201d60f37a
targets/netv2: switch to MVP DDR3 (K4B2G1646F instead of MT41J128M16)
2019-12-03 09:05:52 +01:00
6b82064723
targets: uniformize, improve presentation
2019-12-03 08:58:01 +01:00
718f69953b
README: fix LitePCIe Travis-CI link
2019-12-02 11:03:42 +01:00
6de20f185a
soc/interconnect/csr: add fields support for CSRStorage's write simulation method
2019-12-02 09:44:44 +01:00
2567a0ae1d
soc/cores/gpio: add GPIO Tristate
2019-12-01 21:26:37 +01:00
d702c0fe35
setup.py: update long_description
2019-11-30 19:30:50 +01:00
c9665aed38
README.md: use litex logo
2019-11-30 19:23:34 +01:00
82819dd536
README: switch to Markdown
2019-11-30 19:18:47 +01:00
90f9ffc505
Merge pull request #311 from kbeckmann/trellis_cabga256
...
trellis: Support the CABGA256 package
2019-11-29 19:05:56 -08:00
f411d6d362
trellis: Support the CABGA256 package
2019-11-30 02:50:41 +01:00
3d20442f6f
Merge pull request #310 from xobs/spi-flash-mode3-doc
...
spi_flash: correct documentation on SPI mode
2019-11-25 21:01:17 +01:00
581c23725e
spi_flash: correct documentation on SPI mode
...
The SPI mode is actually mode3, since the output value is updated on the
falling edge of CLK and the input value is updated on the rising edge.
This also clarifies some of the documentation based on experience with
the core.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-25 12:35:13 +08:00
de205d4a84
tools/remote/comm_udp: only use one socket
2019-11-22 15:28:35 +01:00
bdaca40fe4
build/generic_platform: avoid duplicate in GenericPlatform.sources
2019-11-22 15:28:07 +01:00
6883a43680
soc/cores/clock: change drp_locked to CSRStatus and connect it :)
2019-11-20 19:37:16 +01:00
36107cdfd7
soc/cores/clock: reset PLL/MMCM on all 7-series/Ultrascale with self.reset signal
2019-11-20 19:24:40 +01:00
e8e70b164a
Merge pull request #309 from antmicro/mmcm-fix
...
soc/cores/clock: add lock reg and assign reset
2019-11-20 19:20:15 +01:00
fd14b76594
soc/cores/clock: add lock reg and assign reset
...
It was necessary to add drp_locked CSR for reading LOCK signal from
MMCM. Additionally, input signal RESET from MMCM was not driven by
any signal to do a proper reset of MMCM module thus it was impossible
to perform entirely correct dynamic clock reconfiguration.
2019-11-20 16:22:49 +01:00
04017519c8
soc/interconnect/axi: add Wishbone2AXILite
2019-11-20 12:32:22 +01:00
4b073a440a
test/test_axi: cosmetic
2019-11-20 11:22:39 +01:00
d905521185
build/tools/get_migen/litex_git_revision: avoid git fatal error message is not installed as a git repository
2019-11-19 09:11:11 +01:00
02bfda5e38
Merge pull request #308 from gsomlo/gls-sdram-init
...
soc_sdram, bios/sdram: support sdram init for csr_data_width <= 32
2019-11-18 18:24:35 +01:00
3ef13fd27a
soc_sdram, bios/sdram: support sdram init for csr_data_width <= 32
...
Enable SDRAM to be initialized when csr_data_width > 8 bits.
Currently, csr_data_width up to 32 bits is supported.
Read leveling tested with csr_data_width [8, 16, 32] on the
ecp5-versa5g and trellisboard (using yosys/trellis/nextpnr),
and on the nexys4ddr (using Vivado).
