a6b025f7f3
Fix Digilent Cmod A7 ISSIRAM reading
2023-08-05 19:56:15 +02:00
efc15a91a9
global: Use new WaitTimer integrated cast to int.
2023-08-01 14:56:35 +02:00
cbcf6df26f
lattice_ecp5_evn: add_jtagbone flag
...
This follows https://github.com/enjoy-digital/litex/pull/1087 which
allows using the built-in JTAG for both the FPGA programming and the
internal core of the FPGA.
2023-07-31 13:53:24 +02:00
2d3b81a532
efinix_trion_t120_bga576: Add Ethernet through RGMII PMOD and switch to it.
...
See https://github.com/enjoy-digital/liteeth/issues/66#issuecomment-859366899 for the PMOD.
2023-07-27 11:52:40 +02:00
c1088befe5
targets/CRG: Add rst signal when missing.
...
Allow properly reseting the PLL from the SoC.
2023-07-26 16:56:27 +02:00
ce121663ff
targets/uartbone: Update with LiteX change.
2023-07-20 15:42:47 +02:00
18a3909a9c
global: Switch to litex.gen.genlib.misc.
2023-07-06 22:11:45 +02:00
67be3ab677
targets: +x on alchitry_cu and vcu128.
2023-07-06 13:29:35 +02:00
e9335cd67a
Fix pins in Alchitry Cu platform, add target for Alchitry Cu
2023-06-27 21:35:55 +05:30
58805f037c
avnet_aesku40: Expose ethernet/etherbone parameters.
...
To be able to test more easily usrgmii build.
2023-06-13 09:26:07 +02:00
4705a0274e
Support SPI Flash in Colorlight 5A-75x
2023-06-09 13:43:34 -04:00
765ee1a3ce
sitlinv_stlv7325_v2: VCCIO jumper default factory setting is 3.3V
2023-06-07 10:12:55 +07:00
8a263c18f2
sitlinv_stlv7325: Rename to v1 and update VCCIO to fix --with-pcie generation.
2023-05-30 10:39:20 +02:00
2ae2dfa6a3
Add vcu128 target ( #497 )
...
Add initial VCU128 support.
2023-05-25 22:25:44 +02:00
e59d75f593
qmtech_xc7k325t: Fix build/CI.
2023-05-12 12:19:16 +02:00
ca6b607255
targets/qmtech: Add missing +x.
2023-05-12 12:09:20 +02:00
550bc0eee5
add QMTech XC7K325T board, add seven segment display to daughterboard
2023-05-08 11:51:51 +07:00
187080228c
add qmtech_xc7l325t
2023-05-08 05:17:35 +07:00
d33cf1a74c
mnt_rkx7: Cosmetic cleanups.
2023-05-05 09:48:06 +02:00
c05c494a82
targets/mnt_rkx7/usb_ohci: Use SoC.bus if SoC does not have a DMA bus.
2023-05-05 09:43:19 +02:00
6144966d24
Merge pull request #501 from mntmn/master
...
mnt_rkx7: RGB and USB fix, add HDMI terminal
2023-05-05 09:37:40 +02:00
9c222454cc
Merge pull request #503 from chmousset/add_colorlight_i5a-907
...
Add colorlight i5a 907
2023-05-03 09:50:26 +02:00
2bff2d4260
target/stlv7325-v2: tune eth phy delay
2023-05-01 09:28:03 -04:00
31c680abf8
[enh] added option for uartbone
2023-04-30 09:42:31 +02:00
874532871f
[enh] taking advantage of pins directly connected
2023-04-30 09:24:49 +02:00
1202c387bf
[init] added colorlight i5a-907 support
2023-04-30 09:24:46 +02:00
1f6e7f36a5
target/stlv7325-v2: fix typo in eth phy delay
2023-04-28 16:56:37 -04:00
1185ff51f1
Initial support for STLV7325 (v2) Kintex-7 board.
