746d698b49
litex_setup.py: Revert LiteX url.
2021-09-27 16:15:16 +02:00
3d32ac3d2e
software: Avoid libase renaming to libutils/libcomm and keep readchar/putsnonl retro-compatibility.
...
We'll maybe do it but that's probably not the right time. We have to make
the picolibc switch as smooth as possible for users (and so avoid update
as much as possible).
In the long term, it would be good to provide a LiteX C SDK, so we'll make
eventual changes when doing this.
2021-09-27 16:15:13 +02:00
ae1d43b965
software/libc/Makefile: Use proper CFLAGS to avoid picolibc warnings and cleanup a bit Makefile.
2021-09-27 16:14:55 +02:00
c0b54f0105
Merge pull request #976 from antmicro/libbase-replacement
...
Replace libbase with picolibc
2021-09-27 16:05:24 +02:00
c43132f81f
Merge pull request #1040 from gsomlo/gls-rocket-smp
...
Rocket SMP support
2021-09-23 10:56:06 +02:00
07e47d9357
cpu/rocket: add quad-core (smp) variants
...
- 4-core "full" (fpu-enabled) variants with double, quad mem. bus width
- 4-core "linux" (fpu-less) variant with single (64-bit) mem. bus width
2021-09-22 16:59:04 -04:00
901b19828c
cpu/rocket: include core count as per-variant parameter
...
Repurpose (and rename to `CPU_SIZE_PARAMS`) the current
`AXI_DATA_WIDTHS` array. In addition to axi widths for
mem and mmio ports, also include each variant's number
of cores, to facilitate dynamically generated per-core
signals.
2021-09-22 16:58:11 -04:00
e6aaa40d2d
cpu/rocket: bios support for SMP
2021-09-22 13:51:18 -04:00
2bc8124114
cpu/rocket: crt0, boot-helper: use temp. registers (cosmetic)
2021-09-22 13:51:18 -04:00
1d302c56da
Merge pull request #1041 from gsomlo/gls-vex-smp-fix
...
cpu/vexriscv_smp/crt0.S: only boot core should run data_init
2021-09-22 19:35:47 +02:00
60c6077c32
remote/comm_udp: Add padding bytes to Etherbone probe.
...
Now required with LiteEth dropping exceeding payload.
2021-09-22 16:52:08 +02:00
23b2ac2013
cpu/vexriscv_smp/crt0.S: only boot core should run data_init
...
Also, no need for non-boot cores to `call smp_slave`, it's the
immediately following instruction for them already.
2021-09-22 09:55:20 -04:00
027f7aa645
tools/litex_json2dts_linux: Fix typo.
2021-09-21 14:32:20 +02:00
84f1afd6d4
tools/litex_json2dts_linux: Remove mem=/, init= and swiotlb= bootargs.
...
Were not useful as pointed by @shenki and @stffrdhrn.
2021-09-21 13:37:25 +02:00
b1b1e92ad0
Merge pull request #1032 from stffrdhrn/json2dts-sdcard
...
Json2dts sdcard booting
2021-09-21 13:13:07 +02:00
9f75c73d6b
build/xilinx/common: Fix Ultrascale SDROutput/Input.
2021-09-21 10:30:36 +02:00
233f0fc5f4
Merge pull request #1039 from tcal-x/rm-response-ok
...
Remove rsp_payload_response_ok from Vex/CFU hookup code.
2021-09-21 09:43:15 +02:00
08779202f4
build/DDRTristate: Fix inconsistencies with SDRTristate (o/i swap).
2021-09-21 08:18:06 +02:00
1be449d72b
Remove rsp_payload_response_ok from Vex/CFU hookup code.
...
The port has already been removed from VexRiscv (issue #1036 ).
Signed-off-by: Tim Callahan <tcal@google.com>
2021-09-20 15:02:51 -07:00
1e24fd87d1
cores/gpio: Simplify #1035 .
2021-09-20 17:34:46 +02:00
6251474b39
Merge pull request #1035 from lschuermann/dev/litex-sim-gpio
...
litex_sim: optionally add GPIOTristate core
2021-09-20 17:21:29 +02:00
0daa86a8bb
Merge pull request #1038 from antmicro/crosslinknx-ddr-tristate
...
build/lattice: add DDRTristate for Crosslink-NX
2021-09-20 14:14:40 +02:00
49d8000d49
gowin/common: Add Differential Input/Output support.
2021-09-20 14:14:06 +02:00
9c373242af
gowin: Add HyperRAM integration hack to match Gowin EDA expected pattern.
