9beaf25822
nexys4ddr: fix eth/int_n pin (B8) and use 4-bit on vga.blue.
2020-12-24 10:15:29 +01:00
2a04c5c74e
nexys4ddr: add support for litexvideo VGA Terminal
...
This commit adds VGA support for the Nexys A7/ Nexys 4 DDR.
The VGA is however limited to RGB443 instead of the full 12bit RGB444.
This is because IO D8 which is MSB for Blue, is also used for ETH int_n.
This makes the final output have a yellow tint.
2020-12-23 02:24:18 +05:30
f6a106cdf4
Fix orangecrab target
2020-12-20 01:07:43 +03:00
00fc2c5166
targets/orangecrab: use new DM remapping capability of LiteDRAM to fix LDM/UDM.
...
Required by VexRiscv-SMP that uses DMs on LiteDRAM interface.
2020-12-16 11:52:58 +01:00
bb58258fd4
Fix de10nano target
2020-12-14 15:27:33 +03:00
ec4ccc9fa5
platforms/xcu1525: fix ddram 1/2/3 pinout.
...
DDR4 now validated successfully with LiteDRAM on the 4 channels.
2020-12-11 13:58:26 +01:00
519f9449fa
targets/sds1104: litex_term now directly supports crossover uart.
2020-12-10 13:56:01 +01:00
18337cdf25
targets/arty: sync with litex repository
...
Signed-off-by: Robert Winkler <rwinkler@antmicro.com>
2020-12-07 17:32:40 +01:00
f66860c201
zybo_z7: fix clock pin constraint
...
Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>
2020-12-07 16:46:20 +01:00
8e5f955e4e
targets/orangecrab: Fix --sdram-device help text
...
Obviously --sdram-device takes the SDRAM device, not the ECP5 FPGA
device.
Fixes: bf3c9dc9bf
2020-12-04 14:34:01 +01:00
fe563baec7
targets/fomu: modification to ValentyUSB no longer required.
...
Following commits make it generic/portable while still using IOBuffers:
77b9d01058371526e432
2020-11-27 19:40:45 +01:00
5a4e28d47d
target/usb_acm: switch git clone to litex-hub/valentyusb repo (up to date with LiteX).
2020-11-27 18:53:45 +01:00
8d1095224f
add support for redpitaya14/16
2020-11-26 06:54:11 +01:00
11fa5c34ac
nexus: Allow selection of toolchain
...
Signed-off-by: David Shah <dave@ds0.me>
2020-11-25 09:45:25 +00:00
159a0c751c
targets/colorlight_5a_75x: update instructions and LiteEthPHYRGMII's tx_delay (required with LiteEth fixes).
2020-11-23 12:30:36 +01:00
03bb929f27
colorlight_5a_75x: add LedChaser.
2020-11-23 10:14:20 +01:00
d18deef10d
colorlight_5a_75x: switch prog to FT232 based programmer (ex: JTAG HS2).
2020-11-23 10:13:57 +01:00
ce38cff41d
mercury_xu5: reduce cmd_latency to fix problems with DRAM leveling
2020-11-20 15:31:47 +01:00
a2f3add24e
Merge pull request #123 from teknoman117/litefury
...
Support for the RHS Research LiteFury
2020-11-20 08:44:27 +01:00
389b623fe2
targets/litefury: new target
...
LiteFury is an Artix-7 development board in the M.2 form factor
for PCIe accelerator development. It's similar to the Aller but
with an xc7a100t rather than an xc7a200t and no TPM module.
https://rhsresearch.com/collections/rhs-public/products/litefury
2020-11-19 21:52:14 -08:00
49e1c34dfd
targets/acorn_cle_215: add SATA.
2020-11-18 19:14:18 +01:00
778ce53865
targets/xcu1525: add SATA.
2020-11-17 15:27:42 +01:00
27e19644f4
targets/kcu105: add SATA.
