c07f4a1f1b
gen: add l2_data_width to kwargs
2020-01-13 17:31:17 +01:00
b77af48d50
modules/H5TC4G63CFR: cleanup
2020-01-13 17:05:46 +01:00
7d8287b57a
Merge pull request #98 from Marrkson/master
...
ADD: KX2 DDR3 module
2020-01-13 17:04:08 +01:00
53887fcb8e
ADD: KX2 DDR3 module
2020-01-13 14:05:38 +01:00
6f35465c0b
frotend/wishbone: avoid NextValue(count, 0) duplication
2020-01-13 13:19:25 +01:00
721c84bad0
frontend/wishbone: add efficient wishbone downconvert, improve DRAM access efficiency from CPU on boards with small native data_width.
2020-01-13 12:58:15 +01:00
34e6c24d72
frontend/wishbone: add write data buffer to avoid stalling wishbone while waiting for wdata.ready
2020-01-10 14:27:05 +01:00
1d2bc922b8
frontend/fifo: get back to original simple design and add test
2020-01-07 15:40:09 +01:00
d1b603ae6c
CONTRIBUTORS: update
2020-01-07 09:46:54 +01:00
c858890213
CONTRIBUTORS: update
2020-01-07 09:45:36 +01:00
9523386e2c
Merge pull request #97 from pdp7/master
...
add 32MB SDRAM for hadbadge
2020-01-07 09:42:00 +01:00
5d8d75f6cd
add 32MB SDRAM for hadbadge
...
Add AS4C32M8SA-7TCN 32MB SDRAM used on cartridge PCB
by Jacob Creedon for the Hackaday Supercon ECP5 badge.
These changes were orginally made by Michael Welling:
https://github.com/mwelling/litedram
KiCad design files for the SDRAM cartridge:
https://github.com/jcreedon/dram-cart/
The SDRAM cartridge PCB is shared at:
https://oshpark.com/shared_projects/IQSl2lid
shared DigiKey cart of the parts:
https://www.digikey.com/short/p1ct1h
More information in this blog post:
https://blog.oshpark.com/2019/12/20/
Hackaday Supercon 2019 badge PCB design:
https://github.com/Spritetm/hadbadge2019_pcb
2020-01-06 11:39:10 +01:00
a234dae338
frontend/fifo: add initial FIFO (to create large FIFOs in DRAM)
2020-01-06 10:17:46 +01:00
8dae0c0c7f
setup.py: add pyyaml to install_requires
2019-12-03 15:44:44 +01:00
eddd6e4eaf
modules/init: add DDR4 fine refresh mode support: x1, x2 and x4 (x1=previous and default behavior)
2019-12-03 12:20:32 +01:00
6c9c45f313
core/controller: cleanup ControllerSettings
2019-12-03 12:16:50 +01:00
73d614ef27
frontend/wishbone: remove LiteDRAMWishbone2AXI (can be replaced with LiteX's Wishbone2AXILite)
2019-11-30 11:06:41 +01:00
aa1ce68896
global: improve presentation/readability
2019-11-30 10:53:11 +01:00
ac4b339a6f
test/reference: update init headers
2019-11-15 19:45:39 +01:00
3fa4397224
Merge pull request #95 from gsomlo/gls-dfii-nphases
...
init: improve legibility of generated/sdram_phy.h (cosmetic)
2019-11-15 19:42:27 +01:00
bdcecad76f
init: improve legibility of generated/sdram_phy.h (cosmetic)
...
Use DFII_NPHASES constant (defined earlier in the file) to size the
two 'sdram_dfii_pix_[wrdata|rddata]_addr' arrays, instead of a bare
number. Additionally, ensure the first array element is indented by
a tab, same as the ones following it.
2019-11-12 14:06:47 -05:00
08325dd04e
Merge pull request #94 from mithro/lpddr-fix
...
Fix broken LPDDR support.
2019-10-30 14:28:53 -07:00
746329cb43
Fix broken lpddr support.
...
Fixes #93 .
2019-10-30 13:51:05 -07:00
401554f94c
Merge pull request #92 from gsomlo/gls-assert-width
...
frontend/[axi,wishbone]: add data_width match assertion, add base_address to LiteDRAMWishbone2Native
2019-10-25 12:25:07 +02:00
7356d3b15d
frontend/wishbone: add base_address param. to LiteDRAMWishbone2Native
2019-10-24 11:31:56 -04:00
24203cfc7b
frontend/axi: add assertion on matching axi, native port data_width
2019-10-23 10:01:42 -04:00
d84e1b4ac5
frontend/axi: add assert on axi.address_width and base_address
2019-10-18 18:30:39 +02:00
1d037d2a64
frontend/axi: add base_address parameter to LiteDRAMAXI2Native
2019-10-17 12:16:15 +02:00
5d1a9847aa
core: add LiteDRAMCore (ControllerInjector from LiteX)
2019-09-29 14:42:41 +02:00
d647abd026
gen: fix with_wishbone
2019-09-23 15:54:53 +02:00
db97203877
gen: use SoCCore with_wishbone parameter, do more replace in yml files before passing config to LiteDRAMCore
2019-09-23 12:55:14 +02:00
adf481f1d5
gen: disable peripherals that are not used when cpu_type is None
2019-09-23 10:16:47 +02:00
233191939e
gen: change CSR config names, switch to csr_expose/csr_align
2019-09-23 09:12:40 +02:00
da408a3982
gen: fix default csr_port_align value
2019-09-23 09:05:54 +02:00
bac66aa08f
gen: In conjunction with the corresponding changes in litex itself, this will allow us to generate a more useful standalone litedram core.
...
The CSR alignment and base can be specified (which mostly affects
the generation of csr.h) andwe stop trying to copy the init code
that we haven't generated
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2019-09-23 08:58:16 +02:00
afbf709767
We had the address and data bus sizes mixed up
...
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2019-09-23 08:51:04 +02:00
d93dded624
frontend/wishbone: add data_width assertions
2019-09-18 21:12:23 +02:00
f586aada1c
phys: improve presentation (add separators, better indent)
2019-09-11 09:50:46 +02:00
783258c97f
phys: use dfi instead if self.dfi internally
2019-09-11 09:00:36 +02:00
59c1289432
phy/usddrphy: move DDR4DFIMux to dfi.py
2019-09-11 08:57:58 +02:00
f861d99903
core/refresher: improve naming/parameters of refresh postponing
2019-09-11 08:38:22 +02:00
dc1bb53a88
phys: move get_cl_cw/get_sys_latency/get_sys_phases helpers to common
2019-09-11 08:00:54 +02:00
509f60652a
README: add periodic refresh/ZQ short calibration.
2019-09-09 18:05:17 +02:00
40b4c62889
test/test_init: fix
2019-09-09 15:17:43 +02:00
5b48eb278a
test/test_init: delete generated file
2019-09-09 15:08:01 +02:00
188b6a8feb
add ZQ periodic short calibration support (default to 1s)
2019-09-09 15:07:38 +02:00
6e176d40ac
init: split by memtype
2019-09-09 12:10:48 +02:00
0b24b817e3
test: add test_init with sdr/ddr3/ddr4 references
2019-09-09 11:45:10 +02:00
bf5883cd43
rename sdram_init to init
2019-09-09 11:42:02 +02:00
23ccdc9c0c
modules: add DDR3 MT8KTF51264 SO-DIMM
2019-09-09 08:47:29 +02:00
Florent Kermarrec
Mark
Drew Fustini
Gabriel Somlo
Tim Ansell
Benjamin Herrenschmidt