a68c00e48e
Merge pull request #104 from DerFetzer/colorlight_5a_75e_v6_0
...
Add support for 5A-75E V6.0 board
2020-09-04 19:21:02 +02:00
ae6a052e57
alveo_u250: Add PCIe x4 support
...
Based on the implementation in xcu1525
Signed-off-by: David Shah <dave@ds0.me>
2020-09-04 14:20:04 +01:00
2eda9d0252
xcu1525: add DDR4 IOs for C1/C2/C3 and fix compilation (untested).
2020-09-04 11:34:33 +02:00
7b6b71d4e3
xcu1525: add initial DDR4 support in C0 (untested).
2020-09-03 19:48:23 +02:00
5a62a07b45
xcu1525: add initial PCIe support (untested).
2020-09-03 19:26:02 +02:00
51e881d1ff
add minimal xcu1525 support (VCU1525 or BCU1525 boards).
2020-09-03 19:06:43 +02:00
8bd736bd77
targets/colorlight_5a_75x: make Ethernet PHY selectable, cast sys_clk_freq to int for Wishbone
2020-09-02 22:08:45 +02:00
cc78574297
targets/colorlight_5a_75x: fix rx_data pin order for Ethernet PHY 0
2020-09-02 22:04:23 +02:00
24b853c2db
targets/colorlight_5a_75x: force use of internal oscillator when using Ethernet with 5A-75E V6.0
2020-09-01 17:07:52 +02:00
8b1fee0e66
Add support for 5A-75E V6.0 board
2020-09-01 17:02:17 +02:00
9b6ed6bdf1
targets/orangecrab: add fallback to bootloader when usr_btn is pressed for 1 second.
2020-09-01 16:22:32 +02:00
b9ac72cf78
targets: simplify clocking on iCE40/ECP5 targets (AsyncResetSynchronizer now integrated in PLL).
2020-09-01 13:38:32 +02:00
9e2d301745
targets/icebreaker: simplify, update PLL/API and BIOS execution from SPI Flash.
2020-09-01 12:58:13 +02:00
beccecf59f
orangecrab: reduce DDR3 power consumption/heat and get back USB PLL to CRGSDRAM.
...
- disable DQ termination.
- disable RTT_NOM.
- drive VCCIO/GND pads.
Reduce current from 0.25A to 0.12A with: ./orangecrab.py --uart-name=usb_acm --sys-clk-freq=48e6.
Still working at 96MHz, 0.17A with: ./orangecrab.py --uart-name=usb_acm --sys-clk-freq=96e6.
See https://github.com/enjoy-digital/litedram/issues/216 .
2020-08-28 20:01:54 +02:00
63b65e278c
crosslink_nx_evn: update copyrights.
2020-08-24 22:33:58 +02:00
153326fa26
targets/icebreaker: update flash.
2020-08-24 17:19:15 +02:00
795e34aafd
add initial Crosslink-NX support.
2020-08-24 16:47:38 +02:00
84c19a6cdf
targets/de0nano: set sys2x_ps phase to 180° for sdram_rate=1:2.
2020-08-24 09:28:51 +02:00
70594a5305
ulx3s: simplify sdram constraints and increase phase to 180 for sdram_rate=1:2.
2020-08-24 09:05:58 +02:00
1781be166a
general: add SPDX License identifier to header and specify files are part of LiteX-Boards.
2020-08-23 15:00:17 +02:00
83d8b8d1b4
platforms/acorn_cle_215: integrated sdcard ios as extension.
2020-08-22 22:11:51 +02:00
f328909578
Moved platform call inside of BaseSoC init for compatibility with linux-on-litex-vexriscv support. Added optional spi-sdcard support over P2 header.
2020-08-09 16:27:41 -04:00
45bb329b56
targets/colorlight_5a_75x: enable HalfRate SDRAM PHY.
2020-08-07 19:26:12 +02:00
b6a1ad5a9c
targets/orangecrab: add simple CRG when built without DDR3.
2020-08-07 18:10:03 +02:00
869ceadacb
targets: use platform.request_all on LedChaser.