2020-11-16 18:44:18 +01:00
27f60b2e93
add initial Siglent SDS1104X-E support (Ethernet & DDR3 validated).
...
Pinout from https://github.com/360nosc0pe project.
2020-11-13 12:20:15 +01:00
d42af3ea19
targets: add --sys-clk-freq support to all targets.
2020-11-12 18:07:28 +01:00
72afb95329
targets: create platform on BaseSoC for all targets (consitency).
2020-11-12 16:57:31 +01:00
843e724e3d
targets/pcie: simplify using new LiteX's add_pcie method and enable it on all devices supported by LitePCIe.
2020-11-12 16:39:42 +01:00
9f11bfb0d1
qmtech_ep4ce15: convert name to lowercase, minor cleanup and add to test_targets.
2020-11-12 14:33:45 +01:00
31eb74dc2d
Merge pull request #122 from baselsayeh/master
...
add Qmtech EP4CE15 coreboard support
2020-11-12 14:27:49 +01:00
46e8a957fe
platforms/zybo_z7: fix default_clk typo.
2020-11-12 14:26:36 +01:00
ac075f18c7
platforms/crosslink_nx_evn/vip: add default_clk.
2020-11-12 14:26:17 +01:00
f3ccd140c2
targets/simple: add try/except on leds.
2020-11-12 14:26:00 +01:00
0fc67ddfdb
update copyright
2020-11-12 15:25:39 +02:00
7c6df67739
targets: add tinyfpga_bx target (based on icebreaker/fomu targets).
2020-11-12 14:09:25 +01:00
302e4ffdff
targets/simple: simplify (only keep minimal SoC + Leds) and add load argument.
...
ex of use:
./simple.py litex_boards.platform.ulx3s --build --load
./simple.py litex_boards.platform.trellisboard --build --load
./simple.py litex_boards.platform.arty --build --load
etc...
2020-11-12 13:54:30 +01:00
a4d05522d4
platforms/ice40/ecp5: add toolchain parameter with default to trellis (ECP5) or icestorm (iCE40).
...
Required to simplify simple.py target and use trellis/icestorm as default toolchain.
2020-11-12 13:33:30 +01:00
5cf7731f37
targets/netv2: add PCIe.
2020-11-12 12:16:01 +01:00
7a9f175450
targets/pcie: remove force of csr_data_width to 32 (this is now the default) but just add a check on the pcie block.
2020-11-12 12:08:20 +01:00
4401fec1e6
targets: remove add_csr("crg") (no longer needed).
2020-11-12 11:54:11 +01:00
bd4e92ad13
targets: cleanup, uniformize build arguments between targets.
2020-11-12 11:46:00 +01:00
1b1ed5ebf1
add Qmtech EP4CE15 coreboard support
2020-11-12 01:56:36 +02:00
5fbb176c2a
targets/crosslink_nx: update NXLRAM import.
2020-11-09 11:05:18 +01:00
afe44e2bd6
targets/crosslink_nx_evn: update NXPLL import.
2020-11-09 10:25:30 +01:00
39d979a9d3
targets/Ultrascale: add missing AsyncResetSynchronizer import.
2020-11-09 10:25:05 +01:00
97b64d16a6
Lattice NX PLL Support
2020-11-08 20:34:46 -06:00
1f52fbaca6
xcu1525: fix last ddram channel numbering.
2020-11-06 10:48:26 +01:00
2b17dc1b89
target: add rst signal to CRG to allow full reset of the SoC on reboot command.
2020-11-04 11:13:42 +01:00
aa6b9cab4a
targets/crosslink_nx_vip: +x.
2020-11-04 09:30:57 +01:00
ce14775dfb
targets/tec0117: move SerialFlashManager import to flash function.
2020-11-04 09:30:31 +01:00
2da4eabffe
platforms/icebreaker: fix refactoring typo.
2020-11-04 09:30:01 +01:00
c093d0d0fc
platforms: cleanup pass to uniformize comments/separators/orders.