...
This is the 2nd (2023) version of the board sold through
https://www.aliexpress.us/item/3256801088848039.html
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2023-04-28 10:24:21 -04:00
a9e3e3c050
Merge branch 'master' of https://github.com/litex-hub/litex-boards
2023-04-25 20:29:11 +02:00
17a5d3c130
mnt_rkx7: add HDMI terminal, default USB to true
2023-04-25 20:27:29 +02:00
68bfb325a5
Fix Memory test failure of Alveo U250
2023-04-24 17:35:58 +09:00
340da5393c
Fix Memory initialization of Alveo U200 failed #1606
2023-04-17 18:59:50 +07:00
2ed66317c7
efinix_xyloni_dev_kit: fix build error
2023-04-14 22:31:21 +10:00
c7077880b9
copyright notices on enclustra
2023-04-11 10:29:52 +07:00
ed947d1b55
enclustra: add baseboard ST1
2023-04-11 10:29:44 +07:00
a8eb0b20c1
Merge pull request #491 from hansfbaier/stlv7325-hdmi
...
STL7325: Add Video, and connectors (FMC, BTB, 2.54mm)
2023-04-07 09:06:55 +02:00
2f13decc49
stlv7325: make VCCIO configurable
2023-04-07 09:27:03 +07:00
566a753dd3
stlv7325: S7PLL is enough
2023-04-07 08:45:06 +07:00
7c99f0758d
stlv7325: fix video args
2023-04-07 08:35:49 +07:00
66cbd27bbf
stlv7325: fix video PHY
2023-04-07 08:25:59 +07:00
5067a2683f
sitlinv_stlv7325: add video HDMI, enable compressed bitstream
2023-04-07 07:31:42 +07:00
43ce24dcb3
add QMTech 5CEFA5 Cyclone V board support
2023-04-06 18:27:51 +07:00
a4925d14f9
Merge pull request #488 from Icenowy/stlv7325-s7pll
...
sitlinv_stlv7325: use S7PLL instead of S7MMCM for system clock
2023-04-04 08:22:16 +02:00
1b9a74bf08
targets/nexys-video: simplify sata configuration
...
Make nexys-video SATA configuration similar to the way it is supported
on the majority of other SATA-capable targets.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2023-04-03 12:28:12 -04:00
b1107e94d4
sitlinv_stlv7325: use S7PLL instead of S7MMCM for system clock
...
As we do not need fine phase tweaking for the main system clock, use
S7PLL instead of S7MMCM to allow higher VCO frequency and more flexible
sys_clk_freq.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-04-03 16:45:13 +08:00
0125ae4271
Add support for QMTech Artix7 200T FBG484 board
2023-03-20 08:21:36 +07:00
98ddb97f5e
Support QMTech XC7A75T, XC7A100T core boards
2023-03-20 07:57:58 +07:00
6b8a5d35c0
sipeed_tang_nano_20k: support copackaged SDRAM
...
The copackaged SDRAM of GW2AR-18 QN88 package is 8MB size, 32bit DQ
width.
Add support for it.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-03-13 17:11:06 +08:00
291c43b898
sipeed_tang_nano_20k: new board
...
This board uses Gowin GW2AR series chip (which is GW2A with integrated
RAM).
Support for the integrated SDRAM on Tang Nano 20K is still TODO.
Note: currently when the SD card is enabled, block 0 could be correctly
read but block 1 will fail.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-03-13 16:45:25 +08:00
bf4f688164
targets/pcie: Update Xilinx S7 constraints.
2023-03-06 12:20:34 +01:00
Bayi
Florent Kermarrec
Josuah Demangeon
Mark1626
Ilya Ostrovskiy
Hans Baier
Chen
Gabriel Somlo
Charles-Henri Mousset
Lukas F. Hartmann
offNaria
Do Viet Thanh
Richard Tucker
Icenowy Zheng