enjoy-digital
|
11dfe225fa
|
Merge pull request #356 from fjullien/add_mipi_tx
efinix: add MIPI TX to platform Ti60
|
2022-02-25 16:53:11 +01:00 |
Franck Jullien
|
c54e92c47d
|
efinix: add MIPI TX to platform Ti60
|
2022-02-25 15:15:14 +01:00 |
|
Florent Kermarrec
|
1623ba5942
|
targets/stlv7325: Reduce sys_clk_freq to 100MHz.
See https://github.com/enjoy-digital/litedram/issues/285.
|
2022-02-25 09:04:07 +01:00 |
|
Florent Kermarrec
|
872113e1cc
|
stlv7325: Add SDCard support.
|
2022-02-24 18:02:43 +01:00 |
|
Florent Kermarrec
|
a08f346d90
|
stlv7325: Add Etherbone support (untested).
|
2022-02-24 17:43:53 +01:00 |
|
Florent Kermarrec
|
b1550f006a
|
stlv3225: Minor Review/Cleanup, switch to JTAG HS2 programmer.
|
2022-02-24 17:17:08 +01:00 |
Andrew Gillham
|
174d958ca7
|
Initial support for STLV7325 Kintex-7 board.
|
2022-02-23 18:28:55 +01:00 |
|
enjoy-digital
|
6661947d96
|
Merge pull request #354 from madscientist159/master
Add initial support for RCS Arctic Tern boards
|
2022-02-23 18:06:08 +01:00 |
|
Florent Kermarrec
|
1717af68ac
|
targets/sqrl_acorn/ddr3: Disable write_latency_calibration.
Introduce some memtest failures on some boards.
|
2022-02-23 10:38:43 +01:00 |
|
enjoy-digital
|
16b9e100ba
|
Merge pull request #353 from sergachev/zcu216
Add Xilinx ZCU216 support
|
2022-02-22 18:57:31 +01:00 |
Raptor Engineering Development Team
|
ae4b3c0938
|
Add initial support for RCS Arctic Tern boards
|
2022-02-21 20:04:51 -06:00 |
Ilia Sergachev
|
85397818d9
|
add Xilinx ZCU216 support
|
2022-02-21 19:14:13 +01:00 |
|
Florent Kermarrec
|
7d84e6e863
|
efinix_titanium_ti60_t225: Add SPI/Native SDCard support.
Both modes working with 8559b88ad8.
|
2022-02-21 10:35:06 +01:00 |
|
Florent Kermarrec
|
df36cdbcc9
|
siglent_sds1104xe: Switch back to native DRAM width (now possible with Nax).
|
2022-02-18 11:47:08 +01:00 |
|
Florent Kermarrec
|
d85f88f42a
|
siglent_sds1104xe: Reduce DRAM's width to 16-bit for now (to use NaxRiscv).
|
2022-02-16 17:59:40 +01:00 |
|
Florent Kermarrec
|
08a79fa3ac
|
lattice_ecp5_vip: Minor cleanups, fix CI.
|
2022-02-15 10:58:38 +01:00 |
|
enjoy-digital
|
30afe26669
|
Merge pull request #348 from hubmartin/ecp5-vip
Draft: Add Lattice ECP5 VIP board + HDMI output board support
|
2022-02-15 08:53:57 +01:00 |
|
enjoy-digital
|
2b1dac0f96
|
Merge pull request #350 from trabucayre/axu2cga_software
Axu2cga software
|
2022-02-15 08:21:50 +01:00 |
|
enjoy-digital
|
896884dd21
|
Merge branch 'master' into axu2cga_software
|
2022-02-15 08:21:29 +01:00 |
|
enjoy-digital
|
6bbf8c8268
|
Merge pull request #351 from sergachev/litex_baseboard_openocd
add openocd config for litex acorn baseboard
|
2022-02-15 08:11:41 +01:00 |
|
Florent Kermarrec
|
3f58df9974
|
platforms/targets: Fix typos.
|
2022-02-14 17:26:46 +01:00 |
|
Florent Kermarrec
|
b53b79821e
|
platforms: Expose toolchain parameter on all platforms to ease switching to alternative/open-source toolchains.
|
2022-02-14 11:35:18 +01:00 |
|
Florent Kermarrec
|
12b91eccdc
|
digilent_arty: Remove yosys+nextpnr INTERNAL_VREF constraint skip (now directly done in LiteX).
