Revert to treating SDRAM_DFII_PIX_[RD|WR]DATA CSRs as arrays
of bytes, but use the new uintX_t array accessors for improved
legibility, and to avoid unnecessary byteswapping.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
Implement CSR accessors for all standard integer types and
combinations of subregister alignments (32 or 64 bit) and
sizes (i.e., csr_data_width 8, 16, or 32).
Rename accessors to better reflect the size of the register
being accessed, and correspondingly update the generation
of "csr.h" in "export.py".
Additionally, provide read/write accessors that superimpose arrays
of standard unsigned C types over a CSR register (which may itself
be spread across multiple subregisters).
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
A bridged/crossover UART can now just be created by:
- passing uart_name="stream" to SoCCore/SoCSDRAM.
- adding a crossover UART core to the design:
# UART Crossover (over Wishbone Bridge
from litex.soc.cores.uart import UART
self.submodules.uart_xover = UART(tx_fifo_depth=2, rx_fifo_depth=2)
self.add_csr("uart_xover")
self.comb += self.uart.connect(self.uart_xover)
This version of the UART adds a second, compatible UART after
the first. This maintians software compatibility, and allows a
program running on the other side of the litex bridge to act as
a terminal emulator by manually reading and writing the second
UART.
Signed-off-by: Sean Cross <sean@xobs.io>
For the "P" side of the analog channels, actually, connecting
a digital line to them has "no meaning". The docs say that
either you connect an analog pin to a pad, or vivado "ties it off
appropriately". I wish it were the case that tying a pin to 0 or 1
would actually connect it to a power or ground, because it means
that even in unipolar mode you have to burn two pins to break out
the signal of interest *and* the ground reference analog pad
(I thought I could just connect it to "0" and the pin would be
grounded, but that doesn't happen -- it's just ignored if it's
not wired to a pad).
For the pad specifier, is it OK to leave it with an optional
argument of analog_pads=None? I tried assigning to the
self.analog property after instantiation, but this doesn't
seem to work, the default values are preferred. It looks like
if you don't want to do the analog_pads= optional argument
the other way to do it would be to add code on the instiating
module that tampers with the properties of the instance directly,
but I think that's sort of ugly.
Also, I noticed you stripped out the layout specifier for
the analog_pads. I thought it would be nice to provide that
in the file, so the caller doesn't have to infer what the
pad layout is by reading the code...what's the motivation for
removing that?
Florent Kermarrec
sadullah
Gabriel Somlo
Sean Cross
Arnaud Durand
Greg Davill
Konrad Beckmann
bunnie