afcf78f643
soc/add_etherbone: Rename ethmac parameters with ethmac suffix since related to ethmac.
2024-02-07 19:21:38 +01:00
0ed44a2c04
Merge pull request #1886 from trabucayre/etherbone_hybrid_ip_mac
...
Etherbone hybrid ip mac
2024-02-07 14:15:42 +01:00
7f211048ac
soc/integration/soc/add_etherbone: adding ethernet mac address, local/remote ip as parameters, sanity check when hybrid mode and adding ip/mac constants
2024-02-07 12:49:03 +01:00
177df0b57e
soc/integration/soc: move add_ip_constant to helpers with a renaming to add_ip_address_constants, adding function to add MACADDRx constant
2024-02-07 12:44:59 +01:00
e866892798
soc/software/bios/boot: allow to override macaddr by using constant MACADDRx
2024-02-07 11:16:12 +01:00
13c57e8304
soc/integration/soc: add_etherbone/ClockDomainRenamer: keep sys connected to sys instead of eth rx
2024-02-07 07:21:35 +01:00
57bc0369c7
integration/soc/SocCSRHandler: Make supported_address_width/paging values explicit.
2024-02-05 12:57:06 +01:00
88e530d0e8
Merge pull request #1885 from smunaut/csr-paging-0x400
...
soc/integration: Allow 0x400 CSR paging
2024-02-05 12:44:51 +01:00
cd1088dbe9
Merge pull request #1884 from motec-research/efinix_spi_width
...
Efinix: suport spi width for passive loading
2024-02-05 12:43:30 +01:00
3127e504d3
soc/integration: Allow 0x400 CSR paging
...
It's a convenient way to get more CSR locations without changing
the whole address space layout (i.e. more space for CSR).
It still leaves 256 full 32b registers in each location which
I've never encountered a device even coming close to this, so
it should be fairly safe to do.
This doesn't change the default, just allow the user to select it.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2024-02-05 11:45:34 +01:00
f81c940e7b
litex/build/efinix: add binary output
...
This is the file required for passive SPI loading.
2024-02-05 11:00:39 +11:00
d9f006e123
litex/build/efinix: add spi_width
...
Doesn't seem needed for Trion but probably essential for Titanium?
2024-02-05 11:00:39 +11:00
a59b67e4ee
soc: Avoid .upper() on add_config/constant since already done in methods.
2024-02-01 08:44:52 +01:00
e498a56698
soc/add_spi_flash: Minor integration cleanup and remove PHY_FREQUENCY constants that is no longer used.
2024-02-01 08:42:11 +01:00
e44631294a
CHANGES.md: Update.
2024-02-01 08:34:17 +01:00
be23467cb1
Merge pull request #1881 from motec-research/spiflash_fixes
...
Spiflash fixes for issues exposed by sys_clk = 200MHz and L2 cache
2024-02-01 08:33:36 +01:00
fc85fdd178
build/openfpgaloader: support args with '-'
...
many openfpgaloader args have a name with '-' as per normal convention.
This kwarg now works: file_type="raw"
2024-02-01 15:53:51 +11:00
afe7b93995
software/liblitespi/spiflash: fix warnings
2024-02-01 14:37:22 +11:00
de594e44c9
software/bios/cmds: fix crc command with L2 cache
...
Same CRC was always reported if the memory region was in the cache...
Noticed when manually testing spiflash divisor.
2024-02-01 14:37:22 +11:00
3a890a077b
software/liblitespi/spiflash: fix clk_freq tuning with L2 cache
...
Correct CRC was always calculated, regardless of divisor, as the
test flash block was in the L2 cache. This resulted in the minimum
divisor being used and incorrect flash reads with 200MHz sys_clock.
2024-02-01 14:37:22 +11:00
e0416639f7
software/liblitespi/spiflash: fix reported flash clk
2024-02-01 14:37:22 +11:00
51c3cb3552
soc/add_spi_flash: default clk_freq to 20MHz
...
This is safer than defaulting to sys_clock / 2 if sys_clock > 100MHz
clk_freq tuning will result in a faster clock if supported by hardware.
2024-02-01 14:37:22 +11:00
1dddfa6841
soc/add_spi_flash: fix default divisor and PHY_CLOCK calculation
...
Ensure default_divisor is set to desired default - 1 as required by LiteSPIClkGen
Calculate actual PHY_CLK based on default_divisor
2024-02-01 14:37:22 +11:00
08189663ba
soc/add_spi_flash: fix bios 1x mode support
...
require both phy and flash support to enable QUAD/QPI capability.