2020-08-06 20:04:03 +02:00
d2cd6d4c0e
arty: Change USB-uart and I2S Pmod configuration
...
This makes it compatible with the Arty A7 expansion board by Antmicro
(https://github.com/antmicro/arty-expansion-board ).
2020-08-05 11:54:25 +02:00
ee28d7b5ec
targets/ulx3s/add_oled: simplify.
2020-08-04 12:31:15 +02:00
eba70377b7
add optional OLED peripheral to ULX3S target
2020-08-04 11:07:30 +02:00
929e55d7e6
platforms/trellisboard: add SDCard PMOD pins.
2020-07-29 09:07:55 +02:00
5fd3e8dbcd
ecpix5: add SDCard.
...
Validated with Linux-on-LiteX-VexRiscv.
2020-07-28 17:45:49 +02:00
94ccf1dd3e
targets/trellisboard: simplify clocking when no DDR3, remove firmware_ram (was here for debug).
2020-07-27 16:31:46 +02:00
eb8a484032
targets/de10nano: fix typo.
2020-07-26 12:01:11 +02:00
2cef54a909
targets/colorlight_5a_75x: avoid sys_clk_freq of 125MHz with etherbone (no longer required).
...
This allows creating SoCs with CPU, SDRAM and Etherbone enabled all together.
2020-07-26 11:58:42 +02:00
760b8ff93a
arty: improve xy_pmod_io genericity (allow selecting the PMOD) and enable SDCard.
2020-07-24 16:29:35 +02:00
04fc98f834
de0nano/ulx3s: add sdram HalfRate support (untested).
2020-07-24 16:12:46 +02:00
d0ca1befa6
targets/de10nano/minispartan6: simplify HalfRate support, rename argument to sdram_rate.
2020-07-24 16:11:57 +02:00
9730c6f722
platforms/de10nano: use additional sdram constraints required for HalfRate.
2020-07-24 12:27:36 +02:00
7399d13cef
paltforms/de10nano/sdram: enable fast input/output on dq.
2020-07-24 11:27:25 +02:00
b4b1ab8621
paltforms/de10nano: simplify IO constraints (for consistency with others platforms).
2020-07-24 09:03:35 +02:00
89c5bf43cf
Merge pull request #92 from rob-ng15/master
...
Enable use of HalfRateGENSDRPHY on de10nano
2020-07-24 08:49:09 +02:00
1e1589a514
zybo_z7: demonstrate use of PS7 (with --cpu-type=zynq7000).
...
This uses a pre-generated .xci hosted on github, still need to figure out where the best location for it.
2020-07-23 17:45:21 +02:00
7cda143250
Allow use of HalfRateGENSDRPHY
2020-07-23 14:41:35 +01:00
cf9839307f
Add Misc
...
Add Misc("") arguments to various inputs/outputs for stability. Allows de10nano to use HalfRateGENSDRPHY for sdram
2020-07-23 14:40:04 +01:00
8a3b453e2f
add Zybo Z7 minimal platform/targets: no PS7 support and USB-UART PMOD on JB.
2020-07-23 15:26:22 +02:00
e723bef49a
platforms/arty: add usb_uart_pmod_io (USB-UART PMOD on JA) to ease debug with a second UART (for UARTbone/LiteScope).
...
Also use pmod connector names in i2s_pmod and sdcard_pmod.
2020-07-22 14:41:09 +02:00
19d0b95867
platforms/targets: keep in sync with litex.
2020-07-22 08:53:49 +02:00
0ee4b215b9
trellisboard/ulx3s: fix sdcard slewrate.
2020-07-21 15:23:08 +02:00
7efa1c37a1
platforms/arty: add missing pullups on sdcard.
2020-07-21 15:22:39 +02:00
2ce24df76d
platforms/genesys2: add internal_vref to 0.750v on bank 34 (DDR3).
2020-07-18 22:18:41 +02:00
135c387155
platforms/ulx3s: add assertion for supported devices.
2020-07-17 12:04:06 +02:00
851378f0a9
platforms/trellisboard: move ddram_vtt_en.
