Hardware/litex-boards
1
0
Fork 0
mirror of https://github.com/litex-hub/litex-boards.git synced 2025-01-03 03:43:36 -05:00
Code Issues Projects Releases Packages Wiki Activity
726 commits 9 branches 14 tags 12 MiB
Commit graph

264 commits

Author SHA1 Message Date
Gwenhael Goavec-Merou
8d1095224f add support for redpitaya14/16 2020-11-26 06:54:11 +01:00
David Shah
11fa5c34ac nexus: Allow selection of toolchain 
Signed-off-by: David Shah <dave@ds0.me>
 2020-11-25 09:45:25 +00:00
Nathaniel R. Lewis
389b623fe2 targets/litefury: new target 
LiteFury is an Artix-7 development board in the M.2 form factor
for PCIe accelerator development. It's similar to the Aller but
with an xc7a100t rather than an xc7a200t and no TPM module.

https://rhsresearch.com/collections/rhs-public/products/litefury
 2020-11-19 21:52:14 -08:00
Florent Kermarrec
27f60b2e93 add initial Siglent SDS1104X-E support (Ethernet & DDR3 validated). 
Pinout from https://github.com/360nosc0pe project.
 2020-11-13 12:20:15 +01:00
Florent Kermarrec
843e724e3d targets/pcie: simplify using new LiteX's add_pcie method and enable it on all devices supported by LitePCIe. 2020-11-12 16:39:42 +01:00
Florent Kermarrec
9f11bfb0d1 qmtech_ep4ce15: convert name to lowercase, minor cleanup and add to test_targets. 2020-11-12 14:33:45 +01:00
enjoy-digital
31eb74dc2d
Merge pull request #122 from baselsayeh/master 
add Qmtech EP4CE15 coreboard support
 2020-11-12 14:27:49 +01:00
Florent Kermarrec
46e8a957fe platforms/zybo_z7: fix default_clk typo. 2020-11-12 14:26:36 +01:00
Florent Kermarrec
ac075f18c7 platforms/crosslink_nx_evn/vip: add default_clk. 2020-11-12 14:26:17 +01:00
Basel Sayeh
0fc67ddfdb
update copyright 2020-11-12 15:25:39 +02:00
Florent Kermarrec
a4d05522d4 platforms/ice40/ecp5: add toolchain parameter with default to trellis (ECP5) or icestorm (iCE40). 
Required to simplify simple.py target and use trellis/icestorm as default toolchain.
 2020-11-12 13:33:30 +01:00
Basel Sayeh
1b1ed5ebf1
add Qmtech EP4CE15 coreboard support 2020-11-12 01:56:36 +02:00
davidcorrigan714
97b64d16a6 Lattice NX PLL Support 2020-11-08 20:34:46 -06:00
Florent Kermarrec
1f52fbaca6 xcu1525: fix last ddram channel numbering. 2020-11-06 10:48:26 +01:00
Florent Kermarrec
2da4eabffe platforms/icebreaker: fix refactoring typo. 2020-11-04 09:30:01 +01:00
Florent Kermarrec
c093d0d0fc platforms: cleanup pass to uniformize comments/separators/orders. 2020-11-03 10:48:57 +01:00
Kevin Mehall
d1c9cc7553 Add LFE5U-12F device for ULX3S 2020-11-01 23:45:32 +00:00
Florent Kermarrec
d626861e95 platforms/acorn_cle_215: add serial_io (on P2). 2020-10-29 12:10:12 +01:00
enjoy-digital
51934567fe
Merge pull request #118 from daveshah1/lifcl-vip 
Add CrossLink-NX VIP board platform and target
 2020-10-22 11:03:47 +02:00
Florent Kermarrec
a38c1e7062 mist: add copyrights. 2020-10-22 10:48:58 +02:00
David Shah
20720693c4 crosslink_nx_vip: Add HyperRAM support 
Signed-off-by: David Shah <dave@ds0.me>
 2020-10-22 09:15:40 +01:00
David Shah
b278d8bccc Add CrossLink-NX VIP board platform and target 2020-10-22 09:15:35 +01:00
YanekJ
4541c39e94 Initial support for the MIST board (https://github.com/mist-devel/mist-board/wiki) 2020-10-17 12:28:22 +02:00
Florent Kermarrec
982cfd5ad5 platforms/xcu1525: fix ddram constraints, add clk300 constraints for all channels. 2020-10-13 11:50:36 +02:00
Florent Kermarrec
ddf7038c78 ulx3s: add 1.7 and 2.0 revisions support. 2020-10-12 13:23:26 +02:00
Bryan Jacobs
3b11e60fb1 Update ULX3S SD pins for revision 2.0 2020-10-11 14:17:48 +11:00
Florent Kermarrec
55da8b867a platforms/zedboard: minor cleanups to uniformize with other platforms. 2020-10-07 11:25:20 +02:00
Michael Betz
e225cbd28f add zedboard platform to CI 2020-10-06 11:35:03 -07:00
Michael Betz
8ee20a3f30 clean up imports 2020-10-06 11:24:34 -07:00
Michael Betz
865c2bd98c zedboard platform: clean up 
* remove unused code
  * remove oled integration code
  * openocd = default programmer
 2020-10-06 11:00:36 -07:00
Michael Betz
12aed44577 add zedboard platform 2020-10-06 00:28:54 -07:00
enjoy-digital
79ef091a06
Merge pull request #110 from pepijndevos/gowin 
Add initial support for Trenz TEC0117 board
 2020-10-05 19:50:09 +02:00
enjoy-digital
2ee32f2a15
Merge pull request #109 from geertu/orangecrab-Fix-r0.1-user_led-mapping 
orangecrab: Fix r0.1 user_led mapping
 2020-10-02 09:40:41 +02:00
enjoy-digital
062fbd6c63
Merge pull request #108 from daveshah1/dave/nx-evn-doc 
crosslink_nx_evn: Improve documentation on UART jumpers
 2020-10-02 09:40:04 +02:00
Pepijn de Vos
81e4f1f158 add initial support for Trenz TEC0117 board 2020-09-30 14:01:36 +02:00
Geert Uytterhoeven
b2e34f5faf orangecrab: Fix r0.1 user_led mapping 
On r0.1, all three user_leds are mapped to the same pin.
Fix this by mapping them to the pins connected to the individual
channels of the RGB LED, to match the comments, the schematics, and the
spirit of r0.2.

