158fbe49ac
sdram/phy/s6ddrphy: rename S6DDRPHY to S6HalfRateDDRPHY and use ORed wrdata_en/rddata_en (the controller already manages that)
2015-08-22 11:47:26 +02:00
4acab79987
sdram/module: cleanup indent
2015-08-20 22:15:06 +02:00
63538a7d04
litecores: add -Ob option to make.py (allow to build with yosys for example)
2015-08-19 01:17:37 +02:00
3d3cd128d8
liteeth/phy: only use clk_freq for LiteEthPHYGMIIMII in autodetect
2015-08-19 01:17:35 +02:00
3cf46671e9
liteeth/phy: rename rgmii to s6rgmii since specific to Spartan6
...
Also remove autodetection support for RGMII. For it to work we would need to pass the device we are building for.
2015-08-05 10:33:08 +02:00
4b8d9b67f3
liteeth: add rgmii phy
2015-08-05 00:50:55 +02:00
c03ef526eb
sdram/phy/s6ddrphy: add DDR3 support
2015-08-04 12:29:42 +02:00
52fba05e26
sdram/phy/initsequence: add burst chop 4 (BC4) for DDR3
...
This is needed for half rate controllers with burst length of 4.
For best efficiency quarter rate controllers should be used.
2015-08-04 11:19:20 +02:00
4b6bd43d8e
Enable ror, ffl1 and addc for OR1K.
2015-07-30 10:55:01 +03:00
a4e14f1058
Don't build base libraries and BIOS with -fPIC after all.
2015-07-29 12:09:05 +03:00
b7aff65ca9
mor1kx: enable ADDC, CMOV and FFL1 instructions
2015-07-29 00:08:21 +08:00
f2eff4d10e
soc: increase default BIOS size
2015-07-28 22:36:42 +08:00
c8ffd0c9ee
Switch to -fPIC.
...
Using -fPIC for everything allows to link the MiSoC static libraries
both into static images such as the BIOS as well as
into shared libraries.
2015-07-26 16:06:48 +03:00
8d1c555e36
misoclib/com/uart: remove irq condition parameters and use "non-full" for tx irq, "non-empty" for rx irq.
...
An optimal solution for both sync and async mode is not easy to implement, it would requires moving CDC out of UART module and handling in the PHY with AsyncFIFO or minimal depth.
For now use the solution that works for both cases. We'll try to optimize that if we have performance issues.
2015-07-25 00:25:09 +02:00
ce11b30140
misoclib: integrate mxcrg.py in mlabs_video target, remove others directory
...
we should also get rid of mxcrg.v (similar to what is done on papilio or pipstrello)
2015-07-24 23:16:45 +02:00
b75b93df43
misoclib/com/uart: replace revered Migen FIFO function with specific _get_uart_fifo function for our use case.
2015-07-24 14:05:54 +02:00
0a115f609e
litepcie/frontend/dma: group loop index and count in loop_status register (avoid 2 register reads)
2015-07-24 13:52:57 +02:00
d73d75007e
misoclib/com/uart: cleanup and add irq condition parameters
...
- reintroduce RX/TX split (ease comprehension)
- use FIFO wrapper function from Migen.
- add tx_irq_condition and rx_irq_condition
2015-07-24 12:57:42 +02:00
b1ea3340f3
litepcie/frontend/dma: add loop counter (useful to detect missed interrupts)
2015-07-22 22:55:11 +02:00
dfc207aacb
litepcie: use data instead of dat in dma_layout (allow use of migen.actorlib.packet modules on dma dataflow)
2015-07-22 21:44:53 +02:00
40740d3ddc
litepcie: use optional platform.misoc_path to add litepcie phy wrapper verilog files
...
We should eventually try to use python package_data or data_file for that.
