33a0975dd7
litex_acorn_baseboard_mini: Allow configurable sys_clk_freq with Ethernet/Etherbone.
2024-02-27 12:38:08 +01:00
7bc03e5fbc
targets/litex_acorn_baseboard_mini: Make it similar to other targets and keep SoC + UART + DRAM + Ethernet.
2024-02-26 17:29:09 +01:00
aa34acc426
targets/digilent_arty: Allow --with-ethernet and --with-etherbone and remove --with-hybrid.
2024-02-26 15:56:58 +01:00
feae57e7fb
target/qmtech_kintex7_devboard: +X.
2024-02-26 15:41:09 +01:00
23313de1b4
targets: Add initial litex_acorn_baseboard_mini target from acorn_baseboard repository.
2024-02-26 12:25:15 +01:00
6d07eda3c0
targets/digilent_arty: Fix indent on with_usb.
2024-02-21 10:06:49 +01:00
68e0453677
targets/digilent_arty: Move USB integrated to BaseSoC.
2024-02-21 09:03:53 +01:00
8242ab3974
targets/digilent_arty: Add Ethernet/Etherbone Hybrid mode + USB-Host (through Machyne PMOD).
2024-02-20 19:44:10 +01:00
9c3f272f6e
platforms/lambdaconcept_ecpix5: Minor cleanup.
2024-02-09 12:20:12 +01:00
f7c7a5a7e5
Merge pull request #563 from smunaut/adi
...
Some minor updates to the ADI ADRV2CRR board
2024-02-06 16:33:53 +01:00
a6f8f0e696
Merge pull request #561 from ruurdk/qmtech
...
Add support for QMTech Kintex 7 Development board
2024-02-06 16:29:54 +01:00
24fc3d48a4
Merge pull request #560 from Johnsel/axau15_update
...
AXAU15: Updated FMC+ pinout
2024-02-06 16:28:36 +01:00
b3caabcca3
di_adrv2crr_fmc: Bump PCIe to 8 lanes
...
There used to be an issue with 8 lanes litepcie USP for that board
when it was first added, but it's been solved now, so might as well
use all the available lanes
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2024-02-05 11:43:02 +01:00
2264df8a0a
adi_adrv2crr_fmc: Speedgrade of the PLL is -2
...
Speedgrade of the chip was updated in a previous commit, but
I forgot to update the PLL too
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2024-02-05 11:42:14 +01:00
4d967e8387
add to boards list
2024-02-01 16:18:26 +01:00
66152390ba
Add support for QMTech Kintex 7 Development board
2024-02-01 16:16:01 +01:00
741082e5ee
Merge branch 'litex-hub:master' into axau15_update
2024-01-27 03:28:28 +01:00
721fa0b4b3
axau15: added more FMC+ pins and made some corrrections
2024-01-27 03:27:48 +01:00
39dc0b36a4
sipeed_tang_mega_138k: Fix build with ethernet and local/remote ip indent.
2024-01-22 13:20:07 +01:00
dbcd5bc3f5
Merge pull request #559 from racerxdl/master
...
sipeed_tang_mega_138k: Added PCIe reset and other pins from sipeed dock
2024-01-15 08:42:37 +01:00
261c61cf62
targets/sipeed_tang_nano_4k: Remove commited spiflash.o.
2024-01-14 11:24:18 +01:00
3438f74224
sipeed_tang_mega_138k: Added PCIe reset and other pins from sipeed documentation
2024-01-13 04:38:54 -03:00
926d54cb41
sipeed_tang_nano_4k: Switch to LiteX's UART and expose hyperram parameter.
2024-01-11 13:54:44 +01:00
688a020f35
sipeed_tang_meta_138k: Add gowin_ae350 CPU initial support.
...
./sipeed_tang_mega_138k.py --cpu-type=gowin_ae350 --build --flash
__ _ __ _ __
/ / (_) /____ | |/_/
/ /__/ / __/ -_)> <
/____/_/\__/\__/_/|_|
Build your hardware, easily!
(c) Copyright 2012-2024 Enjoy-Digital
(c) Copyright 2007-2015 M-Labs
BIOS built on Jan 11 2024 12:37:50
BIOS CRC passed (0efaefbe)
LiteX git sha1: e689aab1
--=============== SoC ==================--
CPU: Gowin AE350 @ 800MHz
BUS: WISHBONE 32-bit @ 4GiB
CSR: 32-bit data
ROM: 128.0KiB
SRAM: 8.0KiB
--============== Boot ==================--
Booting from serial...
