50939fdd33
software/liblitedram/sdram_write_leveling: allow external configuration of cdly_range_start and cdly_range_end.
2021-01-14 13:18:10 +01:00
35a8b498a0
tools/litex_json2dts/sdcard: use sdphy base as csr base.
...
To be similar with csr base defined used in linux-on-litex-rocket.
2021-01-14 09:28:06 +01:00
83fb79fb0c
tools/litex_term: review/simplify a bit PR #772 .
2021-01-13 19:33:29 +01:00
9a9f7984ef
Merge pull request #772 from cr1901/lxterm-winfix
...
Windows fixes for `litex_term`
2021-01-13 19:24:05 +01:00
737ed9d658
setup: remove litex_simple setup from entry points.
...
Now provided by LiteX-Boards: https://github.com/litex-hub/litex-boards/blob/master/litex_boards/targets/simple.py
2021-01-12 17:21:26 +01:00
ce243820fe
tools/litex_term: Convert some common scan codes into ANSI codes on Windows.
2021-01-11 21:02:37 -05:00
5babcadbed
tools/litex_term: Set ENABLE_VIRTUAL_TERMINAL_PROCESSING flag on Windows.
2021-01-11 19:54:21 -05:00
bfc624f23e
tools/litex_term: Avoid importing termios and pty on Windows.
2021-01-11 14:51:55 -05:00
460fada3ac
tools/litex_term: revert LiteXTerm to threading (multiprocessing breaks Windows/OS-X).
...
Ideally we should switch to AsyncIO as some point.
2021-01-11 19:29:15 +01:00
1ce194007b
software: allow BIOS compilation with UART disabled.
2021-01-08 19:18:44 +01:00
19fda3364a
tools/litex_term: fix 100% cpu load after refactoring (thanks sergpolkin).
2021-01-08 13:57:33 +01:00
5f9c4a4ab4
soc/cores/gpio: remove intermediate _pads signal.
2021-01-06 21:39:02 +01:00
0984308318
cores/gpio: add assertion on pads (has to be a Signal).
...
Due to the bi-directional nature of tristate, Cat is not supported (so also
not platform.request_all).
2021-01-06 09:56:56 +01:00
8109806609
Merge pull request #768 from davidlattimore/nx-320kb-ram
...
Lattice NX: Allow up to 320KB of RAM
2021-01-06 08:55:27 +01:00
875f34f8e2
Lattice NX: Allow up to 320KB of RAM
2021-01-06 09:45:08 +11:00
16008d3f3a
cpu/vexriscv/cpu-count: fix type and add comment (thanks dayjaby).
2021-01-04 14:43:08 +01:00
f31f9a20f0
boards: remove and switch to litex_boards.
...
Keeping board definition files directly in LiteX is no longer useful since we are already relying on board
definitions files from LiteX-Boards (https://github.com/litex-hub/litex-boards ) in various benches/projects
and having definitions files directly in LiteX creates confusion/additional work.
For projects using board definition files from LiteX, the litex.boards import can just be replaced with litex_boards:
from litex.boards.platforms import kc705
from litex_boards.platforms import kc705
2021-01-04 14:09:35 +01:00
afbac26e80
Merge pull request #754 from cr1901/picorv32-riscv32
...
Use riscv32 gcc triples for picorv32- superset of riscv64 triples.
2020-12-31 09:32:31 +01:00
f65491c809
Use riscv32 gcc triples for picorv32- superset of riscv64 triples.
2020-12-31 03:22:56 -05:00
737952577b
Changes: update/release.
2020-12-30 16:49:15 +01:00
b9e0c95c18
cpu/microwatt: use 0xf9807b6 and fix compilation, working with IRQs :)
...
Tested with:
/arty.py --cpu-type=microwatt --cpu-variant=standard+irq --integrated-rom-size=0x10000 --build --load
__ _ __ _ __
/ / (_) /____ | |/_/
/ /__/ / __/ -_)> <
/____/_/\__/\__/_/|_|
Build your hardware, easily!
(c) Copyright 2012-2020 Enjoy-Digital
(c) Copyright 2007-2015 M-Labs
BIOS built on Dec 30 2020 15:59:16
BIOS CRC passed (fb76e85d)
Migen git sha1: d42aa6f
LiteX git sha1: 74844db3
2020-12-30 16:20:20 +01:00
74844db3b9
cores/cpu: add optional add_soc_components method and use it to add VexRiscv-SMP's PLIC/CLINT and Microwatt's XCIS.
...
Also shorten XCIS name on Microwatt from HOSTXICS to XCIS.
2020-12-30 15:35:27 +01:00
49217ec6ea
cores/cpu/vexriscv_smp: minor cleanups.
2020-12-30 14:45:33 +01:00
a8ddbb190a
cores/cpu/vexriscv_smp: add standard variant (similar to Linux, avoid passing cpu-variant=linux when selection vexriscv_smp).
2020-12-30 14:41:54 +01:00
7bcebf4cdd
cpu/microwatt: improve/fix XICS controller integration for variants with irq.
2020-12-30 12:25:01 +01:00
0cba91022e
cpu/vexriscv_smp: move smp_slave to crt0. Fixes bare metal demo compilation with VexRiscv-SMP.
2020-12-30 11:56:11 +01:00
4f6bc32a5a
software/demo: make leds optional.
...
