Florent Kermarrec
47e4a1b437
tools/litex_term: Avoid staying in safe mode on next upload when previous calibration failed.
2021-09-30 10:11:48 +02:00
enjoy-digital
4563ccae18
Merge pull request #1052 from developandplay/patch-5
...
Add ninja to toolchain setup
2021-09-30 09:33:28 +02:00
developandplay
5e2d03dad7
Add ninja to toolchain setup
...
In addition to meson I had to install ninja for the picolibc update.
Not sure if it was just an issue on my system but wanted to flag it.
2021-09-30 00:10:45 +02:00
Florent Kermarrec
5661480409
tools/litex_term: Add automatic inter-frame delay calibration and --safe mode.
...
By default, litex_term will now automatically try to find the best inter-frame delay/payload length
parameters to optimize upload speed. The --safe mode can also be used to disable outstanding frames
(and then wait ack for each frame), it will be slow on regular UARTs (that have high round-trip
latencis) but should always work.
2021-09-29 18:41:06 +02:00
Florent Kermarrec
80cb53fb04
software/bios/boot: Allow frame reception to time out during serial boot and do some cleanup/add comments.
...
Allowing the serial boot to time out during frame reception allows doing test on the Host side to
calibrate the minimum inter-frame delay and maximum payload length.
In the future, we should probably compute the CRC directly during frame reception and do the mempcpy
of frame N during the reception of frame N+1 to avoid these inter-frame constraints.
2021-09-29 18:33:59 +02:00
Florent Kermarrec
5a35aa9df6
software/libliteeth: Fix missing prototype warnings.
2021-09-28 17:46:23 +02:00
Florent Kermarrec
7bf6db5f9d
README: Add meson package install.
2021-09-28 16:27:30 +02:00
Florent Kermarrec
9a931324c2
get_data_mod: Update pip to pip3 to avoid issues on systems with Python2 still installed.
2021-09-28 16:27:13 +02:00
enjoy-digital
a5b3ab1bc9
Merge pull request #1051 from antmicro/picolibc-updates
...
Picolibc updates
2021-09-28 16:01:29 +02:00
Karol Gugala
9f1108c2fc
libc: refactor picolibc build deps
...
Signed-off-by: Karol Gugala <kgugala@antmicro.com>
2021-09-28 15:17:30 +02:00
Karol Gugala
b9c4d7ba51
libc: add _impure_ptr definition
...
Signed-off-by: Karol Gugala <kgugala@antmicro.com>
2021-09-28 15:17:08 +02:00
Karol Gugala
22f50ec7ff
libc: add errno include
...
This solves missing `__errno` symbol linker errors
Signed-off-by: Karol Gugala <kgugala@antmicro.com>
2021-09-28 15:16:34 +02:00
Florent Kermarrec
a588c3b830
software/libc: Disable Atomics support on fgetc/ungetc since seems broken (at least on Rocket).
2021-09-28 14:51:02 +02:00
enjoy-digital
99d8bbc3bc
Merge pull request #1050 from antmicro/fix-litex_setup_url
...
Revert litex_setup_url change
2021-09-28 14:28:29 +02:00
Florent Kermarrec
061b89beff
cpu/picolibc: Add family property to CPUs and directly use it for picolibc.
2021-09-28 14:20:13 +02:00
Florent Kermarrec
b451f102c6
software/libc/stdio: Simplify/Cleanup.
2021-09-28 14:04:24 +02:00
Florent Kermarrec
12c93ea895
litex_sim: Generate gtkw_savefile only with --trace.
2021-09-28 13:32:12 +02:00
Michal Sieron
c0e7e3acd3
Revert litex_setup_url change
2021-09-28 12:35:20 +02:00
Florent Kermarrec
782744bae3
tools/litex_sim/generate_gtkw_savefile: Check main_ram presence.
2021-09-28 10:02:17 +02:00
Florent Kermarrec
de738e153d
tools/litex_sim: Avoid double build iteration with pre_run_callback function.
2021-09-28 09:58:43 +02:00
Florent Kermarrec
c98c777bed
integration/builder: Avoid picolibc/compiler_rt dependencies when not using the LiteX BIOS & minor cleanups.
2021-09-28 08:57:49 +02:00
Tim Ansell
29fb1c48d0
Merge pull request #1046 from antmicro/libc-deps
...
software: libc: fix Makefile dependecies
2021-09-27 14:56:25 -07:00
Karol Gugala
d101ef7ed0
software: libc: fix Makefile dependecies
...
Signed-off-by: Karol Gugala <kgugala@antmicro.com>
2021-09-27 23:05:54 +02:00
Florent Kermarrec
01a906add7
software/liblitesdcard: Fix compilation with picolibc.
2021-09-27 18:56:18 +02:00
Florent Kermarrec
727d898a6c
software/libliteeth: Update/Fix compilation with picolibc.
2021-09-27 18:54:28 +02:00
Florent Kermarrec
54623dbe26
litex_setup: Update picolibc url (now on litex-hub).
