3050716e8e
boards: digilent_nexys4ddr, kosagi_netv2, sipeed_tang_primer_20k: added eth_ip/remote_ip arg
2024-09-13 15:40:12 +02:00
4604379f46
platforms/sqrl_xcu1525: Revert previous commit, clk constraints were already present in DDR4 constraints.
2024-09-13 09:45:24 +02:00
90ff3d1ea9
platforms/sqrl_xcu1525.py: Add constraints on 300MHz clks.
2024-09-13 09:42:59 +02:00
1dbecf704d
efinix_ti375: Cosmetic cleanups on #610 .
2024-09-11 09:10:48 +02:00
d312ea331f
Merge pull request #610 from Dolu1990/ti375_c529
...
Add efinix Ti375 c529 dev kit support
2024-09-11 08:18:44 +02:00
d0c07933bf
litex_boards/targets/efinix_trion_t20_bga256_dev_kit.py: removed create_clkout name param, updated ClkOutput special
2024-09-10 16:37:12 +02:00
59d32e4283
targets/efinix_trion_t120_bga576_dev_kit.py: fix clock name to match sys_clk real name
2024-09-10 08:06:43 +02:00
d209f64a45
Add efinix_ti375_c529_dev_kit support
2024-09-05 15:30:55 +02:00
b893374cdf
Fix ti60 dev kit spi-sdcard voltage
2024-09-05 15:28:07 +02:00
c8603bebe4
targets/hyperram: Switch Hyperram memory mode to rwx (required with VexiiRiscv).
2024-09-04 22:06:40 +02:00
185f8d5da4
Merge pull request #603 from pepijndevos/apicula
...
make Gowin boards work with Apicula
2024-09-04 10:40:10 +02:00
8f59ebeffb
WIP: make boards Gowin boards work with Apicula
2024-09-04 08:33:06 +02:00
738a5a8931
targets/efinix_trion_t120_bga576_dev_kit.py: added argument to select between RMII PMOD (default) or onboard RGMII Phy
2024-09-03 19:16:39 +02:00
7f26f3940f
efinix_trion_t120_bga576_dev_kit.py: fixed/rewire rx_ctl/tx_ctl (not compatible with DDIO mode), added message at build time
2024-09-03 16:01:51 +02:00
0313424fa0
targets/efinix_trion_t120_bga576_dev_kit.py: added argument to configure remote-ip. Pass local_ip and remote_ip to add_etherxxx
2024-09-03 12:42:49 +02:00
5a1e4bedfd
targets/efinix_titanium_ti60_f225_dev_kit.py: disable software_debug by default
2024-09-03 12:41:05 +02:00
0787517338
targets/efinix_titanium_ti60_f225_dev_kit.py: added argument to configure remote-ip. Pass local_ip and remote_ip to add_etherxxx
2024-09-03 12:40:35 +02:00
21e42e5bf6
wip
2024-08-30 20:35:38 +02:00
e7d00a8c43
ti60_f225_dev_kit: Update to new HyperRAM core with 2:1 ratio.
...
Tested at up to 250MHz sys_clk -> 125MHz HyperRAM Clk.
2024-08-29 12:35:39 +02:00
fd4f9ac186
targets: Use KILOBYTE/MEGABYTE constants when possible.
2024-08-29 12:18:19 +02:00
664525471f
Got HDMI to work on hardware
2024-08-28 20:19:33 +02:00
5bfde29ce4
platforms/lattice_certuspro_nx_evn.py: fix led pinout
2024-08-28 17:02:05 +02:00
c5d1a252c5
targets: Fix build with --cpu-type=None on iCE40/Up5kSPRAM.
2024-08-28 15:53:53 +02:00
30e26cacac
Add sdcard and usb ohci support
2024-08-27 08:31:53 +02:00
abaa9c404c
Fix the reset
2024-08-26 18:27:55 +02:00
144462e862
add jtag
2024-08-26 18:08:09 +02:00
d2cc8ad815
Got LPDDR4 to work
2024-08-26 16:54:53 +02:00
e604745c7d
wip
2024-08-26 13:05:57 +02:00
0f8b8defb4
efinix ti375 c529 dev kit bios OK
2024-08-26 11:29:27 +02:00
4002b8167c
Merge pull request #602 from trabucayre/fix_tangPrimer20k_iostandard
...
platforms/sipeed_tang_primer_20k.py: fix IOStandard values
2024-08-19 17:14:25 +02:00
52fc033bf5
Merge pull request #599 from trabucayre/sipeed_tang_gw5A_SDRAM
...
