2b49430f2c
README.md: Rewrite Welcome section and update copyright.
2021-07-08 12:08:24 +02:00
9a51dfb50e
tools/litex_sim: Let the SDRAMPHYModel pick default settings.
2021-07-08 09:09:57 +02:00
fced79631e
tools/litex_sim: sdram_module_nphases/get_sdram_phy_settings now directly integrated in litedram.phy.model.
2021-07-08 09:01:32 +02:00
34ba649f38
clock/lattice_ecp5/ECP5PLL: implement 4-output solver
...
Reimplement the configuration loop to allow all 4 outputs to be used by
the user, if one of them is suitable for use as VCO feedback.
The new strategy is to first iterate over requested outputs to see if
any of them can be used as a feedback source. If one can, it is
selected, and if no output is suitable, it attempts to instantiate one.
Once the feedback path is selected, the VCO frequency is known and it
attempts to calculate the remaining outputs' settings.
In addition, this implementation now respects datasheet limits in two
new ways:
- It respects the post-input-divider minimum frequency of 10MHz
- It respects the max output frequency of 400MHz for instantiated
feedback outputs
I am slightly unhappy with the seemingly-repetitive for loops. However
each one has slightly different sematics and I don't see a way to
combine them that doesn't hinder readability.
2021-07-07 01:15:06 -05:00
dd5413bc9f
Merge pull request #964 from niw/increase_macos_ttyusbmodem_delay
...
Increase delay for `tty.usbmodem` on macOS.
2021-07-06 18:51:28 +02:00
8b9f03efba
clock/lattice_ecp5/ECP5PLL: Expose standby signal
2021-07-06 08:40:36 -05:00
0953c52eea
Increase delay for `tty.usbmodem` on macOS.
...
**Problems**
On macOS USB CDC ACM, which appears as `/dev/tty.usbmodem*`,
somehow `lxterm` keeps failing to send a payload.
**Solution**
Increase delay.
It's very unknown why to me, however, probably macOS USB CDC ACM
driver implementation issue.
**Testing**
Tested on MacBook Air (2020, M1) for OrangeCrab (rev.0.2) target
with Linux on LiteX SoC bitstream build from current commit and
load prebuild Linux On LiteX image.
2021-07-05 11:46:57 -07:00
f9f1b8e25d
liblitedram: Consider 1s window is valid when indirectly seen before 0 (start at 0 and long enough).
2021-06-29 12:03:51 +02:00
8192ad335f
Merge pull request #958 from sergachev/master
...
soc/interconnect/axi: fix valid signal in connect_to_pads for axi lite
2021-06-28 17:37:29 +02:00
65babd6500
soc/interconnect/axi: fix valid signal in connect_to_pads for axi lite
2021-06-28 11:50:45 +02:00
4d959bbc81
Merge pull request #956 from developandplay/simplify-blackparrot-setup
...
Simplify blackparrot setup
2021-06-28 11:26:50 +02:00
35204225e8
Fix compile error when FST traces are enabled on macOS.
...
Compile options should be the same for all platforms.
2021-06-27 17:34:43 +03:00
9fd9eaea07
Move patch script to python-data
2021-06-27 01:31:05 +02:00
ac217d818f
Set environmental variables in python
2021-06-27 01:07:27 +02:00
e3f6d8349b
Use os methods to expand env vars
2021-06-26 16:30:54 +02:00
b787ee4411
Move systemverilog files to python-data
2021-06-26 15:45:48 +02:00
16b3e08c17
Copy config loader in python
2021-06-26 15:37:17 +02:00
23afca3de8
Merge pull request #953 from developandplay/blackparrot-32bit-csr
...
Blackparrot 32bit csr
2021-06-23 19:20:51 +02:00
edc4c85615
build/lattice/common: Add ECP5 Differential Output support.
2021-06-23 11:55:22 +02:00
adb71bde8c
Adjust wishbone adapter for 32bits
2021-06-22 23:37:24 +02:00
b795f848a2
Fixup blackparrot
2021-06-22 18:43:17 +02:00
c395a8068a
cores/prbs: Minor Cleanup and make sure to generate errors when RX is Idle.
2021-06-22 16:57:00 +02:00
2cd6224acf
clock/lattice_ecp5/ECP5PLL: Add expose_dpa method (Dynamic Phase Adjustment) and move code to it.
2021-06-22 12:07:39 +02:00
09a3ca6fd0
Merge pull request #949 from zyp/ecp5_dynamic_pll
...
cores/clock/ecp5: Add dynamic phase adjustment signals.
