54623dbe26
litex_setup: Update picolibc url (now on litex-hub).
2021-09-27 18:15:10 +02:00
7119dd8098
Merge pull request #1023 from lschuermann/dev/litex-sim-gmii-xgmii
...
litex_sim: add support for simulated GMII & XGMII, rewrite XGMII module
2021-09-27 17:48:44 +02:00
87f7f3bc45
Merge branch 'master' into dev/litex-sim-gmii-xgmii
2021-09-27 17:47:26 +02:00
9ab82cacda
soc/add_ethernet/etherbone: Fix conflicts/Update.
2021-09-27 17:43:39 +02:00
17abdfd12d
Merge pull request #1043 from enjoy-digital/rocket-remove-reset-inserter
...
cpu/rocket/core: Remove ResetInserter on adapters.
2021-09-27 16:34:46 +02:00
49f8652f91
ci: Install meson (now required by picolibc).
2021-09-27 16:19:56 +02:00
746d698b49
litex_setup.py: Revert LiteX url.
2021-09-27 16:15:16 +02:00
3d32ac3d2e
software: Avoid libase renaming to libutils/libcomm and keep readchar/putsnonl retro-compatibility.
...
We'll maybe do it but that's probably not the right time. We have to make
the picolibc switch as smooth as possible for users (and so avoid update
as much as possible).
In the long term, it would be good to provide a LiteX C SDK, so we'll make
eventual changes when doing this.
2021-09-27 16:15:13 +02:00
ae1d43b965
software/libc/Makefile: Use proper CFLAGS to avoid picolibc warnings and cleanup a bit Makefile.
2021-09-27 16:14:55 +02:00
c0b54f0105
Merge pull request #976 from antmicro/libbase-replacement
...
Replace libbase with picolibc
2021-09-27 16:05:24 +02:00
944732aa19
soc/add_sdram: Also remove ResetInserter on axi.AXI2Wishbone.
2021-09-27 15:46:19 +02:00
06ff638f7a
efinix: rgmii: fix, it's in a working state
2021-09-27 10:11:58 +02:00
1ea0797c82
efinix: ifacewriter: fix DRIVE_STRENGTH and REFCLK_FREQ
2021-09-27 10:11:00 +02:00
ce0551b44a
cpu/rocket/core: Remove ResetInserter on adapters.
...
Previously, the SoCController was only reseting the CPU, which required adding
these ResetInserters. Now that the SoCController resets both CPU and peripherals
these ResetInserters are redundant and no longer useful.
2021-09-27 09:05:46 +02:00
179a8018b3
efinix: RGMII phy should be operational (no tested)
...
PLL infrastructure should be complete now.
We can also use DDIO input and outputs.
However, there is problem (bug) during P&R:
ERROR(1): [Line 52] Block auto_eth_tx_delayed_clk is
an output pad but sub-block 1 is not an output pad location.
Inderface Designer validation doesn't report any problem.
I have a test project with the same configuration (I compared
the reports for blocks configuration) and it works.
2021-09-23 17:21:17 +02:00
c43132f81f
Merge pull request #1040 from gsomlo/gls-rocket-smp
...
Rocket SMP support
2021-09-23 10:56:06 +02:00
07e47d9357
cpu/rocket: add quad-core (smp) variants
...
- 4-core "full" (fpu-enabled) variants with double, quad mem. bus width
- 4-core "linux" (fpu-less) variant with single (64-bit) mem. bus width
2021-09-22 16:59:04 -04:00
901b19828c
cpu/rocket: include core count as per-variant parameter
...
Repurpose (and rename to `CPU_SIZE_PARAMS`) the current
`AXI_DATA_WIDTHS` array. In addition to axi widths for
mem and mmio ports, also include each variant's number
of cores, to facilitate dynamically generated per-core
signals.
2021-09-22 16:58:11 -04:00
e6aaa40d2d
cpu/rocket: bios support for SMP
2021-09-22 13:51:18 -04:00
2bc8124114
cpu/rocket: crt0, boot-helper: use temp. registers (cosmetic)
2021-09-22 13:51:18 -04:00
1d302c56da
Merge pull request #1041 from gsomlo/gls-vex-smp-fix
...
cpu/vexriscv_smp/crt0.S: only boot core should run data_init
2021-09-22 19:35:47 +02:00
60c6077c32
remote/comm_udp: Add padding bytes to Etherbone probe.
...
Now required with LiteEth dropping exceeding payload.
2021-09-22 16:52:08 +02:00
23b2ac2013
cpu/vexriscv_smp/crt0.S: only boot core should run data_init
...