2020-07-17 12:03:37 +02:00
165f9eacde
Merge pull request #91 from antmicro/jboc/gensdrphy
...
targets/minispartan6: add support for HalfRateGENSDRPHY
2020-07-15 08:22:57 +02:00
02f53e6326
targets/minispartan6: add support for HalfRateGENSDRPHY
2020-07-14 11:01:09 +02:00
44ad902aad
platforms/kc705.py: LPC DP0_M2C/C2M diff pair
2020-07-13 10:26:17 -07:00
a461f5ac59
orangecrab: add usb, rst_n signals for r0.1
...
- fix standard io extensions
- Use newly assigned code for orangecrab 1209:5af0
2020-07-09 19:56:32 +09:30
f3d02d8fca
Merge pull request #87 from antmicro/arty_i2s
...
arty: Add configuration of I2S pins
2020-07-07 17:22:10 +02:00
df54b93db3
arty: Add configuration of I2S pins
2020-07-07 15:25:10 +02:00
d9595a317e
targets/orangecrab: use user_btn as rst_n.
2020-07-06 17:49:05 +02:00
40fbbbbebc
platforms/orangecrab: add sdcard pins on r0_2.
2020-07-06 17:48:48 +02:00
7b1bf9d74a
targets: remove sdcard specific clock domain (now generated by the PHY).
2020-07-03 20:09:30 +02:00
31e6997e70
sdcard: rename cd_sdcard to cd_sd to avoid unnecessary clock domain.
2020-07-01 12:58:48 +02:00
fe3ea805bc
targets/pcie: make pcie optional (--with-pcie) and avoid forcing uart to crossover.
2020-06-30 18:44:00 +02:00
7a48a61605
targets: add indentifier on all targets.
2020-06-30 18:11:04 +02:00
fc22e28fe9
targets: replace PCIeSoC with BaseSoC.
2020-06-30 17:41:57 +02:00
d28a0c4258
targets/pcie: remove DNA/XADC/ICAP that were only on PCIe targets.
...
DNA/XADC/ICAP are demonstrated in LitePCIe repository and should probably be added with
a add_xy method.
2020-06-30 17:37:24 +02:00
e91a5d6b82
targets/pcie: remove soft reset.
2020-06-30 17:28:13 +02:00
1356ebb416
targets/ecp5: update clocking on boards with DDR3 to use reset from ddrphy.init and use primary clock for Power on reset.
2020-06-29 16:42:53 +02:00
49973990f3
Merge pull request #85 from oskirby/logicbone
...
Add Logicbone ECP5 board
2020-06-29 16:24:15 +02:00
76a32ba8ec
Add Logicbone ECP5 board
...
The Logicbone is an Open Source development board for the Lattice ECP5
being developed at https://github.com/oskirby/logicbone
2020-06-27 03:32:47 -07:00
efe33c9764
targets/arty: add fixed sdcard clock and remove sys2x (use NETWORKING interface_type on DDR3).
2020-06-25 11:21:24 +02:00
6753a92296
targets: add fixed sdcard clock on boards with SDCard support.
2020-06-25 11:20:38 +02:00
782c856619
platforms/genesys2: add usb_fifo.
2020-06-23 18:02:53 +02:00
936ba5b279
platforms/genesys2: add openocd specific configuration (channel 1 used for JTAG).
2020-06-23 11:55:50 +02:00
55ed9fbf02
platforms/kcu105: add sdcard/spisdcard.
2020-06-23 11:44:40 +02:00
eee00ebd0a
platforms/genesys2: add sdcard/spisdcard.
2020-06-23 11:44:26 +02:00
6568c8a3ae
platforms/netv2: add spisdcard.
2020-06-23 11:44:10 +02:00
7de7c4be5c
platforms/kc705: rename mmc to sdcard and make it similar to other boards.
2020-06-23 10:56:31 +02:00
0ecb8609b3
platform/arty: also update spisdcard.
2020-06-16 20:15:12 +02:00
7a8b0b743d
platforms/pano_logic_g2: -x.
2020-06-16 19:53:46 +02:00
f70655d1ac
Change sdcard Pmod from JB to JD
...