Untested on real hardware (I have r0.2 only).

Fixes: c94cbae0c0 ("orangecrab: add user_led (RGB leds), DFUProg and --load support.")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
 2020-09-25 10:33:21 +02:00
Florent Kermarrec
c6610b4a3f platforms/xcu1525: update ddram1/2/3 pinout. 
Using https://github.com/d953i/Custom_Part_Data_Files/blob/master/Boards/Xilinx_BCU1525/BCU1525_DIMMx.xdc
 2020-09-20 21:07:00 +02:00
Florent Kermarrec
e5a144e9cd platforms/xcu1525: update ddram0 pinout. 
Using https://github.com/d953i/Custom_Part_Data_Files/blob/master/Boards/Xilinx_BCU1525/BCU1525_DIMM0.xdc.
 2020-09-19 23:28:34 +02:00
Florent Kermarrec
8ffb86c0dc platforms/fk33/xcu1525: define pcie_x2/x4/x8/x16. 2020-09-19 22:37:05 +02:00
David Shah
8a9fd02768 crosslink_nx_evn: Improve documentation on UART jumpers 
Signed-off-by: David Shah <dave@ds0.me>
 2020-09-05 09:58:28 +01:00
Florent Kermarrec
76ac4a69a8 rename forest_kitten_33 platform/target to fk33. 2020-09-04 20:05:18 +02:00
Florent Kermarrec
979fee7517 forest_kitten_33: add pcie. 2020-09-04 20:02:43 +02:00
Florent Kermarrec
ad48728160 xcu1525: update headers (were still using old format). 2020-09-04 19:59:09 +02:00
enjoy-digital
ad4c483c32
Merge pull request #106 from daveshah1/dave/alveo_u250_pcie 
alveo_u250: Add PCIe x4 support
 2020-09-04 19:22:48 +02:00
enjoy-digital
a68c00e48e
Merge pull request #104 from DerFetzer/colorlight_5a_75e_v6_0 
Add support for 5A-75E V6.0 board
 2020-09-04 19:21:02 +02:00
David Shah
ae6a052e57 alveo_u250: Add PCIe x4 support 
Based on the implementation in xcu1525

Signed-off-by: David Shah <dave@ds0.me>
 2020-09-04 14:20:04 +01:00
Florent Kermarrec
2eda9d0252 xcu1525: add DDR4 IOs for C1/C2/C3 and fix compilation (untested). 2020-09-04 11:34:33 +02:00
Florent Kermarrec
7b6b71d4e3 xcu1525: add initial DDR4 support in C0 (untested). 2020-09-03 19:48:23 +02:00
Florent Kermarrec
51e881d1ff add minimal xcu1525 support (VCU1525 or BCU1525 boards). 2020-09-03 19:06:43 +02:00
DerFetzer
cc78574297 targets/colorlight_5a_75x: fix rx_data pin order for Ethernet PHY 0 2020-09-02 22:04:23 +02:00
DerFetzer
8b1fee0e66 Add support for 5A-75E V6.0 board 2020-09-01 17:02:17 +02:00
Florent Kermarrec
beccecf59f orangecrab: reduce DDR3 power consumption/heat and get back USB PLL to CRGSDRAM. 
- disable DQ termination.
- disable RTT_NOM.
- drive VCCIO/GND pads.

