enjoy-digital
|
64627e3707
|
Merge pull request #135 from sensille/tx_write_only
Tx write only
|
2023-07-03 10:40:39 +02:00 |
Arne Jansen
|
53799444fd
|
Merge branch 'enjoy-digital:master' into tx_write_only
|
2023-06-28 18:50:48 +02:00 |
|
Florent Kermarrec
|
15054f6f8e
|
liteeth_gen/sgmii: Expose link_up status.
|
2023-06-28 11:09:19 +02:00 |
|
Florent Kermarrec
|
18cd5f234a
|
frontend/stream: Add 16-bit data-width support.
|
2023-06-28 11:02:37 +02:00 |
|
Arne Jansen
|
e83fd55fe8
|
add tx_write_only flag
This can save some resources in case reading the tx buffer is not needed.
It also makes it easier for synthesis to infer BRAM, tested on Spartan6.
|
2023-06-27 16:35:50 +02:00 |
|
Florent Kermarrec
|
65ef1930f5
|
liteeth_gen: Add refclk_freq parameter for SGMII/1000BaseX.
|
2023-06-23 12:51:15 +02:00 |
|
Florent Kermarrec
|
eab6b467f7
|
phy/usp_gtX_1000basex: Add 156.25MHz refclk_freq support in addition of 200MHz.
|
2023-06-23 12:43:35 +02:00 |
|
Florent Kermarrec
|
2dfd4398c9
|
phy/usp_gtX_1000basex: Use CPLLREFCLKSEL = 0b001 to let Vivado automatically select the right refclk.
|
2023-06-23 08:50:30 +02:00 |
|
Florent Kermarrec
|
2681a4f5d1
|
liteeth_gen: Finish adding Etherbone support.
|
2023-06-22 21:36:38 +02:00 |
|
Florent Kermarrec
|
52e94c02b5
|
liteeth_gen: Remove _eth suffix from PHY pads (not useful in case of a standalone core).
Will however require an update from design using the standalone core.
|
2023-06-22 17:31:01 +02:00 |
|
Florent Kermarrec
|
0d59ea180f
|
examples: Add udp usp gth sgmii example.
|
2023-06-22 16:50:24 +02:00 |
|
Florent Kermarrec
|
4650cb0a01
|
liteeth_gen: Add SGMII PHYs support (7-Series and Ultrascale+).
|
2023-06-22 16:49:15 +02:00 |
|
Florent Kermarrec
|
fc4003b115
|
liteth/phy: Update 1000basex imports and cleanup other imports.
|
2023-06-22 16:48:10 +02:00 |
|
Florent Kermarrec
|
9d22266233
|
frontend/stream: Update to LiteXModule and fix UDPTX packet send condition.
|
2023-06-14 11:17:37 +02:00 |
|
Florent Kermarrec
|
381ed30583
|
phy/k7_1000basex: Connect tx/rx_reset_done.
|
2023-06-13 19:18:29 +02:00 |
|
Florent Kermarrec
|
99d0fd92f3
|
phy/usp_gth_1000basex: Remove non-present/commented signals.
|
2023-06-13 19:13:40 +02:00 |
|
Florent Kermarrec
|
706f068822
|
phy/ku/usp_gth/gty_1000basex: Add rx/tx_polarity parameters for consistency with others 1000basex PHYs.
|
2023-06-13 19:12:04 +02:00 |
|
Florent Kermarrec
|
6c9dde1aca
|
phy/ku/usp_gth/gty_1000basex: Add with_csr parameter for consistency with other 1000basex PHYs.
|
2023-06-13 19:08:24 +02:00 |
|
Florent Kermarrec
|
3e026795d8
|
bench/xcu1525/xu8_st1: Directly add IOs in Etherbone section.
|
2023-06-13 18:36:15 +02:00 |
|
Florent Kermarrec
|
af5b9f433f
|
README: Add PHY support/family table.
|
2023-06-13 18:09:15 +02:00 |
|
Florent Kermarrec
|
9f69850697
|
usp_gth_1000basex: Working :), remove debug.
|
2023-06-13 17:44:12 +02:00 |
|
Florent Kermarrec
|
cfe3201854
|
phy/usp_gty_1000basex: Working :), remove debug.
|
2023-06-13 17:30:20 +02:00 |
|
Florent Kermarrec
|
bea94efae1
|
bench: Add Mercury XU8/ST1 bench to test/validate USP_GTH_1000BASEX.
|
2023-06-13 16:46:49 +02:00 |
|
Florent Kermarrec
|
d7aca70058
|
phy: Add initial usp_gth_1000basex (untested).
|
2023-06-13 16:41:26 +02:00 |
|
Florent Kermarrec
|
263eb1244f
|
phy: Rename usp_1000basex to usp_gty_1000basex and update xcu1525.