Signed-off-by: Kamil Rakoczy <krakoczy@antmicro.com>
2020-06-15 12:01:46 +02:00
04f6d4463a
versa_ecp5: simplify device (LFE5UM5G or LFE5UM) and adapt integrated_rom_size only for Microwatt.
2020-06-13 11:17:05 +02:00
90092164c8
Add device option for ECP5 Versa board
...
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
2020-06-12 18:39:43 -05:00
b1be5dcc23
Fix FTBFS from undersized BIOS ROM region with Microwatt
...
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
2020-06-12 18:39:43 -05:00
9b45ec0f35
de10lite: simplify vga terminal.
2020-06-11 19:59:32 +02:00
85cac7abc0
de10nano/Mister: review/simplify.
2020-06-11 19:54:55 +02:00
64372d7876
targets/orangecrab: add spi-sdcard and workaround for ValentyUSB.
2020-06-11 19:21:44 +02:00
c94cbae0c0
orangecrab: add user_led (RGB leds), DFUProg and --load support.
2020-06-11 19:21:40 +02:00
9aea2272eb
Merge pull request #80 from rob-ng15/master
...
Use 128mb sdram, uart via i/o port on i/o board and vga terminal via i/o board
2020-06-11 18:16:18 +02:00
45bd50b000
targets: rename colorlight_5a_75b to colorlight_5a_75x (since we are now also supporting the 75e).
2020-06-10 23:14:37 +02:00
ad1693a1ad
Merge pull request #82 from Disasm/colorlight-5a-75e
...
Add Colorlight 5A-75E V7.1 board
2020-06-10 23:09:26 +02:00
b312c65eb9
Merge pull request #81 from Disasm/fix-5a-75b
...
Update J4 pin 5 on Colorlight 5A-75B V7.0
2020-06-10 23:07:33 +02:00
94861bbb9a
targets/orangecrab: uncomment MT41K512M16.
2020-06-10 19:30:07 +02:00
b6df166f5a
platforms/arty: add spisdcard to _sdcard_pmod_io.
2020-06-10 17:38:16 +02:00
00c8e40d02
platforms/ulx3s: add sdcard pins.
2020-06-10 17:37:50 +02:00
0c590abf12
Update colorlight_5a_75b target: add 5A-75E board support
2020-06-10 03:20:32 +03:00
1acdb962a5
Add 5A-75E V7.1 board
2020-06-10 03:07:20 +03:00
939f05fea4
Update J4 pin 5 on Colorlight 5A-75B V7.0
2020-06-10 02:49:18 +03:00
485c242f24
Use 128mb sdram, uart via i/o port on i/o board and vga terminal via i/o board
2020-06-08 11:05:58 +01:00
e52d6aca5f
Use 128mb sdram, uart via i/o port on i/o board and vga terminal via i/o board
2020-06-08 11:05:36 +01:00
f9a8edb973
targets/trellisboard: add initial LiteSDCard support
...
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-06-03 13:41:57 -04:00
d87a11a9cb
targets/pcie: use generate_litepcie_software on all targets with PCIe.
2020-06-03 08:30:54 +02:00
9f83b6e3cf
targets/acorn_cle_215: use new generate_litepcie_software functions and add --driver argument to generate driver.
2020-06-03 08:20:43 +02:00
091ec846a1
targets/acorn_cle_215: automatically copy software from litepcie and generate headers in kernel directory.
2020-06-02 20:09:45 +02:00
06edf48897
targets: rename gateware-toolchain parameter to toolchain.
2020-06-02 13:45:05 +02:00
0b11aba8a1
platforms/nexys_video: add spisdcard pins.
2020-05-29 19:37:04 +02:00
76df4e39c8
targets: simplify Ethernet/Etherbone integration on targets with both.
2020-05-29 19:20:27 +02:00
2e1a816d1f
pano_logic_g2: switch to LiteEthPHY and simplify Ethernet/Etherbone.
2020-05-29 10:41:35 +02:00
33fe308ef0
Merge pull request #78 from antmicro/jboc/spd-read
...
ZCU104: add I2C
2020-05-27 14:56:31 +02:00
e5578a1ae8
zcu104/platform: change I2C number to 0
2020-05-27 14:31:22 +02:00
ac1f1cd6a7
zcu104: add I2C
2020-05-27 12:47:43 +02:00
71f220a24d
colorlight_5a_75b: remove unnecessary parenthesis.