Also, no need for non-boot cores to `call smp_slave`, it's the
immediately following instruction for them already.
2021-09-22 09:55:20 -04:00
109dbd1d62
efinity: small fixes
...
- do not include *.vh files in project,
- add self.options to class EfinityToolchain
- remove unconditional call to self.ifacewriter.add_ddr_xml
2021-09-22 09:53:27 +02:00
b24475b07d
Add an hacked no we memory for Efinix
...
Efinity synthesizer cannot infer RAM blocks with write enable.
In order to workaround this (at least for the Litex SoC intergrated
RAM/ROM) a dirty modified Memory class has been created.
This class needs to be rewrite !
2021-09-22 09:47:51 +02:00
027f7aa645
tools/litex_json2dts_linux: Fix typo.
2021-09-21 14:32:20 +02:00
bd71dc663f
efinix: more DDR work, still WIP
2021-09-21 14:23:36 +02:00
b765bdf34e
efinix: pll: allow output name to be changed
2021-09-21 14:23:00 +02:00
7a5f5a3682
efinix: remove redundant param in _build_xml
2021-09-21 14:22:17 +02:00
84f1afd6d4
tools/litex_json2dts_linux: Remove mem=/, init= and swiotlb= bootargs.
...
Were not useful as pointed by @shenki and @stffrdhrn.
2021-09-21 13:37:25 +02:00
b1b1e92ad0
Merge pull request #1032 from stffrdhrn/json2dts-sdcard
...
Json2dts sdcard booting
2021-09-21 13:13:07 +02:00
24a920f2d1
efinix: add preliminary DDR support (WIP)
2021-09-21 10:58:54 +02:00
9f75c73d6b
build/xilinx/common: Fix Ultrascale SDROutput/Input.
2021-09-21 10:30:36 +02:00
233f0fc5f4
Merge pull request #1039 from tcal-x/rm-response-ok
...
Remove rsp_payload_response_ok from Vex/CFU hookup code.
2021-09-21 09:43:15 +02:00
08779202f4
build/DDRTristate: Fix inconsistencies with SDRTristate (o/i swap).
2021-09-21 08:18:06 +02:00
1be449d72b
Remove rsp_payload_response_ok from Vex/CFU hookup code.
...
The port has already been removed from VexRiscv (issue #1036 ).
Signed-off-by: Tim Callahan <tcal@google.com>
2021-09-20 15:02:51 -07:00
1e24fd87d1
cores/gpio: Simplify #1035 .
2021-09-20 17:34:46 +02:00
6251474b39
Merge pull request #1035 from lschuermann/dev/litex-sim-gpio
...
litex_sim: optionally add GPIOTristate core
2021-09-20 17:21:29 +02:00
0daa86a8bb
Merge pull request #1038 from antmicro/crosslinknx-ddr-tristate
...
build/lattice: add DDRTristate for Crosslink-NX
2021-09-20 14:14:40 +02:00
49d8000d49
gowin/common: Add Differential Input/Output support.
2021-09-20 14:14:06 +02:00
b9e99f576c
efinix: use proper xml to create project file
2021-09-20 13:35:45 +02:00
9c373242af
gowin: Add HyperRAM integration hack to match Gowin EDA expected pattern.
2021-09-20 11:47:32 +02:00
6c0a758468
Added syn_useioff attribute support for Oxide toolchain and for the DDRTristate in Crosslink NX
...
Signed-off-by: Maciej Kurc <mkurc@antmicro.com>
2021-09-20 11:02:01 +02:00
efebefecea
efinix: add PLL reset and locked pins
2021-09-20 10:42:27 +02:00
a026dd8946
efinix: add AsyncResetSynchronizer
2021-09-20 10:41:59 +02:00
08be77caaf
efinix: ifacewriter, enable design generation
2021-09-20 10:41:00 +02:00
5519d908e8
cores/video: Rename VideoECP5HDMIPHY to VideoHDMIPHY since in fact generic and can be used on other FPGAs (ex Tang Nano 4k).
2021-09-20 09:29:05 +02:00
106b1f29a7
efinix: fix programmer load_bitstream
2021-09-20 08:42:27 +02:00
4fe085cc1c
cores/clock: Add initial GW1NSR's PLL support.
2021-09-20 08:39:25 +02:00
76c782c546
inetgration/builder: Check for full software re-build only when a CPU is used.
2021-09-20 08:31:22 +02:00
Florent Kermarrec
Franck Jullien
Gabriel Somlo
Andwer E Wilson
Tim Callahan
Maciej Kurc