555c444da2
mibuild/sim/dut_tb: fix permissions
2015-03-10 11:06:55 +01:00
9d8f1cd61d
mibuild/sim: get serial dev from /tmp/simserial
2015-03-10 00:42:54 +01:00
70a3e8081c
mibuild/sim: add support for pty
2015-03-09 23:31:11 +01:00
b157031e8a
uart/sim: add pty (optional, to use flterm)
2015-03-09 23:29:06 +01:00
6cbf13036b
liteeth/mac: fix padding limit (+1), netboot OK with sim platform
2015-03-09 20:59:34 +01:00
aa609bee15
mibuild/sim: remove hack, the issue was in gateware (padding)
2015-03-09 20:57:20 +01:00
47cceea222
liteeth/mac: use Counter in sram and move some logic outside of fsms
2015-03-09 20:22:14 +01:00
8e09a86e4f
genlib/misc: add increment parameter to Counter
2015-03-09 20:20:25 +01:00
ebcea3c000
fhdl/module: use r.append() in _collect_submodules
2015-03-09 19:45:02 +01:00
b10836a8eb
liteeth/phy/sim: create ethernet tap in __init__ and destroy it in do_exit
2015-03-09 17:21:29 +01:00
1b58813d13
soc: do_exit is now provided by modules
2015-03-09 17:18:42 +01:00
ee1091f491
fhdl/module: avoid flushing self._submodules and create do_exit.
2015-03-09 17:17:21 +01:00
efc5f221d9
mibuild/sim: clean up and move eth struct to sim
2015-03-09 14:40:33 +01:00
a72c091bc2
mibuild/sim: regroup console_tb/ethernet_tb in dut_tb
2015-03-09 14:40:31 +01:00
e82b540a96
mibuild/sim: remove server and interact with tap directly in cpp tb. for now: - need to create tap manually: create tap: openvpn --mktun --dev tap0 ifconfig tap0 192.168.0.14 up mknod /dev/net/tap0 c 10 200 delete tap: openvpn --rmtun --dev tap0 - ARP request/reply OK - TFTP request OK - need to be tested with TFTP server. - need clean up
2015-03-09 13:30:21 +01:00
3e84c66ba9
vivado: permit resources without pins
...
This is required if the LOC is done by another, external constraints set,
as in the case of the Zynq Processing System Instance.
2015-03-09 13:30:19 +01:00
360c849f21
liteeth: fix cnt_inc in IDLE state (we should wait sop to inc counter)
2015-03-09 13:23:39 +01:00
5dbd8af4be
liteeth: do not insert CRC/Preamble in simulation to allow direct connection to ethernet tap
2015-03-09 13:23:37 +01:00
e60a97534b
mibuild/sim: able to visualize arp requests with wireshark
...
now need to find why that is not responding...
2015-03-06 20:16:30 +01:00
a64acdfa65
mibuild/sim: able to send ethernet frame from sim to server.py
2015-03-06 12:49:56 +01:00
0029b87628
mibuild/sim: add ethernet pins to verilor.py
2015-03-06 12:20:17 +01:00
d20b9c2221
uart: pass *args, **kwargs to sim phy
2015-03-06 12:08:10 +01:00
658d4d4c49
platforms/sim: add ethernet pins
2015-03-06 10:20:26 +01:00
af66ca7bad
uart: add phy autodetect function
2015-03-06 10:19:29 +01:00
e133777450
targets/simple: add MiniSoC
2015-03-06 10:10:58 +01:00
95fa753149
liteeth: add phy autodetect function (phy can still be instanciated directly)
2015-03-06 10:10:34 +01:00
bee8ccf6c7
soc: enforce cpu_reset_address to 0 when with_rom is True
2015-03-06 08:21:16 +01:00
2b9397ff5b
targets: do not implement sdram if already provided by SoC (allow use of -Ot with_sdram = True)
2015-03-06 07:56:45 +01:00
7b00141a0c
genlib/cordic: fix typos
2015-03-06 00:47:23 +01:00
06f3c46e35
genlib/misc: fix missing *args in Counter
2015-03-04 23:49:15 +01:00
52f1c45407
LiteXXX cores: fix test_reg.py
2015-03-04 23:13:14 +01:00
60e87f6e87
Merge branch 'master' of https://github.com/m-labs/misoc
2015-03-04 00:46:41 +00:00
073641faa1
litesata: fix permissions and imports
2015-03-04 00:46:24 +00:00
200791c81d
uart: generate ack for rx (serialboot OK with sim)
2015-03-04 00:57:37 +01:00
3d7f9fd685
mibuild/sim/server_tb: use SERIAL_SINK_ACK
2015-03-04 00:55:35 +01:00
2d6fbd7902
mibuild/sim: use /tmp/simsocket sockaddr for server
2015-03-03 22:52:28 +01:00
f4b060f6fe
mibuild/sim: avoid updating end at each cycle (simulation speedup)
2015-03-03 18:01:14 +01:00
5ec26a49c3
mibuild/sim: simplify console_tb with sim struct
2015-03-03 17:57:58 +01:00
991572f4fe
mibuild/sim: create server.py and server_tb (Proof of concept OK with flterm)
...
Using a server allow us to create a virtual UART (and ethernet TAP in the future).
1) start the server
2) start flterm on the virtual serial port created by the server
3) run the simulation
This will enable us to do serialboot and netboot in simulation.
This will also enable prototyping ethernet for ARTIQ in simulation.
2015-03-03 17:38:22 +01:00
7c058a52c9
com/spi: use .format in tb
2015-03-03 10:44:05 +01:00
0716dadaf2
targets: keep the SPI flash core even if with_rom is enabled, so that flash booting in the BIOS still works
2015-03-03 10:39:31 +01:00
1d4dc45436
LiteXXX cores: use format in prints
2015-03-03 10:29:28 +01:00
f27e7a4b22
litesata: remove unneeded clock constraint
2015-03-03 10:24:05 +01:00
0bcd6daf63
soc: remove is_sim function
2015-03-03 10:15:11 +01:00
905be50451
sdram: move lasmibus to core, rename crossbar to lasmixbar and move it to core, move dfi to phy
2015-03-03 09:55:25 +01:00
9210272356
sdram: pass phy_settings to LASMIcon, MiniCON and init_sequence
2015-03-03 09:23:21 +01:00
2f7206b386
sdram: revert use of scalar values for DFIInjector
2015-03-03 09:09:54 +01:00
9df60bf98e
lasmicon: better management of optional bandwidth module (automatically inserted by -Ot with_memtest True)
2015-03-03 09:02:53 +01:00
f154c2e7ec
xilinx/programmer/vivado: fix Linux support
2015-03-03 02:06:39 +00:00
154ad54a8e
platforms/kc705: fix imports
2015-03-03 02:03:14 +00:00
Sebastien Bourdeauducq
Florent Kermarrec
Robert Jordens