2021-09-20 11:47:32 +02:00
6c0a758468
Added syn_useioff attribute support for Oxide toolchain and for the DDRTristate in Crosslink NX
...
Signed-off-by: Maciej Kurc <mkurc@antmicro.com>
2021-09-20 11:02:01 +02:00
5519d908e8
cores/video: Rename VideoECP5HDMIPHY to VideoHDMIPHY since in fact generic and can be used on other FPGAs (ex Tang Nano 4k).
2021-09-20 09:29:05 +02:00
4fe085cc1c
cores/clock: Add initial GW1NSR's PLL support.
2021-09-20 08:39:25 +02:00
76c782c546
inetgration/builder: Check for full software re-build only when a CPU is used.
2021-09-20 08:31:22 +02:00
46cd9c5a5c
tools: Minor #1030 cleanups.
2021-09-17 14:37:48 +02:00
8ccb1a91c9
build/openfpgaloader/flash: Add external parameter to allow flashing external SPI Flash when available.
2021-09-17 14:37:14 +02:00
24f0432253
Merge pull request #1030 from teknoman117/fix-lxserver-pcie-crossover
...
Fixes to allow crossover uart over PCIe with lxterm and litex_server
2021-09-17 14:28:25 +02:00
a7c9e4ed42
Merge pull request #1033 from caverar/patch-1
...
Linker fix for initialized global variables
2021-09-17 14:23:44 +02:00
7f8e2e39f3
cores/video/VideoECP5HDMIPHY: Allow pn_swap on data lanes.
2021-09-16 18:56:05 +02:00
e8e14d8ca5
build/lattice: add DDRTristate for Crosslink-NX
2021-09-16 14:23:02 +02:00
f2a05e92fa
Add missing include to or1k/exception.c
2021-09-16 10:44:09 +02:00
3d4a64e112
Update stdio code in libc
...
Picolibc now requires to create stdin, stdout and stderr files
ourselves instead of __iob array. Thus changes and renaming
of iob.c to stdio.c
f320a0aa17
2021-09-16 10:44:07 +02:00
ef7b287248
Disable thread local storage (TLS) in picolibc
...
It was causing some compilation issues with lm32.
As global errno was enabled anyway, it was easier
to disable TLS whatsoever.
2021-09-16 10:43:44 +02:00
c84105f399
Disable LTO for picolibc and use picolibc.specs
...
Use picolibc.specs to specify integer only printf/scanf.
To do that, we need to pass specs file with options to
the linker. With LTO enabled, name mapping was failing,
so LTO is now disabled for picolibc compilation only.
This also means, that exchange.c and arc4random.c no
longer need to be recompiled and added back.
2021-09-16 10:43:41 +02:00
49c4ae9ec9
Add ppc64le-linux[-musl] to microwatt gcc triples
2021-09-16 10:42:54 +02:00
72e7eac0ef
Fix demo compilation
2021-09-16 10:42:54 +02:00
befd9c0e4c
Add comment documenting libc/missing.c
2021-09-16 10:42:54 +02:00
63094205d7
Add comment documenting libc/iob.c
2021-09-16 10:42:54 +02:00
c96c7f5c45
Fix machine specific directory copying
2021-09-16 10:42:54 +02:00
d3c23fb048
Remove libmisc
2021-09-16 10:42:54 +02:00
7fcc094b63
Don't filter out INCLUDE flags
2021-09-16 10:42:54 +02:00
cf59481567
Move machine specific code to their directories
2021-09-16 10:42:54 +02:00
66c54de785
Move sim_debug to the BIOS directory
2021-09-16 10:42:54 +02:00
b960ba0a67
Move stuff out of libbase
...
Removed libbase completely and moved remaining files into
libutils, libcomm and libmisc.
Libcomm is place for code used for communicating with other
devices, which doesn't yet live in its own liblite*.
Libutils is code used in multiple places, like crc calculation,
progress bar, memtests.
Libmisc is everything else like sim_debug, which is code for
litex_sim or exception.c for or1k.
2021-09-16 10:42:54 +02:00
91ce95fb49
Remove obsolete _include/dyld_
...
As per b5048f6cf1
2021-09-16 10:42:54 +02:00
6dc4908d12
Remove obsolete _include/basec++_
...
As per 7a9975ab5a
2021-09-16 10:42:54 +02:00
Florent Kermarrec
Gabriel Somlo
Andwer E Wilson
Tim Callahan
Maciej Kurc
Pawel Sagan
Michal Sieron