ea20b74ed1
dvisampler/resdetection: use DE instead of hsync
2013-05-05 11:54:36 +02:00
e3e1dcd547
dvisampler: add sync polarity detection module (thanks Lars for suggestions)
2013-05-05 11:53:38 +02:00
71e3bba228
dvisampler/decoding: hold C when DE=1
2013-05-05 11:51:48 +02:00
4259699d78
dvisampler: add RawDVISampler
2013-05-04 20:40:21 +02:00
63073319b0
dvisampler/datacapture: swap bit pairs
2013-05-04 20:38:50 +02:00
8222ee7f46
framebuffer: use DMA controller from Migen
2013-04-30 18:55:35 +02:00
43ac5c8471
Remove undriven reset signals
2013-04-25 20:19:49 +02:00
4ff1175dcf
Use the Migen asynchronous FIFO
2013-04-25 19:43:26 +02:00
117b3b8ec7
adc: double-register asynchronous inputs
2013-04-19 12:32:12 +02:00
0dca526a85
milkymist/adc/__init__.py: CounterADC - simple counter-based ADC
...
This is a revised version of the counter-based ADC.
2013-04-19 12:29:17 +02:00
b018fcedc4
dvisampler/chansync: set synced to 0 when control tokens do not arrive at the same time
2013-04-16 22:21:03 +02:00
0d21711c1b
dvisampler/chansync: use Record.raw_bits()
2013-04-14 17:06:29 +02:00
8914969760
dvisampler/clocking: insert DCM_CLKGEN before PLL
2013-04-14 16:53:19 +02:00
7a6e56492c
edid.py: sample SCL only every 64 clock cycles, to avoid bouncing
...
Possibly due to SCL rising fairly slowly (in the 0.5-1 us range),
bouncing has been observed while crossing the "forbidden" region
between Vil(max) and Vih(min).
By lowering the sample rate from once per system clock to once
every 64 clock cycles, we make sure we sample at most once during
the bounce interval and thus never see a false edge. (Although we
may see a rising edge one sample time late, which is perfectly
harmless.)
2013-04-12 22:48:46 +02:00
950d3a4469
framebuffer: use new flow API
2013-04-10 21:34:15 +02:00
3be20f6ae4
dfii: adapt to new Record API
2013-04-02 00:15:42 +02:00
4f4f260e76
Convert to new CSR API
2013-03-30 17:28:15 +01:00
caa19f9ab2
framebuffer: larger counters
2013-03-29 17:15:11 +01:00
854c0461b4
framebuffer: process two pixels per system clock cycle
2013-03-28 20:46:16 +01:00
8fd092ca12
crg: support VGA pixel clock reprogramming
2013-03-28 19:07:17 +01:00
1e860c7472
Use new Mibuild generic_platform API
2013-03-26 17:57:17 +01:00
1045d64e6e
framebuffer: RGBA -> ARGB
2013-03-25 18:32:25 +01:00
8ee6dab4f9
fb: better ordering of pixels within ASMI words
2013-03-25 15:56:54 +01:00
1333367de8
dvisampler: add resolution detection
2013-03-24 00:45:29 +01:00
ee5bfd4d3d
dvisampler/charsync: report position
2013-03-24 00:44:50 +01:00
99f9ffa7e8
dvisampler/decoding: set C to 0 during data
2013-03-24 00:44:19 +01:00
fb9a2788e8
dvisampler/charsync: fix found_control signal
2013-03-24 00:43:22 +01:00
e06585d9fe
dvisampler: clean up EDID data
2013-03-23 13:48:40 +01:00
34b8388b45
dvisampler: decode before channel sync
2013-03-22 23:49:25 +01:00
037625886d
dvisampler: decoding
2013-03-22 21:28:17 +01:00
d65941d6cc
dvisampler: channel synchronization
2013-03-22 18:37:10 +01:00
515cdb2bd8
dvisampler: character synchronization
2013-03-21 22:56:13 +01:00
7c4ca4fd66
dvisampler/datacapture: deserialize to 10 bits
2013-03-21 19:06:15 +01:00
fa2331e084
dvisampler/clocking: generate pix reset
2013-03-21 19:02:04 +01:00
0a14c3714b
dvisampler: software controlled phase detector
2013-03-21 00:46:29 +01:00
28cb97068c
dvisampler/clocking: proper pix5x reset synchronization
2013-03-18 20:31:59 +01:00
5126f616fb
dvisampler: use pix5x as IODELAY clock
2013-03-18 19:03:17 +01:00
48aae9bee5
Use Instance.Input(..., ClockSignal/ResetSignal) instead of Instance.ClockPort/ResetPort
2013-03-18 17:44:01 +01:00
74cc045ee1
dvisampler/datacapture: connect IODELAY IOCLK0
2013-03-17 17:42:22 +01:00
621526fb7d
dvisampler/datacapture: fix tap counter reg
2013-03-17 17:36:49 +01:00
3a0cf278fd
dvisampler: fixes
2013-03-17 15:41:50 +01:00
9f02ced39e
dvisampler: add clocking and phase detector
2013-03-17 14:43:10 +01:00
0168f83523
MultiReg: remove idomain
2013-03-15 19:51:29 +01:00
b2173bba9f
Use new ClockDomain API
2013-03-15 19:17:05 +01:00
e99bafe52b
dvisampler: add core, EDID support
2013-03-13 19:56:26 +01:00
a23df42a7a
Use automatic register naming
2013-03-12 15:47:54 +01:00
a9b723568a
Use new module, autoreg and eventmanager Migen APIs
2013-03-10 19:32:38 +01:00
0caac2246d
Use new 'specials' API
2013-02-24 13:07:25 +01:00
a22ada36d7
corelogic -> genlib
2013-02-24 12:31:00 +01:00
5649e88a90
Use Mibuild
2013-02-11 18:23:06 +01:00
Sebastien Bourdeauducq
Werner Almesberger