Commit Graph

59 Commits

Author SHA1 Message Date
Sebastien Bourdeauducq ffe4bff396 dvisampler: use hard differential phase detector 2013-09-14 17:14:20 +02:00
Sebastien Bourdeauducq 8bc1620f2d dvisampler: disable EDID when HPD_EN is low 2013-09-13 23:43:28 +02:00
Sebastien Bourdeauducq d0edb7e2b8 dvisampler: reset PLL at startup 2013-09-08 12:55:26 +02:00
Sebastien Bourdeauducq dba6189e38 dvisampler: add HPD registers 2013-09-07 22:40:03 +02:00
Sebastien Bourdeauducq bf325594ee Use RenameClockDomains decorator instead of add_submodule 2013-07-26 15:42:44 +02:00
Sebastien Bourdeauducq 9d9270b5cd dvisampler: report FIFO overflow 2013-07-10 19:55:36 +02:00
Sebastien Bourdeauducq eff7882721 dvisampler: support differential input 2013-07-04 19:18:24 +02:00
Sebastien Bourdeauducq 35f4ddf9f1 dvisampler/edid: add nonstandard 1024x768 @ 30Hz mode 2013-06-25 22:47:54 +02:00
Sebastien Bourdeauducq f3e2f85dfa Use new FSM API 2013-06-25 22:25:10 +02:00
Sebastien Bourdeauducq 93efc7297e Revert "dvisampler/dma: buffer full memory words"
This reverts commit 1c8ef0fe3e.
2013-06-25 19:14:13 +02:00
Sebastien Bourdeauducq 1c8ef0fe3e dvisampler/dma: buffer full memory words 2013-06-11 18:15:16 +02:00
Sebastien Bourdeauducq 91d7b656a9 Switch to LASMI, bug pandemonium 2013-06-11 14:18:16 +02:00
Sebastien Bourdeauducq 084aa64a2a dvisampler/clocking: remove DCM_CLKGEN 2013-05-30 21:38:45 +02:00
Sebastien Bourdeauducq fb3e61230b Use new memory port API 2013-05-28 15:56:14 +02:00
Sebastien Bourdeauducq 611c4192b1 Use migen.fhdl.std 2013-05-22 17:10:13 +02:00
Sebastien Bourdeauducq fb6cd481f0 dvisampler: report the word error rate 2013-05-16 22:38:55 +02:00
Sebastien Bourdeauducq 534dec62eb First video mixing working (hacky) 2013-05-12 15:58:08 +02:00
Sebastien Bourdeauducq e96b027dee Framebuffer mixing 2013-05-10 21:03:55 +02:00
Sebastien Bourdeauducq 06064d33aa dvisampler/dma: better 8:8:8 -> 10:10:10 conversion 2013-05-09 11:27:24 +02:00
Sebastien Bourdeauducq fe87221d2b dvisampler/dma: reverse slot allocation order 2013-05-09 10:51:50 +02:00
Sebastien Bourdeauducq 2df4ff0ad9 dvisampler/dma: fix interrupt generation 2013-05-09 10:51:34 +02:00
Sebastien Bourdeauducq d685ed21fc dvisampler/dma: bugfixes 2013-05-08 22:50:40 +02:00
Sebastien Bourdeauducq 29efa85dec dvisampler: new DMA engine (buggy) 2013-05-08 22:31:01 +02:00
Sebastien Bourdeauducq e2d15b169a dvisampler: mostly working, very basic and slightly buggy DMA 2013-05-06 09:58:12 +02:00
Sebastien Bourdeauducq d05f3d22e0 chansync: bugfix 2013-05-05 15:07:57 +02:00
Sebastien Bourdeauducq d175e01876 dvisampler: connect sync polarity detection 2013-05-05 12:58:53 +02:00
Sebastien Bourdeauducq cb008a061c dvisampler/chansync: fix FIFO width 2013-05-05 12:58:24 +02:00
Sebastien Bourdeauducq ea20b74ed1 dvisampler/resdetection: use DE instead of hsync 2013-05-05 11:54:36 +02:00
Sebastien Bourdeauducq e3e1dcd547 dvisampler: add sync polarity detection module (thanks Lars for suggestions) 2013-05-05 11:53:38 +02:00
Sebastien Bourdeauducq 71e3bba228 dvisampler/decoding: hold C when DE=1 2013-05-05 11:51:48 +02:00
Sebastien Bourdeauducq 4259699d78 dvisampler: add RawDVISampler 2013-05-04 20:40:21 +02:00
Sebastien Bourdeauducq 63073319b0 dvisampler/datacapture: swap bit pairs 2013-05-04 20:38:50 +02:00
Sebastien Bourdeauducq 43ac5c8471 Remove undriven reset signals 2013-04-25 20:19:49 +02:00
Sebastien Bourdeauducq b018fcedc4 dvisampler/chansync: set synced to 0 when control tokens do not arrive at the same time 2013-04-16 22:21:03 +02:00
Sebastien Bourdeauducq 0d21711c1b dvisampler/chansync: use Record.raw_bits() 2013-04-14 17:06:29 +02:00
Sebastien Bourdeauducq 8914969760 dvisampler/clocking: insert DCM_CLKGEN before PLL 2013-04-14 16:53:19 +02:00
Werner Almesberger 7a6e56492c edid.py: sample SCL only every 64 clock cycles, to avoid bouncing
Possibly due to SCL rising fairly slowly (in the 0.5-1 us range),
bouncing has been observed while crossing the "forbidden" region
between Vil(max) and Vih(min).

By lowering the sample rate from once per system clock to once
every 64 clock cycles, we make sure we sample at most once during
the bounce interval and thus never see a false edge. (Although we
may see a rising edge one sample time late, which is perfectly
harmless.)
2013-04-12 22:48:46 +02:00
Sebastien Bourdeauducq 4f4f260e76 Convert to new CSR API 2013-03-30 17:28:15 +01:00
Sebastien Bourdeauducq 1e860c7472 Use new Mibuild generic_platform API 2013-03-26 17:57:17 +01:00
Sebastien Bourdeauducq 1333367de8 dvisampler: add resolution detection 2013-03-24 00:45:29 +01:00
Sebastien Bourdeauducq ee5bfd4d3d dvisampler/charsync: report position 2013-03-24 00:44:50 +01:00
Sebastien Bourdeauducq 99f9ffa7e8 dvisampler/decoding: set C to 0 during data 2013-03-24 00:44:19 +01:00
Sebastien Bourdeauducq fb9a2788e8 dvisampler/charsync: fix found_control signal 2013-03-24 00:43:22 +01:00
Sebastien Bourdeauducq e06585d9fe dvisampler: clean up EDID data 2013-03-23 13:48:40 +01:00
Sebastien Bourdeauducq 34b8388b45 dvisampler: decode before channel sync 2013-03-22 23:49:25 +01:00
Sebastien Bourdeauducq 037625886d dvisampler: decoding 2013-03-22 21:28:17 +01:00
Sebastien Bourdeauducq d65941d6cc dvisampler: channel synchronization 2013-03-22 18:37:10 +01:00
Sebastien Bourdeauducq 515cdb2bd8 dvisampler: character synchronization 2013-03-21 22:56:13 +01:00
Sebastien Bourdeauducq 7c4ca4fd66 dvisampler/datacapture: deserialize to 10 bits 2013-03-21 19:06:15 +01:00
Sebastien Bourdeauducq fa2331e084 dvisampler/clocking: generate pix reset 2013-03-21 19:02:04 +01:00