Reduce current from 0.25A to 0.12A with: ./orangecrab.py --uart-name=usb_acm --sys-clk-freq=48e6.
Still working at 96MHz, 0.17A with: ./orangecrab.py --uart-name=usb_acm --sys-clk-freq=96e6.

See https://github.com/enjoy-digital/litedram/issues/216.
 2020-08-28 20:01:54 +02:00
Florent Kermarrec
63b65e278c crosslink_nx_evn: update copyrights. 2020-08-24 22:33:58 +02:00
Piense
795e34aafd add initial Crosslink-NX support. 2020-08-24 16:47:38 +02:00
Florent Kermarrec
70594a5305 ulx3s: simplify sdram constraints and increase phase to 180 for sdram_rate=1:2. 2020-08-24 09:05:58 +02:00
Florent Kermarrec
1781be166a general: add SPDX License identifier to header and specify files are part of LiteX-Boards. 2020-08-23 15:00:17 +02:00
Florent Kermarrec
83d8b8d1b4 platforms/acorn_cle_215: integrated sdcard ios as extension. 2020-08-22 22:11:51 +02:00
connorwk
f328909578 Moved platform call inside of BaseSoC init for compatibility with linux-on-litex-vexriscv support. Added optional spi-sdcard support over P2 header. 2020-08-09 16:27:41 -04:00
Pawel Sagan
d2cd6d4c0e arty: Change USB-uart and I2S Pmod configuration 
This makes it compatible with the Arty A7 expansion board by Antmicro
(https://github.com/antmicro/arty-expansion-board).
 2020-08-05 11:54:25 +02:00
Pepijn de Vos
eba70377b7 add optional OLED peripheral to ULX3S target 2020-08-04 11:07:30 +02:00
Florent Kermarrec
929e55d7e6 platforms/trellisboard: add SDCard PMOD pins. 2020-07-29 09:07:55 +02:00
Florent Kermarrec
5fd3e8dbcd ecpix5: add SDCard. 
Validated with Linux-on-LiteX-VexRiscv.
 2020-07-28 17:45:49 +02:00
Florent Kermarrec
760b8ff93a arty: improve xy_pmod_io genericity (allow selecting the PMOD) and enable SDCard. 2020-07-24 16:29:35 +02:00
Florent Kermarrec
9730c6f722 platforms/de10nano: use additional sdram constraints required for HalfRate. 2020-07-24 12:27:36 +02:00
Florent Kermarrec
7399d13cef paltforms/de10nano/sdram: enable fast input/output on dq. 2020-07-24 11:27:25 +02:00
Florent Kermarrec
b4b1ab8621 paltforms/de10nano: simplify IO constraints (for consistency with others platforms). 2020-07-24 09:03:35 +02:00
enjoy-digital
89c5bf43cf
Merge pull request #92 from rob-ng15/master 
Enable use of HalfRateGENSDRPHY on de10nano
 2020-07-24 08:49:09 +02:00
Florent Kermarrec
1e1589a514 zybo_z7: demonstrate use of PS7 (with --cpu-type=zynq7000). 
This uses a pre-generated .xci hosted on github, still need to figure out where the best location for it.
 2020-07-23 17:45:21 +02:00
rob-ng15
cf9839307f
Add Misc 
Add Misc("") arguments to various inputs/outputs for stability. Allows de10nano to use HalfRateGENSDRPHY for sdram
 2020-07-23 14:40:04 +01:00
Florent Kermarrec
8a3b453e2f add Zybo Z7 minimal platform/targets: no PS7 support and USB-UART PMOD on JB. 2020-07-23 15:26:22 +02:00
Florent Kermarrec
e723bef49a platforms/arty: add usb_uart_pmod_io (USB-UART PMOD on JA) to ease debug with a second UART (for UARTbone/LiteScope). 
Also use pmod connector names in i2s_pmod and sdcard_pmod.
 2020-07-22 14:41:09 +02:00
Florent Kermarrec
19d0b95867 platforms/targets: keep in sync with litex. 2020-07-22 08:53:49 +02:00
Florent Kermarrec
0ee4b215b9 trellisboard/ulx3s: fix sdcard slewrate. 2020-07-21 15:23:08 +02:00
Florent Kermarrec
