68e9a02a55
litedram/common: add cl/cwl values for DDR4 data rates from 1333MT/s to 2666MT/s.
2020-09-29 19:46:39 +02:00
c2d1cf358b
phy/ecp5/s7/usddrphy: separate DQS/DM to improve readability.
2020-09-29 19:23:34 +02:00
5aaffb7c16
phy/s7ddrphy: remove dqs_i/dqs_i_delayed (no longer used).
2020-09-29 19:00:25 +02:00
e69dbd2d91
bench: add DDR3 Mode Register settings generator.
...
Useful to change timing/electrical settings dynamically and bringup/debug DDR3 on new hardware.
2020-09-24 17:51:22 +02:00
7ccb7d8f16
test/reference: update.
2020-09-24 15:03:35 +02:00
5257197475
bench: add DDR4 Mode Register settings generator.
...
Useful to change timing/electrical settings dynamically and bringup/debug DDR4 on new hardware.
2020-09-24 14:57:14 +02:00
db54e325c8
phy/usddrphy: reduce BitSlip cycles to 1 sys_clk.
...
Increasing it to 2 hasn't been useful.
2020-09-24 13:36:02 +02:00
06544c6547
bench: uniformize targets with 125MHz clock and Etherbone.
2020-09-24 13:03:07 +02:00
0279b770ee
phy/s7ddrphy: avoid cdly CSRs when no odelay capability.
2020-09-22 10:58:14 +02:00
6fc6174c38
bench/genesys2: expose uart parameter.
2020-09-17 08:22:17 +02:00
8525a27762
test/reference: update.
2020-09-15 20:00:55 +02:00
8d39ac6dd1
phy/s7ddrphy: remove interface_type parameter and ISERDESE2's MEMORY_MODE support.
...
Supporting MEMORY_MODE add complexity to the codebase and this mode is not used by anyone.
It has been experimented on NeTV2 to solves instability at low temperature but hasn't improved
the behaviour.
2020-09-15 19:55:58 +02:00
c3b4b0d338
phy/s7ddrphy: reduce BitSlip's cycles to 1 (seems to be enough for all cases).
2020-09-15 19:50:45 +02:00
26e45d1ce4
phys: add support for dynamic rd/rdcmd/wr/wrcmd phases.
2020-09-14 18:57:20 +02:00
6a5f2fdb09
bench/genesys2: add uart_name parameter.
...
Useful when Etherbone is just used to reload BIOS.
2020-09-14 18:43:33 +02:00
f5184b41b5
core/multiplexer/steerel_sel: add support for dynamic rd/rdcmd/wr/wrcmd phases.
...
This is useful for development and also simplifies code (without using more resources when constants are used).
2020-09-14 18:40:58 +02:00
020cff1970
bench/genesys2: add back Etherbone (faster for BIOS dev) and add --load-bios/set-sys_clk arguments.
2020-09-14 10:55:16 +02:00
6a75aa0ad7
bench/common: add s7_load_bios/s7_set_sys_clk functions.
2020-09-14 10:54:35 +02:00
7eeea34c4e
bench: use 115200bauds UART on all targets (fast enough and simplify switch betwen targets).
2020-09-14 10:05:55 +02:00
e56f74e08b
test/reference: update.
2020-09-07 19:37:03 +02:00
cf45ca48bc
s7ddrphy/usddrphy: add cmd_delay parameter and pass cmd_latency/cmd_delay to PhySettings/Software.
2020-09-07 18:50:01 +02:00
3bab6f2024
common/PHYPadsReducer: make Cat optional (disabled by default).
2020-09-04 11:10:48 +02:00
543a94dd33
bench/common: enable load_rom on kcu105 (with delay workaround).
2020-09-03 17:46:50 +02:00
41c8ac637d
common/PHYPadsReducer: add Cat around Array (helps for standalone core integration).
2020-09-02 09:40:14 +02:00
d5fa60240b
litedram/gen: update LiteDRAMECP5DDRPHYCRG (AsyncResetSynchronizer integrated in PLL).
2020-09-01 13:58:16 +02:00
7d9c1de0a4
modules: remove unnecessary memtypes.
2020-09-01 13:43:09 +02:00
7d0dac78c5
bench/kcu105: add a second pll to reduce frequency steps.
2020-08-28 19:03:44 +02:00
0412dbd01d
phy/usddrphy: add global rst CSR and set default cmd_latency to 1.
2020-08-28 18:49:33 +02:00
1fb78fa558
bench: cleanup, do more testing on 7-series.
2020-08-28 17:57:59 +02:00
f43cfad4e3
phy/s7ddrphy: add global rst CSR and set default cmd_latency to 1 on Kintex7/Ultrascale.
2020-08-28 17:56:48 +02:00
248c5de517
bench: switch to UARTBone to simplify (and to allow testing boards without ethernet capability) and improve test.
2020-08-28 03:47:49 +02:00
6f2462b731
bench: add kc705.
2020-08-27 19:05:17 +02:00
d3502e6a9b
bench: add common.py with common bench test code.
2020-08-27 19:05:05 +02:00
2e3e19e9d4
bench: simplify/improve, working on arty/genesys2.
2020-08-27 18:41:54 +02:00
5c69da5d6d
bench: add initial kcu105 bench target.
2020-08-24 21:56:11 +02:00
9995c0fefb
bench: switch integrated_rom to "rw" mode and reload it over Etherbone at startup.
...
This simplifies software development.
2020-08-24 18:40:54 +02:00
ac825e5112
add SPDX License identifier to header and specify file is part of LiteDRAM.
2020-08-23 15:52:08 +02:00
198bcbab67
test/reference: update.
