c12e832bcb
init: fix python header generation
...
With the previous code lines included python variable names instead of integers, e.g.
("ZQ Calibration start", MPC.ZQC_START, SpecialCmd.MPC, dfii_command_we|dfii_command_cs, 200)
which failed as these names were not being imported.
2021-03-31 15:58:43 +02:00
996d0add26
Merge pull request #224 from antmicro/jboc/lpddr4
...
Add LPDDR4 PHY
2021-03-31 09:35:06 +02:00
f5e7c39776
Merge pull request #238 from antmicro/jboc/refresh-all-banks
...
core/refresher: use A10=1 for an all-banks REF
2021-03-31 08:50:25 +02:00
df2a06584b
Merge pull request #237 from antmicro/jboc/dfii-bankbits
...
core: use wider DFI address/bank if PHY requires it
2021-03-31 08:48:32 +02:00
04334ae141
phy/s7ddrphy/usddrphy: Use explicit sys clock domain on ClockSignal/ResetSignal.
...
Improve readability.
2021-03-30 08:51:44 +02:00
5cd192a708
bench: Remove soc_sdram import (No longer useful and deprecated).
2021-03-30 08:49:54 +02:00
06b30979dd
lpddr4/s7phy: add with_odelay parameter and Artix/Kintex/Virtex variants
2021-03-25 15:31:58 +01:00
e07198ac57
lpddr4/utils: simplify ConstBitSlip
2021-03-25 15:31:58 +01:00
e860d86f3f
lpddr4/phy: make redundant cmd overlaps checks optional (and disabled by default)
2021-03-25 15:31:58 +01:00
f282d809d1
lpddr4: remove old fixme comments
2021-03-25 15:31:58 +01:00
a64cb58753
core/refresher: use A10=1 for all banks REF
...
This is needed because newer DRAMs like LPDDR4 or DDR5 have
separate commands for per-bank refresh and all banks refresh.
Other DRAM types ignore address for REF commands.
2021-03-25 15:31:58 +01:00
a21b70e061
init: revert bitslips changed to 16 for phys other than S7LPDDR4PHY
2021-03-25 15:31:58 +01:00
f3a0a7d038
lpddr4/s7phy: remove OE delay CSRs, use fixed, tested values
2021-03-25 15:31:58 +01:00
ba57791c1d
lpddr4/s7phy: extend time of holding output enable on tristate lines
2021-03-25 15:31:58 +01:00
58235f478e
lpddr4/init: increase CA/DQ Vref to 30.4% (yields better results)
2021-03-25 15:31:58 +01:00
693695f067
lpddr4/init: initialize all More Registers (even if setting defaults)
2021-03-25 15:31:58 +01:00
0ecb1340f5
lpddr4/test: fixes: use 2tCK write preamble, update read latency
2021-03-25 15:31:05 +01:00
5c6796b92a
lpddr4: change MRW command encoding to avoid changing BIOS code
2021-03-25 15:30:48 +01:00
f1a40cef2f
core: use wider DFI address/bank if PHY requires it
2021-03-25 15:29:32 +01:00
eb1d900c24
lpddr4: S7PHY related fixes, MRR command, runtime configurable WRITE/MASKED-WRITE
2021-03-25 15:29:17 +01:00
052dc19246
lpddr4: improve documentation
2021-03-25 15:21:01 +01:00
1b65e858b3
lpddr4/utils: rework `once` helper function to be more generic
2021-03-25 15:21:01 +01:00
4473335954
lpddr4/commands: replace MPC dict with an enum with docstring
2021-03-25 15:19:16 +01:00
7f19e92c75
ci: add dependencies required for Verilator-based tests
2021-03-25 15:19:16 +01:00
4415a3eaf5
lpddr4: improve simulation and Verilator tests runner
2021-03-25 15:19:16 +01:00
4a5feb9e11
lpddr4/s7phy: improve to use the new DoubleRateLPDDR4PHY
2021-03-25 15:19:16 +01:00
2ab763ac5e
lpddr4: add double-rate PHY, clean up and improve PHY implementation
2021-03-25 15:19:16 +01:00
183f1643aa
lpddr4: add support for MASKED-WRITE
2021-03-25 15:19:16 +01:00
4b78fc99e8
lpddr4/sim: create LPDDR4 simulator and Verilator target
2021-03-25 15:19:16 +01:00
05ed238829
lpddr4: split implementation into multiple files in separate directory
2021-03-25 15:19:16 +01:00
ee9c2b4cf7
lpddr4: implement ZQC through MPC and include it in init sequence
...