|
2022-02-14 10:45:29 +01:00 |
|
Ilia Sergachev
|
5cd1d7eaec
|
add openocd config for litex acorn baseboard
|
2022-02-13 16:44:40 +01:00 |
Gwenhael Goavec-Merou
|
5eca41ac73
|
targets/alinx_axu2cga: adding PS software support (inspired by xilinx_kv260)
|
2022-02-12 18:24:01 +01:00 |
|
Gwenhael Goavec-Merou
|
50654f1b7b
|
platforms/alinx_axu2cga: add zynqmp PS configuration params
|
2022-02-12 18:19:55 +01:00 |
|
Gwenhael Goavec-Merou
|
d672d9a9b1
|
targets: s/alinx_axu2gca/alinx_axu2cga/gc
|
2022-02-12 18:12:45 +01:00 |
hubmartin
|
c2cd4410df
|
Code cleanup, add copyright
Signed-off-by: hubmartin <hub.martin@gmail.com>
|
2022-02-12 17:50:07 +01:00 |
|
Florent Kermarrec
|
c0e671919d
|
sqrl_acorn: Downgrade to SATA Gen1 for now (allow lower sys_clk_freq and enough for current tests).
|
2022-02-09 19:10:12 +01:00 |
|
Florent Kermarrec
|
d9b77c6f25
|
digilent_arty: Add --flash support.
|
2022-02-09 17:51:56 +01:00 |
|
Florent Kermarrec
|
4894926c40
|
xilinx_kv260: +x.
|
2022-02-09 16:01:51 +01:00 |
|
enjoy-digital
|
0c010d3d79
|
Merge pull request #347 from hplp/master
Alveo U280 with HBM now working for Linux
|
2022-02-09 07:44:36 +01:00 |
|
hubmartin
|
27b03df886
|
Add Lattice ECP5 VIP board + HDMI output board support
|
2022-02-08 21:47:58 +01:00 |
Sergiu Mosanu
|
27a7534568
|
Merge branch 'master' of github.com:hplp/litex-boards
|
2022-02-08 12:56:03 -05:00 |
|
Sergiu Mosanu
|
450a26f395
|
Merge branch 'master' of https://github.com/litex-hub/litex-boards
|
2022-02-08 12:55:09 -05:00 |
|
Sergiu Mosanu
|
7ed633dc4b
|
add guideline for serial interface
|
2022-02-08 12:54:34 -05:00 |
Sergiu Mosanu
|
0d2336768d
|
Merge branch 'litex-hub:master' into master
|
2022-02-08 12:20:35 -05:00 |
|
Sergiu Mosanu
|
5a0f69502b
|
enable use of HBM for linux boot
|
2022-02-08 12:18:38 -05:00 |
|
enjoy-digital
|
420b9cd68d
|
Merge pull request #346 from Arusekk/patch-1
Fix seven_seg pin assignment typo in DE1-SoC
|
2022-02-08 16:42:33 +01:00 |
Arusekk
|
5d52bc5461
|
Fix seven_seg pin assignment in DE1-SoC
Fixes quartus build error:
```
Error (171016): Can't place node "seven_seg5[6]" -- illegal location assignment PIN_AA2 File: /home/arusekk/src/fpga-proj/build/de1soc/gateware/de1soc.v Line: 49
```
|
2022-02-08 09:03:53 +01:00 |
|
Florent Kermarrec
|
18e8bec9d4
|
xilinx/kv260: Minor cleanup and add Build/Use instructions (from PR).
|
2022-02-07 08:12:43 +01:00 |
|
enjoy-digital
|
8621700916
|
Merge pull request #345 from sergachev/feature/xilinx_kv260
Add Xilinx KV260 support
|
2022-02-07 07:53:55 +01:00 |
|
enjoy-digital
|
365b37b31c
|
Merge pull request #344 from benstobbs/patch-1
Add 85F to help for orangecrab device
|
2022-02-07 07:45:41 +01:00 |
|
Ilia Sergachev
|
1d8c3789af
|
add Xilinx KV260 support
|
2022-02-06 14:38:57 +01:00 |
Ben Stobbs
|
617fa26acd
|
Add 85F to help for orangecrab device
The 85F orangecrab board exists, and works fine when this option is set to 85F, but leaving it out of the help is a bit confusing.
|
2022-02-06 10:36:58 +00:00 |
|
Florent Kermarrec
|
346623fd06
|
trellisboard: Rename Video I2C to videoi2c.
|
2022-02-04 09:26:31 +01:00 |
|
Florent Kermarrec
|
6d4fe82179
|
trellisboard: Rename hdmi_i2c to i2c (to have access to i2c_scan in the BIOS).
|
2022-02-02 11:08:21 +01:00 |
|
Florent Kermarrec
|
0522d8b0c5
|
trellisboard: Update i2c.add_init call.
|
2022-02-02 10:59:54 +01:00 |
|
Florent Kermarrec
|
7f4d464f1b
|
trellisboard: Add Video Terminal/Framebuffer support and use new I2C init feature to automatically configure TP410 at startup.
|
2022-02-02 09:52:12 +01:00 |
|
Sergiu Mosanu
|
53007b3cb6
|
ignore ip directory and files
|
2022-02-01 14:24:48 -05:00 |