Press Q or ESC to abort boot completely.
sL5DdSMmkekro
Timeout
No boot medium found
--============= Console ================--
litex> ident
Ident: LiteX SoC on Tang Mega 138K 2024-01-11 12:37:47
2024-01-11 13:17:05 +01:00
29143a89f8
platforms/sipeed_tang_mega_138k: adding some resources/connectors definition (SPI flash, Buttons, SDRAM connector)
2024-01-10 10:37:01 +01:00
52f9f0f107
Merge pull request #555 from machdyne/master
...
add support for minze board
2024-01-07 08:10:51 +01:00
52aeec00d7
sipeed_tang_nano_4k: Remove note since openFPGALoader regression has been fixed.
2024-01-04 18:29:31 +01:00
c0a98a6b9d
targets/sipeed_tang_nano_4k: Directly integrate flashing of EMCU flash.
...
Ex to build/flash bitstream + firmware with EMCU:
./sipeed_tang_nano_4k.py --cpu-type=gowin_emcu --build --flash
2024-01-03 13:07:44 +01:00
55ade3b2df
sipeed_tang_nano_4k: Minor cleanup/add comments.
2024-01-02 13:42:56 +01:00
e585d786e9
setup.py: Add classifiers.
2024-01-01 15:31:42 +01:00
fd59d954ba
add support for minze board
2023-12-29 06:01:59 +01:00
982038508e
alinx_axau15/PCIe: Switch to Gen3/128-bit for now (configuration used on others Ultrascale+ Gen3 X4 boards).
2023-12-28 19:56:52 +01:00
e229d1a0b6
alinx_axau15: First review/cleanup pass and fix missing INTERNAL_VREF on bank 66.
2023-12-28 19:48:50 +01:00
b340d9e5e7
Merge pull request #550 from Johnsel/master
...
alinx_axau15: Added new Alinx Artix US+ board
2023-12-28 19:24:14 +01:00
429f9ab20b
setup.py: Bump to 2023.12 to prepare release.
2023-12-25 15:35:26 +01:00
2e77a18d71
Merge pull request #553 from machdyne/master
...
add support for mozart ml1
2023-12-20 15:23:07 +01:00
754b6d2427
add support for mozart ml1
2023-12-19 22:18:21 +01:00
4cfa4defd2
setup.py: Switch minimum Python version to 3.7 (To allow more than 255 arguments in functions).
2023-12-19 10:30:04 +01:00
e9dac1e460
setup.py: Improve indentation and specify UTF-8 encoding for long_description/README.md.
2023-12-19 10:17:34 +01:00
e8bc9fa81d
targets/sipeed_tang_nano_4k: adding description to write Gowin EMCU firmware
2023-12-14 13:24:57 +01:00
4166a94a1f
prog/openocd_ecpix5.cfg: refresh/fix
2023-12-13 18:34:02 +01:00
2c2b3e318a
Fixed pinout and first steps adding PCIe support
2023-12-12 15:44:51 +01:00
7c64727c0d
Merge pull request #551 from litex-hub/dependabot/github_actions/actions/setup-python-5
...
build(deps): bump actions/setup-python from 4 to 5
2023-12-12 09:07:16 +01:00
89ba8be5b2
build(deps): bump actions/setup-python from 4 to 5
...
Bumps [actions/setup-python](https://github.com/actions/setup-python ) from 4 to 5.
- [Release notes](https://github.com/actions/setup-python/releases )
- [Commits](https://github.com/actions/setup-python/compare/v4...v5 )
---
updated-dependencies:
- dependency-name: actions/setup-python
dependency-type: direct:production
update-type: version-update:semver-major
...
Signed-off-by: dependabot[bot] <support@github.com>
2023-12-11 11:56:51 +00:00
ab60d91138
alinx_axau15: Fixed minor clock and sdcard reference issues
2023-12-05 21:14:57 +01:00
7be052911b
alinx_axau15: Added new Alinx Artix US+ board
2023-12-05 20:45:57 +01:00
ba86121ea9
platforms/efinix_trion_t120_bga576_dev_kit: P2/P3 description
2023-11-14 19:27:59 +01:00
6333fbe724
targets/siglent_sds1104xe: Update with new LiteX Ethernet/Etherbone integration.
2023-11-13 09:02:09 +01:00
1969b4f6d3
siglent_sds1104xe: Update Ethernet/Etherbone integration.
2023-11-10 18:58:42 +01:00
42f93f2d7c
Merge pull request #548 from trabucayre/tangMega138k_p2
...
Tang mega138k p2
2023-11-10 15:45:53 +01:00
Florent Kermarrec
Sylvain Munaut
Ruurd Keizer
John Simons
Lucas Teske
Gwenhael Goavec-Merou
inc
dependabot[bot]
Gwenhael Goavec-Merou