1fac6077fb
targets/de0nano: use CycloneIVPLL, remove 50MHz limitation.
2020-04-07 17:01:58 +02:00
5f629c203b
targets/vcu118: fix clk500 typo.
2020-04-07 13:53:22 +02:00
d7b9212044
.travis.yml: fix git clone error.
2020-04-07 12:22:02 +02:00
5e1da47cc4
setup.py: simplify, switch to Python3.6+ (using python_requires), remove version.
...
- Deprecate Python 3.5, switch to Python 3.6+.
- Remove which was not used or updated. We'll see to get this back when working on releases.
2020-04-07 12:01:45 +02:00
a7fbe0a724
colorlight_5a_75b: add SoC with regular UART (on J19).
2020-04-03 10:28:53 +02:00
19e5366ad1
targets/colorlight_5a_75b: update sys/sys_ps phases.
2020-03-31 18:18:45 +02:00
9ae8a0cc11
colorlight_5a_75b/v7.0: add spiflash pins.
2020-03-31 16:18:12 +02:00
ccfc021c1a
Merge pull request #61 from ilya-epifanov/ecp5-evn-programming
...
programming the ECP5-EVN flash through the OpenOCD JTAG-SPI proxy
2020-03-28 12:59:19 +01:00
8afc9a5b03
programming the ECP5-EVN flash through the OpenOCD JTAG-SPI proxy
2020-03-28 11:27:34 +01:00
89dd00d3a2
platforms/aller: rename pcie to pcie_x4 (for consistency with others platforms).
2020-03-27 13:01:36 +01:00
cc2ac08ab9
Merge pull request #60 from antmicro/zcu104-sodimm
...
zcu104: add fully working SO-DIMM config
2020-03-26 18:30:27 +01:00
d2edf54ab3
zcu104: add fully working SO-DIMM config
2020-03-26 16:37:11 +01:00
3b91e96c42
targets/add_constant: avoid specifying value when value is None (=default)
2020-03-26 09:47:22 +01:00
555bf6c4dc
targets/Ultrascale(+): enable USDDRPHY_DEBUG.
2020-03-26 09:17:09 +01:00
4053c02d7e
targets/orangecrab: add USB PLL for USB CDC with ValentyUSB.
2020-03-25 19:38:36 +01:00
85f38876c2
targets: update PCIe on Numato targets.
...
Should be compatible with software from: https://github.com/enjoy-digital/netv2 .
2020-03-25 11:53:52 +01:00
6e6b6dac55
platforms/orangecrab: add spisdcard pins.
2020-03-25 10:21:57 +01:00
87fd4dc059
platforms/minispartan6: add spisdcard pins.
2020-03-25 09:53:04 +01:00
24033e331c
targets: update SDRAM to use new GENSDRPHY and new ECP5PLL phase support.
2020-03-24 19:59:42 +01:00
92f793f9c5
platforms: remove versa_ecp3 (ECP3 no longer supported).
2020-03-24 19:58:12 +01:00
131733a2e6
Merge pull request #59 from gregdavill/OrangeCrab
...
OrangeCrab Board updates
2020-03-23 07:17:56 +01:00
fe2fa097fa
test_targets: revert orangecrab test build
2020-03-23 09:20:41 +10:30
eb35ec92ba
orangecrab: combine revisions in target
2020-03-23 09:20:01 +10:30
357aeac59d
test_targets: Update orangecrab platforms
2020-03-22 21:25:39 +10:30
159360da2c
orangecrab: Add r0.2 support
2020-03-22 21:04:07 +10:30
bf3c9dc9bf
orangecrab: Add sdram selection option
2020-03-22 20:41:12 +10:30
88d3f1d63e
orangecrab: r0.1 OrangeCrab fixes
2020-03-22 20:14:29 +10:30
78224b1e56
targets/colorlight_5a_75b: add SDRAM.
2020-03-21 22:11:47 +01:00
a95a4eed3f
targets/colorlight_5a_75b: switch to add_ethernet/add_etherbone methods.
2020-03-21 21:50:05 +01:00
7bba5caab0
targets/c10prefkit: remove keep attributes (no longer needed, added automatically).
2020-03-21 21:44:44 +01:00
6c31933e89
targets: switch to add_etherbone method.
2020-03-21 21:40:45 +01:00
159386e3d3
targets: always use sys_clk_freq on SDRAM modules.
2020-03-21 20:00:56 +01:00
3fb3ba18e8
targets: switch to add_ethernet method instead of EthernetSoC.
2020-03-21 18:29:52 +01:00
83e6fb29f8
targets: switch to SoCCore/add_sdram instead of SoCSDRAM.
2020-03-21 12:43:39 +01:00
33bf1d3ee2
Merge pull request #58 from gsomlo/gls-trellisboard-spisdcard
...
Move trellisboard target to SoCCore, add SPI-mode SDCard support
2020-03-20 19:07:00 +01:00
fb1cab857a
targets/arty: use new ISERDESE2 MEMORY mode.
2020-03-20 18:59:17 +01:00
f021c1de5f
targets/trellisboard: add '--with-spi-sdcard' build option
...
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-03-20 07:14:13 -04:00
69a78c8c66
targets/trellisboard: switch to SoCCore, use add_ethernet() method
...
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-03-19 18:09:37 -04:00
396b0383c8
platforms/trellisboard: fix "sdcard" pads, add "spisdcard" pads
...
Add support for SPI-mode SDCard interface. Also, add pull-up and
slew constraints to the standard sdcard interface.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-03-19 18:09:37 -04:00
d0d047dfa4
platforms/ulx3s: add spisdcard pins.
2020-03-19 15:14:05 +01:00
6ab13a0661
de10nano/MiSTer: rename SPI SD CARD pins to spisdcard and remove SPI SD Card integration from target.
2020-03-19 11:09:48 +01:00
db9d5489ec
Merge pull request #56 from rob-ng15/master
...
de10nano add in support for MiSTer secondary sd card
2020-03-19 11:07:40 +01:00
57bcadb5b4
platforms/nexys4ddr: add spisdcard pins.
2020-03-19 11:04:11 +01:00
f3d7f5880f
platforms/kcu105: fix pcie tx0 p/n swap.
2020-03-18 19:09:52 +01:00
bc6ef0bc48
Allow access to secondary sd card via hardware spi bitbanging
2020-03-18 12:13:37 +00:00
a6f80694cb
Add in support for secondary sd card via spi hardware bitbanging
2020-03-18 12:11:57 +00:00
a99d258411
targets/icebreaker: use simplified version closer to the others targets.
...
Add description of the board, link to the crowdsupply campaign and to the more complete example.
2020-03-13 09:43:43 +01:00
74a5ffb9ef
targets/Ultrascale+: use 500MHz IDELAYCTRL reference clock.
...
The minimum is 300MHz on Ultrascale+ vs 200MHz on Ultrascale.
2020-03-10 16:58:30 +01:00
e2a66090ee
targets/Ultrascale(+): simplify CRG using USIDELAYCTRL.
2020-03-10 16:55:22 +01:00
cf58550bba
targets/Ultrascale+: use USPDDRPHY.
2020-03-10 16:06:48 +01:00
Florent Kermarrec
Ilya Epifanov
Piotr Binkowski
Greg Davill
Gabriel Somlo
rob-ng15