7efa1c37a1 platforms/arty: add missing pullups on sdcard. 2020-07-21 15:22:39 +02:00
Florent Kermarrec
2ce24df76d platforms/genesys2: add internal_vref to 0.750v on bank 34 (DDR3). 2020-07-18 22:18:41 +02:00
Florent Kermarrec
135c387155 platforms/ulx3s: add assertion for supported devices. 2020-07-17 12:04:06 +02:00
Florent Kermarrec
851378f0a9 platforms/trellisboard: move ddram_vtt_en. 2020-07-17 12:03:37 +02:00
Vamsi K Vytla
44ad902aad platforms/kc705.py: LPC DP0_M2C/C2M diff pair 2020-07-13 10:26:17 -07:00
Greg Davill
a461f5ac59 orangecrab: add usb, rst_n signals for r0.1 
- fix standard io extensions
 - Use newly assigned code for orangecrab 1209:5af0
 2020-07-09 19:56:32 +09:30
enjoy-digital
f3d02d8fca
Merge pull request #87 from antmicro/arty_i2s 
arty: Add configuration of I2S pins
 2020-07-07 17:22:10 +02:00
Pawel Sagan
df54b93db3 arty: Add configuration of I2S pins 2020-07-07 15:25:10 +02:00
Florent Kermarrec
40fbbbbebc platforms/orangecrab: add sdcard pins on r0_2. 2020-07-06 17:48:48 +02:00
enjoy-digital
49973990f3
Merge pull request #85 from oskirby/logicbone 
Add Logicbone ECP5 board
 2020-06-29 16:24:15 +02:00
Owen Kirby
76a32ba8ec Add Logicbone ECP5 board 
The Logicbone is an Open Source development board for the Lattice ECP5
being developed at https://github.com/oskirby/logicbone
 2020-06-27 03:32:47 -07:00
Florent Kermarrec
782c856619 platforms/genesys2: add usb_fifo. 2020-06-23 18:02:53 +02:00
Florent Kermarrec
936ba5b279 platforms/genesys2: add openocd specific configuration (channel 1 used for JTAG). 2020-06-23 11:55:50 +02:00
Florent Kermarrec
55ed9fbf02 platforms/kcu105: add sdcard/spisdcard. 2020-06-23 11:44:40 +02:00
Florent Kermarrec
eee00ebd0a platforms/genesys2: add sdcard/spisdcard. 2020-06-23 11:44:26 +02:00
Florent Kermarrec
6568c8a3ae platforms/netv2: add spisdcard. 2020-06-23 11:44:10 +02:00
Florent Kermarrec
7de7c4be5c platforms/kc705: rename mmc to sdcard and make it similar to other boards. 2020-06-23 10:56:31 +02:00
Florent Kermarrec
0ecb8609b3 platform/arty: also update spisdcard. 2020-06-16 20:15:12 +02:00
Florent Kermarrec
7a8b0b743d platforms/pano_logic_g2: -x. 2020-06-16 19:53:46 +02:00
Kamil Rakoczy
f70655d1ac Change sdcard Pmod from JB to JD 
Signed-off-by: Kamil Rakoczy <krakoczy@antmicro.com>
 2020-06-15 12:01:46 +02:00
Florent Kermarrec
04f6d4463a versa_ecp5: simplify device (LFE5UM5G or LFE5UM) and adapt integrated_rom_size only for Microwatt. 2020-06-13 11:17:05 +02:00
Raptor Engineering Development Team
90092164c8 Add device option for ECP5 Versa board 
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
 2020-06-12 18:39:43 -05:00
Florent Kermarrec
9b45ec0f35 de10lite: simplify vga terminal. 2020-06-11 19:59:32 +02:00
Florent Kermarrec
85cac7abc0 de10nano/Mister: review/simplify. 2020-06-11 19:54:55 +02:00
Florent Kermarrec
c94cbae0c0 orangecrab: add user_led (RGB leds), DFUProg and --load support. 2020-06-11 19:21:40 +02:00
enjoy-digital
9aea2272eb
Merge pull request #80 from rob-ng15/master 
Use 128mb sdram, uart via i/o port on i/o board and vga terminal via i/o board
 2020-06-11 18:16:18 +02:00
enjoy-digital
ad1693a1ad
Merge pull request #82 from Disasm/colorlight-5a-75e 
Add Colorlight 5A-75E V7.1 board
 2020-06-10 23:09:26 +02:00