2021-06-22 12:04:20 +02:00
26df3fa2c4
Merge pull request #952 from smunaut/dfu
...
build/DFUProg: Allow to specify alt interface and to not reboot
2021-06-22 12:03:43 +02:00
3d81c9a437
build/lattice/LatticeProgrammer: pgrcmd always seems to return a non-zero value so disable check.
2021-06-22 11:59:42 +02:00
f381cdcd1a
build/GenericProgrammer: Add check parameter to make check optional.
2021-06-22 11:59:38 +02:00
38e46bb3d3
build/DFUProg: Allow to specify alt interface and to not reboot
...
Some targets have multiple alt settings for DFU for different zone
of the flash. Allowing to specify which one to flash and not
rebooting immediately allows to flash several of them at once.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2021-06-21 16:12:55 +02:00
d6f24f2f68
cores/uart/RS232ClkPhaseAccum: Avoid reset on phase signal, improve timings/resources on iCE40.
2021-06-20 14:33:25 +02:00
4c8184fbb6
cores/uart: Fix refactoring typo (tick is a 1-bit Signal), thanks @tnt.
2021-06-20 08:58:45 +02:00
b58c416a24
cores/clock/ecp5: Add dynamic phase adjustment signals.
2021-06-19 11:24:08 +02:00
e7d04a2d1b
Merge pull request #948 from developandplay/non-interactive
...
Expose non-interactive mode
2021-06-18 13:27:18 +02:00
7d2e19ac26
Enable non-interactive mode
2021-06-18 12:35:42 +02:00
fdb278838c
Merge pull request #881 from developandplay/patch-1
...
Add --non-interactive option to simulation
2021-06-18 10:40:19 +02:00
5205356d24
tools/litex_json2dts: Simplify Switches interrupt support (and make it similar to other interrupts).
2021-06-18 10:36:33 +02:00
291374e66f
Merge pull request #854 from mczerski/gpio_dts_irq
...
dts: gpio: interrupt controller definition for switches
2021-06-18 10:29:30 +02:00
98676162a3
VexRiscv-SMP: Review/Cleanup #906 .
2021-06-18 10:19:27 +02:00
58c533668c
Merge pull request #906 from rdolbeau/extra_config_and_dts
...
Configurable [ID]TLB for VexRiscv & improved DTS
2021-06-18 10:09:28 +02:00
8ce7c583e6
cores/spi: Add Manual CS Mode (to allow doing Bulk Xfers without external changes), also cleanup/simplify a bit CSR descriptions.
2021-06-18 10:07:01 +02:00
ac73474d66
CONTRIBUTORS: Update.
2021-06-17 23:23:06 +02:00
a4be067d91
tools: Add litex_contributors.py script to easily update CONTRIBUTORS file.
2021-06-17 23:04:28 +02:00
7179d88e8c
ram/lattice_nx: Add init parameter and rename method to add_init.
...
When init is not empty, call add_init automatically (similar to Memory).
2021-06-16 18:33:00 +02:00
869b5c24a8
Merge pull request #941 from danc86/nxlram-initval
...
soc/cores/ram: allow populating initial values in Nexus LRAM
2021-06-16 18:31:00 +02:00
b0e6851150
Merge pull request #942 from zyp/external_software_packages
...
Allow external software packages to be linked into the BIOS
2021-06-16 18:21:55 +02:00
aad64bbf9b
Merge pull request #943 from JosephBushagour/jbushagour_getargspec_fix
...
Replace deprecated inspect.getargspec with inspect.getfullargspec.
2021-06-16 14:59:39 +02:00
deda54a9ba
Merge pull request #945 from tcal-x/symbiflow-make
...
Force SymbiFlow 'make' to be non-parallel.
2021-06-16 14:57:36 +02:00
e59530ab50
Force SymbiFlow 'make' to be non-parallel.
...
Signed-off-by: Tim Callahan <tcal@google.com>
2021-06-15 14:49:28 -07:00
8a644c9086
soc/add_video_xy: Allow passing phy or phy's Endpoint.
2021-06-15 18:10:24 +02:00
62ea48940a
Replace deprecated inspect.getargspec with inspect.getfullargspec.
2021-06-15 08:03:11 -05:00
8d527a1f3f
soc/software/bios: Allow registering init functions.
2021-06-13 14:04:34 +02:00
Florent Kermarrec
George Hilliard
Yoshimasa Niwa
Ilia Sergachev
Vadzim Dambrouski
developandplay
Sylvain Munaut
Vegard Storheil Eriksen
Tim Callahan
Joey Bushagour