8e5f955e4e
targets/orangecrab: Fix --sdram-device help text
...
Obviously --sdram-device takes the SDRAM device, not the ECP5 FPGA
device.
Fixes: bf3c9dc9bf
2020-12-04 14:34:01 +01:00
5a4e28d47d
target/usb_acm: switch git clone to litex-hub/valentyusb repo (up to date with LiteX).
2020-11-27 18:53:45 +01:00
d42af3ea19
targets: add --sys-clk-freq support to all targets.
2020-11-12 18:07:28 +01:00
bd4e92ad13
targets: cleanup, uniformize build arguments between targets.
2020-11-12 11:46:00 +01:00
2b17dc1b89
target: add rst signal to CRG to allow full reset of the SoC on reboot command.
2020-11-04 11:13:42 +01:00
9b6ed6bdf1
targets/orangecrab: add fallback to bootloader when usr_btn is pressed for 1 second.
2020-09-01 16:22:32 +02:00
b9ac72cf78
targets: simplify clocking on iCE40/ECP5 targets (AsyncResetSynchronizer now integrated in PLL).
2020-09-01 13:38:32 +02:00
beccecf59f
orangecrab: reduce DDR3 power consumption/heat and get back USB PLL to CRGSDRAM.
...
- disable DQ termination.
- disable RTT_NOM.
- drive VCCIO/GND pads.
Reduce current from 0.25A to 0.12A with: ./orangecrab.py --uart-name=usb_acm --sys-clk-freq=48e6.
Still working at 96MHz, 0.17A with: ./orangecrab.py --uart-name=usb_acm --sys-clk-freq=96e6.
See https://github.com/enjoy-digital/litedram/issues/216 .
2020-08-28 20:01:54 +02:00
1781be166a
general: add SPDX License identifier to header and specify files are part of LiteX-Boards.
2020-08-23 15:00:17 +02:00
b6a1ad5a9c
targets/orangecrab: add simple CRG when built without DDR3.
2020-08-07 18:10:03 +02:00
869ceadacb
targets: use platform.request_all on LedChaser.
2020-08-06 20:04:03 +02:00
d9595a317e
targets/orangecrab: use user_btn as rst_n.
2020-07-06 17:49:05 +02:00
7a48a61605
targets: add indentifier on all targets.
2020-06-30 18:11:04 +02:00
1356ebb416
targets/ecp5: update clocking on boards with DDR3 to use reset from ddrphy.init and use primary clock for Power on reset.
2020-06-29 16:42:53 +02:00
64372d7876
targets/orangecrab: add spi-sdcard and workaround for ValentyUSB.
2020-06-11 19:21:44 +02:00
c94cbae0c0
orangecrab: add user_led (RGB leds), DFUProg and --load support.
2020-06-11 19:21:40 +02:00
94861bbb9a
targets/orangecrab: uncomment MT41K512M16.
2020-06-10 19:30:07 +02:00
06edf48897
targets: rename gateware-toolchain parameter to toolchain.
2020-06-02 13:45:05 +02:00
6335717eca
targets/orangecrab.py: propagate command arguments
...
The parsed args are stripped off by soc_core_argdict() (called from
soc_sdram_argdict() so we have to pass them explicitly (or pass the
original "args", but this mimics the rest of the code in the repo).
This fixes #72
2020-05-06 18:24:11 -07:00
2d9543b65e
targets: add build/load parameters on all targets.
2020-05-05 15:11:47 +02:00
84468c2a63
targets/CRG: platforms are now automatically constraining the input clocks.
2020-05-05 11:51:57 +02:00
78b5727774
targets: rename usb_cdc to usb_acm.
...
As discussed recently on Discord.
2020-04-30 21:48:10 +02:00
4185a019f5
targets: manual define of the SDRAM PHY is no longer needed.
2020-04-16 11:25:59 +02:00
3b91e96c42
targets/add_constant: avoid specifying value when value is None (=default)
2020-03-26 09:47:22 +01:00
4053c02d7e
targets/orangecrab: add USB PLL for USB CDC with ValentyUSB.
2020-03-25 19:38:36 +01:00
eb35ec92ba
orangecrab: combine revisions in target
2020-03-23 09:20:01 +10:30
159360da2c
orangecrab: Add r0.2 support
2020-03-22 21:04:07 +10:30
bf3c9dc9bf
orangecrab: Add sdram selection option
2020-03-22 20:41:12 +10:30
88d3f1d63e
orangecrab: r0.1 OrangeCrab fixes
2020-03-22 20:14:29 +10:30
83e6fb29f8
targets: switch to SoCCore/add_sdram instead of SoCSDRAM.
2020-03-21 12:43:39 +01:00
6f517ad1d6
targets/ecp5: make sure all BaseSoC/EthernetSoc default to trellis.
2020-03-05 10:57:59 +01:00
be5ed35871
targets: default to trellis toolchain on all ECP5 targets (now able to build all supported targets).
2020-02-28 09:46:54 +01:00
8211aca2e8
Avoid Official/Partner/Community differentiation: use same directory for all platforms/targets.
...
We initially wanted to provide different level of support for the platforms/targets, mainly
to avoid too much maintenance and let each contributor update its contributed platforms and
targets, but it's easier to update all platforms/targets all-together when LiteX evolves or
changes (and that's what has been done on litex-boards since the creation of the repository).
So let just simplify things and avoid this differentiation.
2020-02-03 09:36:30 +01:00
Geert Uytterhoeven
Florent Kermarrec
Tommy Thorn
Greg Davill