Sipeed tang gw5 a sdram
2024-08-19 17:12:48 +02:00
a5ee3c807a
platforms/sipeed_tang_primer_20k.py: fix IOStandard values
2024-08-14 09:16:39 +02:00
b1a6da84b3
sipeed_tang_primer_25k: add SDRAM support (j3 connector), allows user to select between mister and sipeed SDRAM module
2024-08-04 12:14:56 +02:00
2fa838b79d
sipeed_tang_mega_138k_pro: added SDRAM sipeed variant, allows user to select between mister and sipeed SDRAM module, fix sipeed SDRAM memory module
2024-08-04 12:13:47 +02:00
241dfb6780
fix pinnumber on connector C
2024-08-01 19:14:49 +02:00
81209b9fd1
platforms/enclustra_mercury_xu8_pe3: Revert to VivadoProgrammer since OpenFPGALoader is not albe to load bitstream correctly if FPGA is not already configured.
2024-07-22 15:28:25 +02:00
938bf8b3a6
targets/lattice_certuspro_nx_xx,targets/lattice_crosslink_nx_xxx: pass platform to NXOSCA CTOR
2024-07-22 15:18:27 +02:00
ab732011b3
plaforms/lattice_certuspro_nx_xx: SPI_MASTER_PORT disabled (required to have access to the flash), added default clk period constraints
2024-07-22 14:49:03 +02:00
5d4ebeb09c
targets: Add initial Enclustra Mercury+ XU8/PE3 target with DRAM and PCIe.
2024-07-22 11:40:19 +02:00
0394b626fa
platforms/enclustrat_mercury_xu8_pe3: Switch to OpenFPGALoader for loading FPGA.
2024-07-22 11:39:17 +02:00
8f8e0bd228
targets/enclustra: Add Enclustra to identifier.
2024-07-22 11:38:22 +02:00
f844d06da2
targets/litex_acorn_baseboard_mini: Add detect_ftdi_chip method since newer batch of baseboard is mounted with FTDI ft4232 chips.
...
FT2232 and FT4232 chips are footprint compatible but still need to be handled differently from software.
2024-07-19 15:43:25 +02:00
6d3c87a6f7
platforms/lattice_certuspro_nx_versa: Fix default_clk.
2024-07-17 15:14:53 +02:00
fff2e6bd3f
platform: Add Lattice CertusPro-NX Versa initial support.
2024-07-17 14:53:12 +02:00
88ab3eca6f
targets: Map SPRAM to SRAM when use as SRAM.
2024-07-17 11:01:34 +02:00
524387b45d
sqrl_xcu1525: Fix typo.
2024-07-11 12:54:38 +02:00
e94e84eb16
sqrl_xcu1525: Add more QSFP IOs.
2024-07-10 18:20:01 +02:00
c7b436a202
sqrl_xcu1525: Add QSFP-0/1 ref clks and rearrange a bit naming.
2024-07-10 17:04:48 +02:00
00df115e86
sqrl_xcu1525: Add QSFP-0/1 IOs.
2024-07-10 16:44:12 +02:00
5870b078f8
platforms/xilinx_vcu118: add fmc and pmod connector pinouts
...
VCU118 board has one FMC HPC, one FMC+ HSPC and two PMOD connectors,
Vivado board files does not contain pinouts for these, so pinouts are
taken from VCU118 Evaluation Board User Guide (UG1224).
Signed-off-by: Yichuan Gao <gaoyichuan000@gmail.com>
2024-07-06 00:16:53 +08:00
Gwenhael Goavec-Merou
Florent Kermarrec
Dolu1990
Pepijn de Vos
Gwenhael Goavec-Merou
Malte
Yichuan Gao