2021-09-27 18:15:10 +02:00
enjoy-digital
7119dd8098
Merge pull request #1023 from lschuermann/dev/litex-sim-gmii-xgmii
...
litex_sim: add support for simulated GMII & XGMII, rewrite XGMII module
2021-09-27 17:48:44 +02:00
enjoy-digital
87f7f3bc45
Merge branch 'master' into dev/litex-sim-gmii-xgmii
2021-09-27 17:47:26 +02:00
Florent Kermarrec
9ab82cacda
soc/add_ethernet/etherbone: Fix conflicts/Update.
2021-09-27 17:43:39 +02:00
enjoy-digital
17abdfd12d
Merge pull request #1043 from enjoy-digital/rocket-remove-reset-inserter
...
cpu/rocket/core: Remove ResetInserter on adapters.
2021-09-27 16:34:46 +02:00
Florent Kermarrec
49f8652f91
ci: Install meson (now required by picolibc).
2021-09-27 16:19:56 +02:00
Florent Kermarrec
746d698b49
litex_setup.py: Revert LiteX url.
2021-09-27 16:15:16 +02:00
Florent Kermarrec
3d32ac3d2e
software: Avoid libase renaming to libutils/libcomm and keep readchar/putsnonl retro-compatibility.
...
We'll maybe do it but that's probably not the right time. We have to make
the picolibc switch as smooth as possible for users (and so avoid update
as much as possible).
In the long term, it would be good to provide a LiteX C SDK, so we'll make
eventual changes when doing this.
2021-09-27 16:15:13 +02:00
Florent Kermarrec
ae1d43b965
software/libc/Makefile: Use proper CFLAGS to avoid picolibc warnings and cleanup a bit Makefile.
2021-09-27 16:14:55 +02:00
enjoy-digital
c0b54f0105
Merge pull request #976 from antmicro/libbase-replacement
...
Replace libbase with picolibc
2021-09-27 16:05:24 +02:00
Florent Kermarrec
944732aa19
soc/add_sdram: Also remove ResetInserter on axi.AXI2Wishbone.
2021-09-27 15:46:19 +02:00
Florent Kermarrec
ce0551b44a
cpu/rocket/core: Remove ResetInserter on adapters.
...
Previously, the SoCController was only reseting the CPU, which required adding
these ResetInserters. Now that the SoCController resets both CPU and peripherals
these ResetInserters are redundant and no longer useful.
2021-09-27 09:05:46 +02:00
enjoy-digital
c43132f81f
Merge pull request #1040 from gsomlo/gls-rocket-smp
...
Rocket SMP support
2021-09-23 10:56:06 +02:00
Gabriel Somlo
07e47d9357
cpu/rocket: add quad-core (smp) variants
...
- 4-core "full" (fpu-enabled) variants with double, quad mem. bus width
- 4-core "linux" (fpu-less) variant with single (64-bit) mem. bus width
2021-09-22 16:59:04 -04:00
Gabriel Somlo
901b19828c
cpu/rocket: include core count as per-variant parameter
...
Repurpose (and rename to `CPU_SIZE_PARAMS`) the current
`AXI_DATA_WIDTHS` array. In addition to axi widths for
mem and mmio ports, also include each variant's number
of cores, to facilitate dynamically generated per-core
signals.
2021-09-22 16:58:11 -04:00
Gabriel Somlo
e6aaa40d2d
cpu/rocket: bios support for SMP
2021-09-22 13:51:18 -04:00
Gabriel Somlo
2bc8124114
cpu/rocket: crt0, boot-helper: use temp. registers (cosmetic)
2021-09-22 13:51:18 -04:00
enjoy-digital
1d302c56da
Merge pull request #1041 from gsomlo/gls-vex-smp-fix
...
cpu/vexriscv_smp/crt0.S: only boot core should run data_init
2021-09-22 19:35:47 +02:00
Florent Kermarrec
60c6077c32
remote/comm_udp: Add padding bytes to Etherbone probe.
...
Now required with LiteEth dropping exceeding payload.
2021-09-22 16:52:08 +02:00
Gabriel Somlo
23b2ac2013
cpu/vexriscv_smp/crt0.S: only boot core should run data_init
...
Also, no need for non-boot cores to `call smp_slave`, it's the
immediately following instruction for them already.
2021-09-22 09:55:20 -04:00
Florent Kermarrec
027f7aa645
tools/litex_json2dts_linux: Fix typo.
2021-09-21 14:32:20 +02:00
Florent Kermarrec
84f1afd6d4
tools/litex_json2dts_linux: Remove mem=/, init= and swiotlb= bootargs.
...
Were not useful as pointed by @shenki and @stffrdhrn.
2021-09-21 13:37:25 +02:00
enjoy-digital
b1b1e92ad0
Merge pull request #1032 from stffrdhrn/json2dts-sdcard
...
Json2dts sdcard booting
2021-09-21 13:13:07 +02:00
Andwer E Wilson
9f75c73d6b
build/xilinx/common: Fix Ultrascale SDROutput/Input.
2021-09-21 10:30:36 +02:00
enjoy-digital
233f0fc5f4
Merge pull request #1039 from tcal-x/rm-response-ok
...
Remove rsp_payload_response_ok from Vex/CFU hookup code.
2021-09-21 09:43:15 +02:00