2020-11-03 10:48:57 +01:00
8d26c241cd
kc705: revert sys_clk_freq to 125MHz.
2020-11-02 19:51:48 +01:00
babf638c2b
targets/nexys_video: add SATA support.
2020-11-02 19:43:25 +01:00
d1c9cc7553
Add LFE5U-12F device for ULX3S
2020-11-01 23:45:32 +00:00
e950a4a588
targets/kc705: update sata pads.
2020-10-30 17:12:59 +01:00
a410e447e1
targets/kc705/sata: enable write support.
2020-10-30 14:51:40 +01:00
d626861e95
platforms/acorn_cle_215: add serial_io (on P2).
2020-10-29 12:10:12 +01:00
f9252fdd45
targets/kc705: simplify SATA using LiteX's add_sata integration method.
2020-10-29 10:16:40 +01:00
7da8628fba
targets/kc705: switch SATA to gen2.
2020-10-28 19:09:30 +01:00
931f6667ac
targets/kc705: add initial SATA support.
2020-10-26 15:15:24 +01:00
51934567fe
Merge pull request #118 from daveshah1/lifcl-vip
...
Add CrossLink-NX VIP board platform and target
2020-10-22 11:03:47 +02:00
a38c1e7062
mist: add copyrights.
2020-10-22 10:48:58 +02:00
20720693c4
crosslink_nx_vip: Add HyperRAM support
...
Signed-off-by: David Shah <dave@ds0.me>
2020-10-22 09:15:40 +01:00
b278d8bccc
Add CrossLink-NX VIP board platform and target
2020-10-22 09:15:35 +01:00
4541c39e94
Initial support for the MIST board ( https://github.com/mist-devel/mist-board/wiki )
2020-10-17 12:28:22 +02:00
814e7630e4
targets/xilinx: use generic name for idelay clk (avoid clk200, clk400, etc...) since we somtimes want to change it.
2020-10-13 12:10:29 +02:00
06137452d2
targets/xcu1525: use ddram_channel to select clk300.
2020-10-13 11:57:00 +02:00
982cfd5ad5
platforms/xcu1525: fix ddram constraints, add clk300 constraints for all channels.
2020-10-13 11:50:36 +02:00
c3ea04b6e9
targets/s7/us: update sdram (manual cmd_latency no longer needed).
2020-10-12 18:46:21 +02:00
ddf7038c78
ulx3s: add 1.7 and 2.0 revisions support.
2020-10-12 13:23:26 +02:00
204d22c62b
Merge pull request #115 from BryanJacobs/master
...
platforms/ulx3s: Update ULX3S SD pins for revision 2.0
2020-10-12 12:55:17 +02:00
3b11e60fb1
Update ULX3S SD pins for revision 2.0
2020-10-11 14:17:48 +11:00
5e67853a21
versa_ecp5: Add --eth-phy to select ethernet phy
...
This also simplifies the logic a bit.
2020-10-09 23:56:16 +02:00
477734ff06
versa_ecp5: Add etherbone support
...
Etherbone can be enabled with --with-etherbone
2020-10-09 00:53:08 +02:00
55da8b867a
platforms/zedboard: minor cleanups to uniformize with other platforms.
2020-10-07 11:25:20 +02:00
e225cbd28f
add zedboard platform to CI
2020-10-06 11:35:03 -07:00
8ee20a3f30
clean up imports
2020-10-06 11:24:34 -07:00
865c2bd98c
zedboard platform: clean up
...
* remove unused code
* remove oled integration code
* openocd = default programmer
2020-10-06 11:00:36 -07:00
94ef096e77
Merge branch 'master' of https://github.com/litex-hub/litex-boards into HEAD
2020-10-06 10:05:34 -07:00
fff20f7532
targets/fomu: base it on iCEBreaker target + USB-ACM.
...
