George Hilliard
8954041a93
clock/lattice_ecp5/ECP5PLL: Only consider non-dpa clocks as feedback
...
Dynamically adjusting the phase of a feedback will cause it to unlock.
The phase adjust ports are shared by all the outputs, so there is no
technical way to prevent this. Allow the user to indicate that they
will not adjust a clock when requesting an output by setting
uses_dpa=False, and only consider those that the user has promised not
to use.
2021-07-08 08:14:14 -05:00
Florent Kermarrec
f6b2135cc9
test/test_timer: Update.
2021-05-27 19:37:51 +02:00
Florent Kermarrec
675349055b
inteconnect/stream: Increase io_lcm size when io_lcm/i_dw or io_lcm/o_dw < 2.
...
Allow supporting all cases.
2021-03-18 13:47:10 +01:00
Blake Smith
98b75d8671
Add initial core test for Timer
2021-01-21 21:37:41 -06:00
Florent Kermarrec
f31f9a20f0
boards: remove and switch to litex_boards.
...
Keeping board definition files directly in LiteX is no longer useful since we are already relying on board
definitions files from LiteX-Boards (https://github.com/litex-hub/litex-boards ) in various benches/projects
and having definitions files directly in LiteX creates confusion/additional work.
For projects using board definition files from LiteX, the litex.boards import can just be replaced with litex_boards:
from litex.boards.platforms import kc705
from litex_boards.platforms import kc705
2021-01-04 14:09:35 +01:00
Florent Kermarrec
6771ed0796
ci: migrate from Travis CI to Github Actions.
2020-11-24 15:55:49 +01:00
Florent Kermarrec
cecb36d608
test/test_clock: update with new supported devices.
2020-11-09 10:37:20 +01:00
Florent Kermarrec
e91ec2ed83
soc/cores/code_8b10b: add StreamEncoder/Decoder (to be used with LiteX's streams).
...
With improvements to handle backpressure on non-continous streams.
2020-10-21 09:29:21 +02:00
Florent Kermarrec
305092c7b8
test/test_icap: update.
2020-10-07 12:36:08 +02:00
Florent Kermarrec
f7b6dd05ae
cores/clock: add initial Xilinx Ultrascale Plus PLL/MMCM/IDELAYCTRL support.
2020-09-03 18:58:10 +02:00
Florent Kermarrec
77ae243310
test: add SPDX License identifier to header and specify file is part of LiteX.
2020-08-23 15:40:21 +02:00
Florent Kermarrec
a5d0a340c3
test: specify wishbone adr_width on AXI(Lite)<-->Wishbone tests and remove debug traces.
2020-08-04 09:39:23 +02:00
Jędrzej Boczar
e78d950a31
soc/interconnect/axi: add AXILite -> AXI converter
2020-07-30 13:50:34 +02:00
Jędrzej Boczar
879e6ffe73
soc/interconnect/axi: add basic AXI Lite up-converter
2020-07-24 13:47:18 +02:00
Jędrzej Boczar
32160e615f
soc/interconnect/axi: separate AXI Lite converter channels
2020-07-24 09:25:57 +02:00
Jędrzej Boczar
a9d8b81385
test/axi: move all AXI Lite tests to separate file
2020-07-22 17:16:33 +02:00
Jędrzej Boczar
8ae501c391
test/axi: add crossbar stress tests
2020-07-22 17:16:33 +02:00
Jędrzej Boczar
32d9e212c5
soc/interconnect/axi: improve Timeout module and test it with shared interconnect
2020-07-22 17:16:33 +02:00
Jędrzej Boczar
2cab7fbf0f
test/axi: add shared AXI Lite interconnect tests
2020-07-22 17:16:33 +02:00
Jędrzej Boczar
3a08b21d44
soc/interconnect/axi: implement AXI Lite decoder
2020-07-22 17:16:33 +02:00
Jędrzej Boczar
214cfdcaeb
soc/interconnect/axi: lock AXILiteArbiter until all requests have been responded to
2020-07-22 17:16:33 +02:00
Jędrzej Boczar
baf23c9c9b
test/test_axi: add AXI Lite interconnect arbiter tests
2020-07-22 17:16:29 +02:00
Jędrzej Boczar
f47ccdae99
soc/interconnect/axi: point-to-point interconnect and timeout module with tests
2020-07-22 17:16:12 +02:00
Florent Kermarrec
47ce15b431
interconnect/wishbone: add minimal UpConverter.
2020-07-21 19:35:14 +02:00
Florent Kermarrec
100aa5a4ca
soc/cores/spi/SPIMaster: rewrite/simplify.