2015-07-22 18:09:04 +02:00
a501d7c52d
uart: support async phys
2015-07-19 23:37:00 +02:00
4dca66b23d
misoclib/video/dvisampler: add fifo_depth parameter
2015-07-13 11:03:33 +02:00
e6da1d16b2
wishbone2lasmi: fix "READ_DATA" state
2015-07-09 10:40:32 +02:00
0545d49294
liteeth/core: add with_icmp parameter
2015-07-06 21:31:20 +02:00
e011f9378f
use sets for leave_out
2015-07-05 22:49:23 +02:00
c100ef6406
liteeth/core/mac: adapt depth on AsyncFIFOs according to phy (reduce ressource usage with MII phy)
2015-07-05 22:45:53 +02:00
c1ca928ec2
liteeth: small logic optimizations on mac (eases timings on spartan6)
2015-07-05 12:31:52 +02:00
31a447154d
soc: support constants without value
2015-06-28 21:35:37 +02:00
04c64eb1d8
litesata/example_designs: fix core generation (RAID introduced some changes on the PHY)
2015-06-26 00:20:58 +02:00
52e6bf6987
litesata/test: Add missing dependency on scrambler in bist_tb
2015-06-26 01:20:25 +02:00
ffb6081720
litesata/example_designs: Add missing clock in phy instantiation
2015-06-26 01:20:25 +02:00
125432b5b6
liteeth/example_designs: use new Keep SynthesisDirective
2015-06-23 16:15:28 +02:00
01c5051866
liteeth/software: fix wishbone bridge
2015-06-23 01:48:45 +02:00
369cf4c4d7
liteeth/example_designs: add false path between clock domains (speed up implementation) and use automatic PHY detection
2015-06-23 01:08:49 +02:00
5c939b85ef
liteeth/core/arp: fix table timer (wait_timer adaptation issue)
2015-06-23 00:25:26 +02:00
a3c0e5c4d9
liteeth/core/arp: fix missing MAC address in ARP reply
2015-06-22 23:15:00 +02:00
f44956bfca
soc/sdram: add L2_SIZE constant and avoid declaring an empty flush_l2_cache function when L2_SIZE is not defined
2015-06-19 08:39:37 +02:00
7c2d0fa641
indentation
2015-06-17 08:32:17 -06:00
c0bc94ca1c
soc/sdram: add capability to share L2 cache in multi-CPU SoCs
2015-06-17 15:48:45 +02:00
3b9f287bab
sdram: use wishbone cache as L2 cache and add optional L2 cache to Minicon
2015-06-17 15:30:30 +02:00
a1f7ecc8c5
litesata: use 200MHz clock and SATA3 (6.0Gb/s) on all example designs: working :)
2015-06-10 12:15:59 +02:00
571ce5791a
litesata/phy/k7: apply AR# 63869 to keep CDR in hold during SATA link initialization
...
self.rxelecidle is already filtered so the "20 USRCLK cycles before setting RXCDRHOLD to 1'b0" are respected.
2015-06-10 12:14:48 +02:00
1bb2580779
sdram: use new Migen Converter in Minicon frontend and small cleanup
2015-06-02 19:37:08 +02:00
f96a856c97
sdram/phy: fix simphy memory usage
2015-06-02 19:33:09 +02:00
f40140dba5
sdram: refactor minicon and fix issues with DDRx memories
...
- simplify code
- fix AddressSlicer
- manage write latency and write to precharge timings
- add odt/reset_n signals
2015-05-29 12:31:56 +02:00
d50bb8c55e
litesata: more doc fixes
2015-05-26 14:13:13 +08:00
1e47cfce2b
Merge branch 'master' of https://github.com/m-labs/misoc
...
Conflicts:
misoclib/mem/litesata/doc/source/docs/frontend/index.rst
2015-05-26 13:57:26 +08:00
a9da892b57
litesata: doc fixes
2015-05-26 13:54:31 +08:00
989d8a7c29
liteata: fix spelling & mistakes in doc
2015-05-26 07:37:09 +02:00
Florent Kermarrec
whitequark
Sebastien Bourdeauducq
Robert Jordens
Olof Kindgren