2020-05-27 10:13:44 +02:00
2f3817cba9
pano_logic_g2: add ethernet (build but not functional yet) and use user_btn_n as sys_rst.
2020-05-27 10:13:12 +02:00
f19bc36813
pano_logic_g2: add revision support (b and c, c as default) and add OpenOCD programmer.
...
Tested with:
./pano_logic_g2.py --uart-name=jtag_uart --build --load
./litex_jtag_uart.py --config=openocd_xc6_ft232.cfg
lxterm /dev/pts/X
2020-05-27 08:58:40 +02:00
d6518c7dc2
prog/openocd: fix openocd_xc6 cfgs.
2020-05-27 08:48:16 +02:00
22f18f618e
pano_logic_g2: move gmii_rst_n to _CRG.
2020-05-26 08:36:06 +02:00
0648c04158
Updated comment, added link to clocking documentation.
2020-05-25 14:48:24 -07:00
1ab46562bd
Take Ethernet PHY out of reset so default clock is 125 Mhz (and baud rate is 115,200)
2020-05-25 10:11:03 -07:00
9b572ece0e
forest_kitten_33: add minimal target and use es1.
...
Tested with:
./forest_kitten_33.py --uart-name=jtag_uart --build --load
litex/tools/litex_jtag_uart.py
lxterm /dev/pts/X
2020-05-25 12:26:52 +02:00
435913f7d8
platforms/nexys4ddr: add option to build with spi-mode sdcard support
2020-05-24 19:09:25 -04:00
0d549a8c89
platforms: add forest_kitten_33 initial platform suppport.
2020-05-24 11:22:02 +02:00
12b54a7a7f
platforms/alveo_u250: add clk300 clock constraints.
2020-05-24 11:18:30 +02:00
46f78b5002
nexys_video: add usb_fifo pins.
2020-05-22 14:28:55 +02:00
445338e2e7
platforms/nexys_video: add specific openocd cfg (use channel 1).
2020-05-22 14:12:45 +02:00
5aeb7d85e6
targets/acorn_cle_215: fix typo in description.
2020-05-21 10:18:06 +02:00
eeba64d7b2
targets: use soc.build_name in load/flash bitstream.
2020-05-21 09:12:29 +02:00
76551dec4c
platforms/nexys_video: add sdcard pins, move clk/rst to top.
2020-05-20 13:05:18 +02:00
83457b8791
platforms/arty: add _sdcard_pmod_io.
2020-05-20 12:09:43 +02:00
8158d94ae7
targets/c10lprefkit: switch to litehyperbus.
2020-05-19 15:48:19 +02:00
587caf7584
paltforms/marblemini: add break_off_pmod.
2020-05-19 15:42:53 +02:00
c2cd863658
platforms/ecp5_evn: rename spiflash1x to spiflash, rewrite hardware/configuration description and remove make_spiflash.
...
The Platform file should not contain import code related to cores, this has to be done in the target.
2020-05-19 15:29:25 +02:00
3f0f12011b
Merge pull request #70 from ilya-epifanov/ecp5-evn-spi1x-and-flash-params
...
ECP5-EVN SpiFlash parameters
2020-05-19 15:16:25 +02:00
b9ee3a797a
alveo_u250: re-organize the auto-generated IOs, add build/load parameters.
2020-05-16 11:47:14 +02:00
c0b7afc739
targets/alveo_u250: +x.
2020-05-16 11:13:01 +02:00
67d2a4940e
tools/extract_xdc_pins: +x.
2020-05-16 11:12:46 +02:00
482d7a6b95
targets/pcie: use 128-bit datapath and 8 max_pending_requests on pcie_x4 configurations.
2020-05-14 15:34:00 +02:00
2bb7fce5e3
targets/acorn_cle_215: add minimal instructions to reproduce the results.
2020-05-13 17:55:52 +02:00
6757c4e298
Merge pull request #71 from daveshah1/alveo_u250
...