2020-08-07 23:14:09 +02:00
e3b86fef70
getting started: update.
2020-08-07 23:06:24 +02:00
a0a886e856
litedram/init: export xdr ratio and databits.
2020-08-07 19:47:27 +02:00
94241d0583
bench: use new platform.request_all on LedChaser.
2020-08-06 20:03:03 +02:00
74205979bd
bench: add genesys2 bench.
2020-08-06 19:19:45 +02:00
37fb44f33e
add bench directory with a first bench on arty board.
...
The aim is to create an automated hardware bench, control is done over Etherbone
(but could also be done over UARTBone, PCIe, USB, etc...) and various frequencies
are tested and BIOS logged.
It would also be useful to be able to recompile/reload BIOS in this bench to easily
test software changes and verify it works with various frequencies.
Can be tested with:
./arty.py --build --load
lxserver --udp
./arty.py --test
Dump Main PLL...
ClkReg1:
low_time: 8
high_time: 8
reserved: 1
phase_mux: 0
Reconfig Main PLL to 133.33333333333331MHz...
Measuring sys_clk...
sys_clk: 133.72MHz
Reset SoC and get BIOS log...
__
__ _ __ _ __
/ / (_) /____ | |/_/
/ /__/ / __/ -_)> <
/____/_/\__/\__/_/|_|
Build your hardware, easily!
(c) Copyright 2012-2020 Enjoy-Digital
(c) Copyright 2007-2015 M-Labs
BIOS built on Aug 6 2020 18:49:15
BIOS CRC passed (44c8f057)
Migen git sha1: 7bc4eb1
LiteX git sha1: 188e6f57
--=============== SoC ==================--
CPU: VexRiscv @ 100MHz
BUS: WISHBONE 32-bit @ 4GiB
CSR: 32-bit data
ROM: 32KiB
SRAM: 8KiB
L2: 8KiB
MAIN-RAM: 262144KiB
--========== Initialization ============--
Initializing DRAM @0x40000000...
SDRAM now under software control
SDRAM now under software control
Read leveling:
m0, b00: |00000000000000000000000000000000| delays: -
m0, b01: |00000000000000000000000000000000| delays: -
m0, b02: |00000000000000000000000000000000| delays: -
m0, b03: |00000000000000000000000000000000| delays: -
m0, b04: |00000000000000000000000000000000| delays: -
m0, b05: |00000000000000000000000000000000| delays: -
m0, b06: |00000000000000000000000000000000| delays: -
m0, b07: |00000000000000000000000000000000| delays: -
m0, b08: |00000000000000000000000000000000| delays: -
m0, b09: |11111111111000000000000000000000| delays: 05+-05
m0, b10: |00000000000111111111110000000000| delays: 16+-05
m0, b11: |00000000000000000000000111111111| delays: 27+-04
m0, b12: |00000000000000000000000000000000| delays: -
m0, b13: |00000000000000000000000000000000| delays: -
m0, b14: |00000000000000000000000000000000| delays: -
m0, b15: |00000000000000000000000000000000| delays: -
best: m0, b09 delays: 05+-05
m1, b00: |00000000000000000000000000000000| delays: -
m1, b01: |00000000000000000000000000000000| delays: -
m1, b02: |00000000000000000000000000000000| delays: -
m1, b03: |00000000000000000000000000000000| delays: -
m1, b04: |00000000000000000000000000000000| delays: -
m1, b05: |00000000000000000000000000000000| delays: -
m1, b06: |00000000000000000000000000000000| delays: -
m1, b07: |00000000000000000000000000000000| delays: -
m1, b08: |00000000000000000000000000000000| delays: -
m1, b09: |11111111111000000000000000000000| delays: 05+-05
m1, b10: |00000000000011111111111000000000| delays: 17+-05
m1, b11: |00000000000000000000000011111111| delays: 28+-04
m1, b12: |00000000000000000000000000000000| delays: -
m1, b13: |00000000000000000000000000000000| delays: -
m1, b14: |00000000000000000000000000000000| delays: -
m1, b15: |00000000000000000000000000000000| delays: -
best: m1, b09 delays: 05+-05
SDRAM now under hardware control
Memtest at 0x40000000...
[########################################]
[########################################]
Memtest OK
Memspeed at 0x40000000...
Writes: 212 Mbps
Reads: 188 Mbps
--============== Boot ==================--
Booting from serial...
Press Q or ESC to abort boot completely.
sL5DdSMmkekro
Timeout
No boot medium found
--============= Console ================--
litex> Reconfig Main PLL to 114.28571428571428MHz...
2020-08-06 19:05:20 +02:00
4e62d28af6
examples/.yml: set cmd_latency to 1 on Kintex7/Ultrascale (values valided in LiteX-Boards).
2020-08-06 11:52:34 +02:00
07bf34d0e7
frontend/wishbone: revert non-FSM version, the FSM one does not seem to cover all cases.
2020-08-05 15:48:23 +02:00
9c5ce52b88
common: add connect method to LiteDRAMNativePort and use it in adapter for identify converter.
2020-08-05 12:17:25 +02:00
06f7192fb6
frontend/adapter/LiteDRAMNativePortConverter: simplify using ratio.
2020-08-05 11:41:54 +02:00
a3dfc1db25
frontend/adapter: minor cleanups.
2020-08-05 11:34:49 +02:00
deac4c8134
frontend/adapter: simplify LiteDRAMNativePortDownConverter.
2020-08-05 11:28:44 +02:00
ce4e7f9ad0
frontend/adapter: simplify LiteDRAMNativePortCDC using stream.ClockDomainCrossing.
2020-08-05 11:24:48 +02:00
Florent Kermarrec