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2019-11-18 09:00:19 -05:00
1efb18f1ea
soc/interconnect/packet/Depacketizer: another simplifcation pass
2019-11-18 09:06:56 +01:00
af52203c00
soc/interconnect/packet/Depacketizer: cleanup "ALIGNED-DATA-COPY" state
2019-11-17 11:57:14 +01:00
8272a00d6e
soc/interconnect/packet/Depacketizer: replace no_payload with sink_d.last
2019-11-17 11:50:09 +01:00
6059712794
test/test_packet: add randomness on ready output, fix corner-cases on Packetizer/Depacketizer
2019-11-16 14:39:18 +01:00
9642893371
test/test_packet: add randomness on valid input, fix corner-cases on Packetizer
2019-11-16 08:49:04 +01:00
888fd55bd8
Merge pull request #307 from sergachev/master
...
change >512 B CSR memory exception to a warning
2019-11-15 18:17:35 +01:00
2f2cfc9951
soc/interconnect/packet: fix synthesis (synthesis tools can do all sort of optimizations, but we still need to provide valid verilog :))
2019-11-15 16:19:05 +01:00
444ae951e9
change >512 B CSR memory exception to a warning
2019-11-15 15:34:12 +01:00
31661e9e2d
soc/interconnect/packet: connect error/last_be only present on both sink and source
2019-11-15 14:57:31 +01:00
2946581e50
soc/interconnect/packet: simplify/refactor Packetizer/Depacketizer to keep it simple
...
To avoid complex FSMs, let the synthesis tool do the simplifications when the FSM states are not reachable.
2019-11-15 14:39:55 +01:00
33c4d961b5
test/test_packet: add 32/64/128-bit loopback tests (passing :))
2019-11-15 11:37:52 +01:00
824faf9722
test/test_packet: prepare for testing dw > 8-bit
2019-11-15 11:32:42 +01:00
86662b54d0
soc/interconnect/packet: update copyright
2019-11-15 11:25:38 +01:00
5c19b133ac
soc/interconnect/packet: add > 8-bit support to Packetizer/Depacketizer
...
With high speed link (10gbps XGMII ethernet for example), stream data_width is generally
> 8-bit which make header/data un-aligned on bytes boundaries. The change allows the
Packetizer/Depacketizer to work on stream with a data_width > 8-bit.
2019-11-15 11:24:17 +01:00
5f151152ca
build/sim: cleanup run_as_root
2019-11-15 10:57:31 +01:00
446ae57b75
build/sim/modules: add XGMII 10Gbps ethernet module
...
Used to simulate SoCs with XGMII 10Gbps ethernet and to do LiteEth verification
2019-11-15 10:51:55 +01:00
56fbd2f250
sim/ethernet: remove trailing whitespaces
2019-11-15 10:39:49 +01:00
442e23d7fd
test: add initial test_packet
...
Use a header with 8,16,32,64,128-bit fields and test a Packetizer/Depacketizer loopback with random field values, random packet data & length.
2019-11-15 10:29:50 +01:00
eb3888f68e
tools/litex_sim: cleanup/update (no functional change)
2019-11-14 11:19:23 +01:00
4798d6b750
tools/litex_term: remove automatic reboot when flashing and clear mem_regions to avoid re-flashing on next reboot(s)
2019-11-11 18:38:10 +01:00
a17e307acf
bios/flash: minor cleanup on serialboot flashing, add flash address support
2019-11-09 00:05:36 +01:00
2d6100bdbe
Merge pull request #305 from FrankBuss/master
...
adding support to flash an FBI image
2019-11-08 23:51:49 +01:00
05e8abfee3
soc_core: add integrated-rom-file parameter to allow initializing rom from command line
2019-11-08 23:32:10 +01:00
0a030fe17d
cores/code_8b10b/Decoder: add basic invalid symbols detection
...
Check that we have 4,5 or 6 ones in the symbol. This does not report all
invalid symbols but still allow detecting issues with the link.
2019-11-08 19:43:01 +01:00
9857d9d9d2
adding support to flash an FBI image
2019-11-08 17:16:28 +01:00
c96f31a9ad
software/bios: rename ef command to fe (for consistency)
2019-11-08 13:14:21 +01:00
4a12a92d62
software/libbase/spiflash: rename CHIP_ERASE_CMD to CE_CMD (for consistency)
2019-11-08 13:13:54 +01:00
Florent Kermarrec
Tim Ansell
Konrad Beckmann
Sean Cross
Pawel Czarnecki
Gabriel Somlo
Ilia Sergachev
Vamsi K Vytla
fb@frank-buss.de