|
2023-06-13 16:33:22 +02:00 |
|
Florent Kermarrec
|
ee9d9e30e4
|
phy/1000basex: Move Gearbox to pcs_1000basex since common and rename it to PCSGearbox.
|
2023-06-13 16:27:14 +02:00 |
|
Florent Kermarrec
|
be9f26e876
|
phy/k7_1000basex: Improve TX/RX init and add TX/RX polarity support.
|
2023-06-13 15:23:38 +02:00 |
|
Florent Kermarrec
|
5400515a1e
|
phy/k7_1000basex: Replace specific TX/RX MMCM with S7MMCM.
|
2023-06-13 14:48:55 +02:00 |
|
Florent Kermarrec
|
9a67f4ea6b
|
phy/a7_1000basex: Cleanup BUFH presentation.
|
2023-06-13 14:48:02 +02:00 |
|
Florent Kermarrec
|
d63b340e34
|
bench: Add kc705 / K7_1000BASEX bench design.
|
2023-06-13 14:42:40 +02:00 |
|
Florent Kermarrec
|
fa08ce1ccc
|
bench: Update.
|
2023-06-13 14:13:03 +02:00 |
|
Florent Kermarrec
|
6d26f35ee4
|
phy/a7_1000basex: Make CSR optional (as done on k7_1000basex).
|
2023-06-13 13:56:18 +02:00 |
|
Florent Kermarrec
|
e8efca804b
|
phy/a7_1000basex: Replace specific TX/RX MMCM with S7MMCM.
|
2023-06-13 13:43:12 +02:00 |
|
Florent Kermarrec
|
5f2643ee83
|
phy/xgmii: Revert some changes since failing in CI.
|
2023-06-13 13:30:49 +02:00 |
|
Florent Kermarrec
|
5569cef1e2
|
phy/1000basex: Minor cleanups.
|
2023-06-13 10:42:40 +02:00 |
|
Florent Kermarrec
|
325f39b1cd
|
phy/pcs_1000basex: stb/ack -> valid/ready.
|
2023-06-13 10:16:43 +02:00 |
|
Florent Kermarrec
|
a9e41ef59b
|
phy/pcs_1000basex: Minor changes/cleanups.
- Switch to LiteXModule.
- Cosmetic cleanups for similarity with others modules.
- Use K/D definition from litex.soc.cores.code_8b10b.
|
2023-06-13 10:13:32 +02:00 |
|
Florent Kermarrec
|
7046987ff1
|
phy/pcs_1000basex: Update from misoc.
|
2023-06-13 09:52:20 +02:00 |
|
Florent Kermarrec
|
e9605ef9d8
|
phy/gmii/mii/rmii/xgmii: Switch to LiteXModule and minor simplifications/cleanups.
|
2023-06-13 09:35:17 +02:00 |
|
Florent Kermarrec
|
028838e744
|
phy/usp_1000basex: Update parameters from Xilinx PMA/PCS core.
|
2023-06-12 16:28:17 +02:00 |
|
Florent Kermarrec
|
150710d810
|
phy/usp_1000basex: Fix TX/RX_PROGDIV_CFG.
TX and RX clks now up.
|
2023-06-09 15:20:36 +02:00 |
|
Florent Kermarrec
|
8f7a1bf5d4
|
liteeth_gen: Disable wip Etherbone.
|
2023-06-09 08:32:42 +02:00 |
|
Florent Kermarrec
|
7f4df17615
|
liteeth_gen: Add initial (and wip) etherbone support.
|
2023-06-08 22:04:45 +02:00 |
|
Florent Kermarrec
|
f00d95c534
|
usp_1000basex: Update a few parameter and add debug probes to investigate on xcu1525.
|
2023-06-08 17:56:37 +02:00 |
|
Florent Kermarrec
|
a57178ac26
|
phy/rmii: Add with_refclk_ddr_ouptut parameter and minor cosmetic cleanups.
Setting with_refclk_ddr_ouptut to False can allow use of RMII PHY on platforms
not supporting DDROutput.
|
2023-05-24 19:18:53 +02:00 |
|
enjoy-digital
|
bbed8f1c95
|
Merge pull request #133 from jersey99/usp-rgmii
Make phy/usrgmii.py Ultrascale+ compatible
|
2023-05-18 08:38:29 +02:00 |
Vamsi Vytla
|
7040b19937
|
make phy/usrgmii.py Ultrascale+ compatible
|
2023-05-17 14:56:20 -07:00 |
|
Florent Kermarrec
|
d607d9f34b
|
setup.py: Prepare for 2023.04.
|
2023-05-07 20:48:15 +02:00 |
|
enjoy-digital
|
117fb37b24
|
Merge pull request #132 from timkpaine/tkp/ci
add manifest, uplift setup.py to pass twine checks
|
2023-04-15 22:17:39 +02:00 |
Tim Paine
|
d66457d2b0
|
add manifest, uplift setup.py to pass twine checks
|
2023-04-11 14:18:11 -04:00 |