Allow running demo directly with litex_sim:
litex_sim (then exit with ctrl-c on BIOS prompt)
litex_bare_metal_demo --build-path=build/sim/
litex_sim --ram-init=demo.bin
2020-12-30 11:25:32 +01:00
052a76f253
README: update example projects built with the tools, remove 2020.04 note.
2020-12-30 11:06:55 +01:00
3e115a0ecb
CHANGES: update.
2020-12-30 09:06:36 +01:00
db5f017341
README: add link LiteX-Boards in ecosystem table.
2020-12-30 08:37:11 +01:00
8ff26b7304
targets/arty: add variant support through --variant argument.
...
./arty.py --variant=a7-35 or a7-100
2020-12-29 18:45:41 +01:00
70d364cf4e
integration/soc: add software_debug parameter to add_ethernet, add_(spi)sdcard to ease enabling software debug traces from design.
2020-12-29 15:38:46 +01:00
c7056b77bb
tools/litex_json2dts/soc_controller: remove VexRiscv-SMP workaround now that we able to use upstream linux litex patches.
2020-12-29 12:25:38 +01:00
7627dadb9b
tools/litex_json2dts/soc_controller: add workaround for VexRiscv-SMP.
...
We need to fix https://github.com/litex-hub/linux-on-litex-vexriscv/issues/176
to be able to switch to soc-controller with VexRiscv-SMP.
2020-12-29 09:29:23 +01:00
d5bf09d8f4
Merge pull request #747 from shenki/soc-controller-compatible
...
dts: Fix soc controller compatible
2020-12-29 09:23:03 +01:00
bf32d23d9a
tools/litex_json2dts: add --polling args to allow forcing polling mode on peripherals.
...
Can be useful for debug purpose or bring up of new hardware not yet supporting IRQs.
2020-12-29 09:03:35 +01:00
d9a44ce10f
tools/litex_json2dts: minor changes/cleanup on #745 .
...
- shorten args description.
- avoid mixing initrd_start/initrd_start_offset: just use initrd_start and indicate it's relative.
- others minor cleanups.
2020-12-29 08:36:55 +01:00
152ae03798
Merge pull request #745 from stffrdhrn/dts-interrupts
...
RFC dts: Support generating interrupt config
2020-12-29 08:16:19 +01:00
cf9ea62193
Merge pull request #749 from stffrdhrn/dts-initrd-size
...
dts: Allow specifying initrd position and size via args
2020-12-29 08:09:15 +01:00
a2c9b17959
dts: Allow specifying initrd position and size via args
...
This is needed as my initrd size is much larger than the default 8mb.
Also, sometimes the kernel I build is also large, so its good to be
able to move the initrd starting position.
Issue #748
2020-12-29 08:18:55 +09:00
5cc2c4aaf7
dts: Support generating interrupt config
...
This addresses #744
2020-12-28 09:51:22 +09:00
13345bfe7f
dts: Fix soc controller compatible
...
The version that landed upstream is spelt litex,soc-controller with a
dash instead of an underscore.
Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-12-27 22:40:29 +10:30
bddb170650
Merge pull request #742 from rprinz08/master
...
Enable etherbone usage on multiple ethernet interfaces
2020-12-23 10:44:40 +01:00
c99c96bc68
Enable etherbone usage on multiple ethernet interfaces
2020-12-22 21:13:10 +01:00
1a338b602a
software/bios: add new mem_list command to list available memory regions.
...
This is useful to know the memory regions available and use the mem_xy commands
on them:
List the memory regions:
litex> mem_list
Available memory regions:
ROM 0x00000000 0x8000
SRAM 0x01000000 0x2000
MAIN_RAM 0x40000000 0x10000000
CSR 0x82000000 0x10000
Test 0x1000 bytes of MAIN_RAM:
litex> mem_test 0x40000000 0x1000
Memtest at 0x40000000 (4KiB)...
Write: 0x40000000-0x40001000 4KiB
Read: 0x40000000-0x40001000 4KiB
Memtest OK
Test speed on 0x1000 bytes of MAIN_RAM:
litex> mem_speed 0x40000000 0x1000
Memspeed at 0x40000000 (4KiB)...
Write speed: 352KiB/s
Read speed: 288KiB/s
2020-12-22 19:15:57 +01:00
b3a0b4b60d
Merge pull request #737 from stffrdhrn/or1k-linux-insns
...
mor1kx: Enable rotate, fpu and sign extensions under linux
2020-12-22 09:40:53 -08:00
3067c57080
mor1kx: Enable gcc compiler flag for cmov
...
We enable this instruction so use it.
2020-12-22 22:10:42 +09:00
51327e00b5
mor1kx: Enable rotate, sign extend under linux, new fpu extension
...
My thought is that if we are running linux the FPGA should be able to
handle these extra instruction's footprint. Also, since we are running
on linux there may be any kind of software running on the CPU, so allow
handling these instructions.
FPU is added bia a new +fpu extension.
But really, I am running GLIBC tests and they run faster with this
enabled.
2020-12-22 22:10:42 +09:00
d90d3e043b
software/liblitedram: add optional SDRAM_TEST_DISABLE that can be defined to full disable SDRAM test.
...
This is useful in simulation where SDRAM contents is pre-initialized from files (ex Linux-on-LiteX-Vexriscv).
2020-12-22 10:50:15 +01:00
12dabde77c
integration/soc/add_ethernet: add phy_cd parameter to allow and demonstrate multiple PHYs support.
2020-12-22 09:03:00 +01:00
Florent Kermarrec
William D. Jones
David Lattimore
Stafford Horne
Joel Stanley
rprinz08
Tim Ansell