We do not yet support ZQC during operation (after init sequence)
as LPDDR4 requires 2-stage ZQC (start+latch) and 1us in between,
which requires modifying Refresher (ZQCExecutor) in LiteDRAM.
2021-03-25 15:19:16 +01:00
055e2dc597
lpddr4: add initial PHY for Series7
2021-03-25 15:19:16 +01:00
4d9106847f
init: add LPDDR4 initialization
2021-03-25 15:19:16 +01:00
788b3f6d02
modules: modules: add LPDDR4 module
2021-03-25 15:19:16 +01:00
6943a1a4a5
lpddr4: initial PHY logic and simulation tests
2021-03-25 15:19:08 +01:00
f0de06091e
core/refresher: use A10=1 for all banks REF
...
This is needed because newer DRAMs like LPDDR4 or DDR5 have
separate commands for per-bank refresh and all banks refresh.
Other DRAM types ignore address for REF commands.
2021-03-24 10:31:06 +01:00
de12e62ac5
core: use wider DFI address/bank if PHY requires it
2021-03-23 12:41:31 +01:00
f17037fdb2
bench/common: Cleanup, Increase sys_clk measure time to 5s.
2021-03-12 14:29:43 +01:00
3f9759b83b
bench/xcu1525: Update build directories.
2021-03-12 10:59:06 +01:00
df5f555842
bench: Update with recent changes.
2021-03-12 10:25:11 +01:00
e3c2ab0757
phy/usddrphy: Add missing i_RST on DQS's ODELAYE3.
2021-03-04 14:44:07 +01:00
06411b2a72
frontend/dma: Modify CSR interface to be similar to LiteX's DMA (start becomes a enable), also add offset CSR to keep track of current status.
2021-03-04 11:58:33 +01:00
e9d5128811
frontend/dma: Add default CSR values to add_csr. (Allow initializing DMA after reset without software intervention).
2021-03-03 19:42:40 +01:00
25b64c3374
phy/usddrphy: Avoid separate ODELAYE3 by avoiding software reset on DQS's ODELAYE3.
...
The fabric is now maintaining an increment counter for each DQS's ODELAY and software
use it to revert total increments to 0 (equivalent to a reset).
Avoiding the separate ODELAYE3 simplifies design constraints since it was often placed
far from the DRAM pads and thus requiring a LOC constraint to avoid timing violations.
The software has to use the following sdram_write_leveling_rst_delay function:
static void sdram_write_leveling_rst_delay(int module) {
/* Select module */
ddrphy_dly_sel_write(1 << module);
/* Reset DQ delay */
ddrphy_wdly_dq_rst_write(1);
/* Reset DQS delay */
while (ddrphy_wdly_dqs_inc_count_read() != 0) {
ddrphy_wdly_dqs_inc_write(1);
cdelay(100);
}
/* Un-select module */
ddrphy_dly_sel_write(0);
}
2021-03-03 11:29:58 +01:00
541e2f1c57
litedram_gen: Avoid multi-lines on user_port.
2021-03-02 10:54:20 +01:00
d016edf68b
frontend/dma: Drive aw/ar.size when using AXI port.
2021-03-02 10:13:59 +01:00
424b5f956a
litedram_gen: review #234 : rename --module-name to --name add also adapt init file renaming.
2021-03-01 09:25:16 +01:00
aa3ed0bbff
Merge pull request #234 from craigjb/build_name
...
Add module name CLI option
2021-03-01 09:21:04 +01:00
a1c5a10fe2
Add module name CLI option
2021-02-21 13:00:53 -07:00
2d021c842e
test/reference: update.
2021-02-16 18:35:53 +01:00
Jędrzej Boczar
enjoy-digital
Craig Bishop