Many flash devices support 4x read but may be on a 1x phy
2024-02-01 14:37:22 +11:00
4dae3a9f4d
build/openfpgaloader: report command line on error
...
Helps explain failures
2024-02-01 14:37:16 +11:00
f73fbee309
cores/spi/spi_master: Improve documentation, especially on Raw/Aligned mode and CS control.
2024-01-30 10:57:09 +01:00
a3904ac26d
CHANGES.md: Update.
2024-01-30 09:51:05 +01:00
488247e4f7
build/efinix/programmer: Define EFXDBG_HOME now required by latest Efinity versions.
2024-01-30 09:44:52 +01:00
245bed7195
soc/cores/clock/efinix: fix input clock code for trion when the input clock comes from another PLL
2024-01-25 17:39:12 +01:00
d32095540a
soc/integration/soc: add_ethernet/add_ip_constants: cast str to int (avoid double quote in soc.h
2024-01-24 16:06:44 +01:00
f543b18d02
soc/add_ethernet: Refactor local/remote_ip configuration and add basic checks for IP address length + validity.
2024-01-24 15:28:18 +01:00
115e87ff4f
Merge pull request #1877 from trabucayre/ethernet_local_remote_ip
...
soc/integration/soc: add_etherbone: allowing to specify local/remote IP
2024-01-24 15:15:31 +01:00
bcde71b051
soc/integration/soc: add_etherbone: allowing to specify local/remote IP
2024-01-24 15:13:42 +01:00
1be3f0297d
Merge pull request #1876 from trabucayre/vexriscv_configurable_clint_csr_addr
...
soc/cores/cpu/vexriscv_smp/core: allowing configure CSR/CLINT base address by overriding default value or using args
2024-01-23 16:27:16 +01:00
c31ec79981
CHANGES.md: Update.
2024-01-23 16:02:11 +01:00
bb62f7aa63
soc/cores/cpu/vexriscv_smp/core: allowing configure CSR/CLINT/PLIC base address by overriding default value or using args
2024-01-22 18:36:51 +01:00
4c07d72af3
Merge pull request #1874 from trabucayre/naxriscv_arch
...
soc/cores/cpu/naxriscv fix arch definition and small adjust
2024-01-19 10:22:43 +01:00
854541d5c7
soc/cores/cpu/naxriscv/core: adding argument to enable rvc extension
2024-01-19 07:37:55 +01:00
f00d49211b
soc/cores/cpu/naxriscv/core: force go back previous directory after git clone
2024-01-18 15:21:37 +01:00
4222a585c9
soc/cores/cpu/naxriscv/core: fix arch definition
2024-01-18 15:04:09 +01:00
b19d992f23
inteconnect/ahb: Add specific case for 32-bit data width, fix CSR accesses with gowin_ae350.
2024-01-15 11:40:25 +01:00
6b79644108
cores/cpu/gowin_emcu: Switch to LiteX's UART.
...
A UART does not cost that much ressources and this avoid specific code/allow simplifying support.
2024-01-11 13:53:15 +01:00
8aa5958fb7
cores/cpu: Add intitial gowin_ae350 support.
2024-01-11 13:11:56 +01:00
e689aab18a
interconnect/ahb/AHB2Wishbone: Add proper Wishbone sel decoder/support.
2024-01-11 10:17:22 +01:00
80dfb5ca34
interconnect/ahb/AHB2Wishbone: Simplify and add proper Address/Data-Phases.
2024-01-10 12:10:15 +01:00
a2c2d70841
build/gowin/gowin: adding list of additional cst commands (to place resources)
...
Signed-off-by: Gwenhael Goavec-Merou <gwenhael@enjoy-digital.fr>
2024-01-10 10:30:41 +01:00
31d3325219
build/gowin/platform: adding mock add_false_path_constraint method
...
Signed-off-by: Gwenhael Goavec-Merou <gwenhael@enjoy-digital.fr>
2024-01-10 10:30:36 +01:00
91fbc79ac2
build/gowin/common: adding missing TX/Q1 ODDR signals
2024-01-08 07:28:56 +01:00
718c26d8fc
cpu/gowin_emcu: Add interfaces directly to instances and simplify/cleanup to remove some warnings.
2024-01-04 19:33:43 +01:00
c61d2de13b
CHANGES.md: Update.
2024-01-04 15:37:58 +01:00
Florent Kermarrec
Gwenhael Goavec-Merou
Sylvain Munaut
Andrew Dennison
Gwenhael Goavec-Merou