This uniformizes Fomu target with others, provide a simple example of LiteX SoC
on Fomu and will ease maintenance.
2020-10-06 11:39:30 +02:00
12aed44577
add zedboard platform
2020-10-06 00:28:54 -07:00
79ef091a06
Merge pull request #110 from pepijndevos/gowin
...
Add initial support for Trenz TEC0117 board
2020-10-05 19:50:09 +02:00
2ee32f2a15
Merge pull request #109 from geertu/orangecrab-Fix-r0.1-user_led-mapping
...
orangecrab: Fix r0.1 user_led mapping
2020-10-02 09:40:41 +02:00
062fbd6c63
Merge pull request #108 from daveshah1/dave/nx-evn-doc
...
crosslink_nx_evn: Improve documentation on UART jumpers
2020-10-02 09:40:04 +02:00
18e5def9f2
don't verify erase, very slow
2020-10-01 08:41:16 +02:00
81e4f1f158
add initial support for Trenz TEC0117 board
2020-09-30 14:01:36 +02:00
b2e34f5faf
orangecrab: Fix r0.1 user_led mapping
...
On r0.1, all three user_leds are mapped to the same pin.
Fix this by mapping them to the pins connected to the individual
channels of the RGB LED, to match the comments, the schematics, and the
spirit of r0.2.
Untested on real hardware (I have r0.2 only).
Fixes: c94cbae0c0
2020-09-25 10:33:21 +02:00
de09b10726
targets/xcu1525: add ddram-channel selection and rewrite DRC workaround comment.
2020-09-24 18:19:49 +02:00
cc53206aff
targets/kcu105: create specific cd_eth for ethphy.
2020-09-24 10:25:55 +02:00
5b7288cfee
targets/kcu105: add Etherbone support.
2020-09-24 09:55:11 +02:00
77ba49f2bb
targets/pcie: update timing_constraints (now provided by the .xci).
2020-09-24 09:50:55 +02:00
c6610b4a3f
platforms/xcu1525: update ddram1/2/3 pinout.
...
Using https://github.com/d953i/Custom_Part_Data_Files/blob/master/Boards/Xilinx_BCU1525/BCU1525_DIMMx.xdc
2020-09-20 21:07:00 +02:00
e5a144e9cd
platforms/xcu1525: update ddram0 pinout.
...
Using https://github.com/d953i/Custom_Part_Data_Files/blob/master/Boards/Xilinx_BCU1525/BCU1525_DIMM0.xdc .
2020-09-19 23:28:34 +02:00
8ffb86c0dc
platforms/fk33/xcu1525: define pcie_x2/x4/x8/x16.
2020-09-19 22:37:05 +02:00
e4cdbe0f7a
targets/ac701: reduce ddram pads to the first 4 modules.
2020-09-05 11:46:07 +02:00
8a9fd02768
crosslink_nx_evn: Improve documentation on UART jumpers
...
Signed-off-by: David Shah <dave@ds0.me>
2020-09-05 09:58:28 +01:00
76ac4a69a8
rename forest_kitten_33 platform/target to fk33.
2020-09-04 20:05:18 +02:00
979fee7517
forest_kitten_33: add pcie.
2020-09-04 20:02:43 +02:00
ad48728160
xcu1525: update headers (were still using old format).
2020-09-04 19:59:09 +02:00
ad4c483c32
Merge pull request #106 from daveshah1/dave/alveo_u250_pcie
...
alveo_u250: Add PCIe x4 support
2020-09-04 19:22:48 +02:00
Florent Kermarrec
Sahaj Sarup
Vadim Kaushan
Robert Winkler
Alessandro Comodi
Geert Uytterhoeven
Gwenhael Goavec-Merou
David Shah
Jędrzej Boczar
Nathaniel R. Lewis
Basel Sayeh
davidcorrigan714
Kevin Mehall
YanekJ
Bryan Jacobs
Konrad Beckmann
Michael Betz
Pepijn de Vos