9649b1497c
uart2wishbone: fix missing payload.d
2014-10-16 09:37:43 +02:00
2319ee0ab7
uart2wishbone: always use payload.d and not .d
2014-10-15 12:13:22 +02:00
027ddc65ca
fill __init__.py to simplify imports
2014-10-10 17:24:36 +02:00
bf95ea6c1c
mila: simplify usage
2014-10-10 16:17:12 +02:00
d0c9838dca
uart2wishbone: share UARTRX and UARTTX with MiSoC
2014-10-10 15:15:58 +02:00
ba30a01830
mila: fixes when used without RLE
2014-10-06 12:30:06 +02:00
f72f11f7b4
mila: add clk_domain support
...
an AsyncFIFO is inserted when clk_domain is not "sys" to enable capture from another clock domain.
sys_clk frequency need to be greater than clk_domain clock.
future possible improvement: automatic insertion of a converter when clk_domain frequency is
greater than sys_clk.
2014-10-06 12:07:20 +02:00
7043e6a5f3
mila: simplify export
2014-10-01 10:06:59 +02:00
111f527647
do some clean up
2014-09-24 22:26:33 +02:00
2fb418a373
use new MiSoC UART with phase accumulators
...
this will allow to speed up MiLa reads
2014-09-24 21:56:15 +02:00
452a4a76f3
use verilog namespace to export mila configuration
2014-08-03 17:09:01 +02:00
6ffed70b59
uart2wishbone: disconnect rx line from shared pads when bridge is selected
...
(avoid CPU crash when we communicate with the bridge)
2014-08-03 13:15:56 +02:00
f4e6cebab2
clean up
2014-08-03 11:44:27 +02:00
cd51e78f54
storage: use SyncFIFOBuffered to implement fifo in block ram
2014-08-02 19:12:03 +02:00
47a85cc1ad
use new MiSoC fifo (no flush signal)
2014-08-01 10:36:15 +02:00
a0df5baa55
host: add support for various csr_data width (8 & 32 tested, but should work with others)
2014-06-26 13:22:21 +02:00
0f9bc5ad6e
fix bit inversion on CSV/PY exports
2014-06-21 19:06:47 +02:00
074a12b444
create dump class and specific export functions, add python dictionnary export
2014-06-19 13:24:47 +02:00
a737358919
host: split read/export and add csv export
2014-06-17 11:25:10 +02:00
8719206a3a
uart2wishbone: add default baudrate
2014-06-05 15:13:20 +02:00
b94cba2d4b
mila: add input pipe to ease timing
2014-05-24 09:23:16 +02:00
31e142fd88
drivers: clean up / fixes
2014-05-22 18:33:28 +02:00
9a059336bf
storage: simplify run length encoder...
2014-05-22 18:13:27 +02:00
0bc1cd6f77
fix uart selection when opening wishbone
2014-05-22 16:11:32 +02:00
1a07116ab1
change export format and simplify usage
2014-05-20 13:16:24 +02:00
ba0382ad92
move some functions in drivers and export layout in csv
2014-05-20 11:36:10 +02:00
2312127c1f
simplify and clean up
2014-05-20 09:56:35 +02:00
6f47a928b1
storage: simplify recorder...
2014-05-13 21:30:32 +02:00
c7e100f93b
sim: fix tb_trigger_csr
2014-05-13 17:45:15 +02:00
4c77c971f2
README: update and point to misoc-de0nano examples
2014-04-21 00:31:02 +02:00
171224329e
drivers: add genericity & prog_range_detector, prog_edge_detector methods
2014-04-21 00:17:23 +02:00
7a489b3135
refactor code
2014-04-20 23:53:33 +02:00
b766af0d99
uart2csr: add pads parameter
2013-09-25 15:07:23 +02:00
69009c8405
mila: test rle
2013-09-22 21:23:51 +02:00
a880862628
mila: symplify usage
2013-09-22 13:28:12 +02:00
27f26dac03
use custom Records instead of Sink/Source (semms easier, but will be reverted if not)
2013-09-22 13:14:11 +02:00
39f1f2146f
storage: add run length encoder
2013-09-22 12:35:46 +02:00
4fd6619171
trigger: add range_detector / edge_detector
2013-09-22 12:15:11 +02:00
980a83a74c
move trigger/recorder
2013-09-22 11:46:02 +02:00
452d266b14
com: add lm32 uart2wb bridge
2013-09-22 11:36:13 +02:00
8f35ed11b5
clean up/ simplify
2013-09-22 11:35:02 +02:00
ce9bff21e9
refactoring
2013-09-22 02:49:59 +02:00
89a8d8daf3
use new migen API
2013-06-16 13:12:57 +02:00
5c298f406c
simplify signals connexion
2013-06-02 15:15:47 +02:00
9405729b95
update README
2013-04-15 16:26:49 +02:00
48c1a902e5
adapt to new CSR API
2013-04-14 18:23:37 +02:00
4281a18deb
add stb signal
2013-04-02 21:13:21 +02:00
e5bf5f42d6
adapt to mibuild & migen changes
2013-03-26 22:24:29 +01:00
492a5acfe3
add Run Length Encoding
2013-03-23 22:06:08 +01:00
eeab7051be
remove doc (to be re-written)
2013-03-23 12:28:18 +01:00
Florent Kermarrec