...
- Make sure MOSI is latched on start, MISO is stable during Xfer (last value).
- Allow clk_divider down to 2.
- improve test errors reporting with hex() on AssertEqual.
2020-07-20 10:44:18 +02:00
Jędrzej Boczar
93bcc94b53
soc/interconnect/axi: implement AXILite down-converter
2020-07-16 17:02:49 +02:00
Jędrzej Boczar
78a631f392
test/axi: add AXILite2CSR and AXILiteSRAM tests
2020-07-15 12:40:39 +02:00
Florent Kermarrec
5d202ddb97
test: update.
2020-06-02 13:51:48 +02:00
Florent Kermarrec
80ec5eca76
boards/arty: remove specific arty_symbiflow platform and adapt target to use standard platform.
2020-06-02 12:18:12 +02:00
Mariusz Glebocki
7434376c07
test/test_targets: add arty_symbiflow
...
Signed-off-by: Mariusz Glebocki <mglebocki@antmicro.com>
2020-06-01 21:41:56 +02:00
Florent Kermarrec
3d06dc028c
test/test_targets: update build_test.
2020-05-22 08:42:02 +02:00
Pawel Sagan
ce49990084
Extend I2S capabilities
...
This commit:
* adds the support for I2S standard mode,
* extends I2S left justified mode,
* allows to configure sample size for tx/rx in 1-32 bits range,
* implements I2S master mode,
* allows to concatenate channels or used the padded mode.
This required to rework the FSM.
2020-05-20 14:31:51 +02:00
Florent Kermarrec
6f8f0d2346
litex_setup: add litehyperbus and remove hyperbus core/test.
2020-05-19 15:49:25 +02:00
Florent Kermarrec
9f941138d2
test/test_targets: workaround to fix travis.
2020-05-13 11:04:40 +02:00
Florent Kermarrec
98d1b45157
platforms/targets: fix CI.
2020-05-05 15:55:09 +02:00
Florent Kermarrec
0b3c4b50fa
soc/cores/spi: add optional aligned mode.
...
In aligned mode, MOSI and MISO bits are located on the LSBs and first transmitted MOSI bit is length - 1 bit.
2020-04-22 13:15:51 +02:00
Florent Kermarrec
4fe31f0760
cores: add External Memory Interface (EMIF) Wishbone bridge.
...
Useful to interface Processors/DSPs with LiteX. EMIF is generally used on Texas Instrument DSPs.
2020-04-12 16:34:33 +02:00
Florent Kermarrec
383fcd36d6
soc/cores/clock: add CycloneVPLL.
2020-04-07 17:24:12 +02:00
Florent Kermarrec
0f17547c5b
soc/cores/clock: add initial AlteraClocking/CycloneIV support.
2020-04-07 16:59:53 +02:00
Florent Kermarrec
c154d8d2fc
test/test_targets: remove versa_ecp3.
2020-03-25 08:47:43 +01:00
Florent Kermarrec
f03d862c06
targets: switch to add_ethernet method instead of EthernetSoC.
2020-03-20 23:46:15 +01:00
Florent Kermarrec
eb9f54b2bc
test: add initial (minimal) test for clock abstraction modules.
...
Also fix divclk_divide_range on S6DCM.
2020-03-13 12:38:23 +01:00
Florent Kermarrec
54fb3a61cd
test/test_targets: use uart-name=stub.
2020-02-29 11:07:10 +01:00
Florent Kermarrec
1d70ef6958
soc/cores/spi_opi: cleanup, rename to S7SPIOPI (since 7-Series specific for now)
2020-02-06 17:58:01 +01:00
Florent Kermarrec
f58e8188b7
soc/cores/i2s: cleanup pass, rename to S7I2SSlave (since 7-Series specific for now), rename fifodepth to fifo_depth for consistency with others cores.
2020-02-06 17:00:04 +01:00
Florent Kermarrec
f3f9808d1f
interconnect/stream: add PipeValid and PipeWait to cut timing paths.
2020-01-29 18:27:29 +01:00
Florent Kermarrec
7b92a17c6e
test/test_targets: limit max_sdram_size to 1GB
2020-01-17 13:24:45 +01:00
Florent Kermarrec
68e225fb45
test/test_targets: update
2020-01-15 13:09:03 +01:00
Florent Kermarrec
04017519c8
soc/interconnect/axi: add Wishbone2AXILite
2019-11-20 12:32:22 +01:00
Florent Kermarrec
4b073a440a
test/test_axi: cosmetic
2019-11-20 11:22:39 +01:00