50e857e99c
sdram/phy/s6ddrphy: add S6QuarterRateDDRPHY to run DDR3 at higher frequencies.
...
Built on top of S6HalfRateDDRPHY, exposes a 4 phases DFI interface to the controller with a 2x slower clock.
Validated on the Numato Lab opsis board (50MHz sys_clk/ DDR400), should also work on the Novena laptop (same DDR3 module).
2015-08-22 12:17:48 +02:00
158fbe49ac
sdram/phy/s6ddrphy: rename S6DDRPHY to S6HalfRateDDRPHY and use ORed wrdata_en/rddata_en (the controller already manages that)
2015-08-22 11:47:26 +02:00
c03ef526eb
sdram/phy/s6ddrphy: add DDR3 support
2015-08-04 12:29:42 +02:00
52fba05e26
sdram/phy/initsequence: add burst chop 4 (BC4) for DDR3
...
This is needed for half rate controllers with burst length of 4.
For best efficiency quarter rate controllers should be used.
2015-08-04 11:19:20 +02:00
f96a856c97
sdram/phy: fix simphy memory usage
2015-06-02 19:33:09 +02:00
2ccb5655c9
global: more pep8
...
we will have to continue the work... volunteers are welcome :)
2015-04-13 18:02:26 +02:00
fc68d915c1
global: pep8 (E261, E271)
2015-04-13 17:16:12 +02:00
f3c010c1d5
global: pep8 (E225)
2015-04-13 17:01:05 +02:00
796119fcaf
global: pep8 (E203)
2015-04-13 16:53:07 +02:00
f68423f423
global: pep8 (E302)
2015-04-13 16:47:22 +02:00
d9e09707ae
global: pep8 (replace tabs with spaces)
2015-04-13 16:19:55 +02:00
d6c19858fa
s6ddrphy: redo phase_sel, get rid of CLOCK_DEDICATED_ROUTE
2015-04-10 16:12:29 +08:00
75ee8a5db9
sdram/phy/simphy: OK with DDR3
2015-03-28 01:59:55 +01:00
51ce7cad6f
sdram/phy/simphy: expose settings to user and test with DDR/LPDDR/DDR2
2015-03-28 01:18:35 +01:00
9137b91e9e
sdram: remove nbits from modules and databits from GeomSettings
2015-03-26 23:27:37 +01:00
9a9af17aca
sdram/phy/simphy: remove use of iter
2015-03-26 23:02:23 +01:00
e6de4b1bf9
sdram/phy: add simphy (software memtest OK in simulation with MT48LC4M16)
2015-03-26 22:28:32 +01:00
ba8b24df57
sdram: pass module as phy parameter, define memtype in modules and only keep phy parameter in register_sdram_phy
2015-03-25 16:57:38 +01:00
7ea9e2ba89
sdram: use names that are more explicit for bank_a, row_a,...: bankbits, rowbits, .... Add databits to GeomSettings.
2015-03-25 16:56:29 +01:00
905be50451
sdram: move lasmibus to core, rename crossbar to lasmixbar and move it to core, move dfi to phy
2015-03-03 09:55:25 +01:00
9210272356
sdram: pass phy_settings to LASMIcon, MiniCON and init_sequence
2015-03-03 09:23:21 +01:00
2f7206b386
sdram: revert use of scalar values for DFIInjector
2015-03-03 09:09:54 +01:00
8280acd3a7
sdram: only keep frontend logic and sdram core declaration in soc/sdram.py, move other logic to sdram/core
2015-03-02 12:17:49 +01:00
3465db25a7
soc/sdram: be more generic in naming
2015-03-02 11:55:28 +01:00
de698c51e4
sdram: rename self.phy_settings to self.settings (using phy.settings instead of phy.phy_settings seems cleaner)
2015-03-02 11:29:43 +01:00
7300879b7f
sdram: move dfii to phy
2015-03-02 09:08:28 +01:00
2c51adcd68
misoclib: better organization (create cores categories: cpu, mem, com, ...)
2015-02-28 09:40:44 +01:00
Florent Kermarrec
Robert Jordens