuild/xilinx: Adding programming with the Digilent Adept tools
2015-07-02 16:03:44 +02:00
7afa3d61d9
mibuild/xilinx: Xilinx's FPGAs do not necessary share the same primitives: add xilinx_s7_special_overrides and specific XilinxDDROutputS7 implementation
...
Fix DDROutput implementation on spartan6 (tested with LiteETH's GMII phy)
2015-07-02 09:42:12 +02:00
4509265c70
travis: use use-local for conda install
...
http://conda.pydata.org/docs/build_tutorials/pkgs.html
2015-06-30 00:42:56 +02:00
31a447154d
soc: support constants without value
2015-06-28 21:35:37 +02:00
445f0f5d40
Remove self.programmer references in Mercury, as mercury programmer is not implemented.
2015-06-28 18:06:50 +02:00
3ea7ef81a9
Add Mercury dev board to mibuild ( http://www.micro-nova.com/mercury/ )
2015-06-28 16:30:41 +02:00
whitequark
Florent Kermarrec
Sebastien Bourdeauducq
Robert Jordens
numato
Tim 'mithro' Ansell
Yann Sionneau
William D. Jones