[WIP] Add Alveo U250 platform and target
2020-05-13 09:10:22 +02:00
c7404e356f
targets/acorn_cle_215: switch to MT41K512M16 (Acorn has a 1GB DDR3 vs 512MB on NiteFury).
2020-05-09 16:39:17 +02:00
d05b10fd76
target/camlink_4k: add missing import.
2020-05-09 12:27:07 +02:00
4faa91c7f2
platforms/marblemini: review/cleanup.
...
- add copyrights.
- add link to documentation.
- reindent code.
- rename some IOs (for consistency with the others platforms).
- add pullup on clk20_vcxo_en.
- set clk20_vcxo as default clock.
- remove ununnecessary eth constraints. (we are using IO primitives).
- move PMODS to connectors (for consistency with others platforms).
2020-05-09 10:16:42 +02:00
4ffdcb5ea9
Merge pull request #75 from jersey99/marblemini
...
Marblemini [https://github.com/berkeleylab/marble-mini/ ]
2020-05-09 09:39:40 +02:00
e4ccfcfad1
platforms/marblemini.py: Cleanup. Add openocd for programming marblemini
2020-05-08 17:20:14 -07:00
6f22f082ff
targets: add LedChaser on platforms with user_leds.
...
Default to Chaser mode and similar user interface than GPIOOut.
2020-05-08 22:16:13 +02:00
b9a0f2363c
Merge pull request #74 from tommythorn/master
...
targets/orangecrab.py: propagate command arguments
2020-05-08 07:28:05 +02:00
a7d6de78ae
Merge branch 'master' into marblemini
2020-05-07 12:19:47 -07:00
5f7f087cba
community/platforms/marblemini.py: Added marblemini from https://github.com/berkeleylab/marble-mini/
2020-05-07 12:17:42 -07:00
19b12fd984
targets/panol_logic_g2: replace with a minimal target.
2020-05-07 16:36:04 +02:00
99c04358bf
platforms/pano_logic_g2: simplify/cleanup.
2020-05-07 16:35:34 +02:00
6b5492a707
pano_logic_g2: add copyrights.
2020-05-07 15:24:03 +02:00
6ddd859309
add pano_logic_g2 from litex-buildenv.
2020-05-07 15:22:22 +02:00
27c242b2ca
targets/pcie: switch to PCIe X4 on all boards that support it.
2020-05-07 12:18:39 +02:00
f9939532b6
targets/pcie: update LitePCIe constraints.
2020-05-07 12:15:52 +02:00
6335717eca
targets/orangecrab.py: propagate command arguments
...
The parsed args are stripped off by soc_core_argdict() (called from
soc_sdram_argdict() so we have to pass them explicitly (or pass the
original "args", but this mimics the rest of the code in the repo).
This fixes #72
2020-05-06 18:24:11 -07:00
d34c3baf15
prog: use different openocd config files for FT232/FT2232.
2020-05-06 16:14:51 +02:00
117d1a1c75
prog: add colorlight_5a_75b openocd config.
2020-05-06 16:01:59 +02:00
e500d90bcc
platforms/ecpix5: set pullups on rx_data to advertise as RGMII mode.
2020-05-06 16:00:46 +02:00
59e8c2cd30
acorn_cle_215: add .bin generation and --flash argument, working on hardware :).
2020-05-06 12:27:07 +02:00
a049fa6856
add Acorn CLE 215+ platform/target.
2020-05-06 07:53:55 +02:00
da61aabc5b
targets: remove USDDRPHY_DEBUG and set cmd_latency to on all Kintex7/Ultrascale targets.
2020-05-05 16:32:10 +02:00
b58b9b9e6a
platforms: fix CI.
2020-05-05 16:01:43 +02:00
2d9543b65e
targets: add build/load parameters on all targets.
2020-05-05 15:11:47 +02:00
19eb5708de
platforms: make sure all traditional platforms have a create_programmer method.
2020-05-05 13:34:57 +02:00
84468c2a63
targets/CRG: platforms are now automatically constraining the input clocks.
2020-05-05 11:51:57 +02:00
1f88a9d5ec
platforms: make sure clocks inputs are constraints on all platforms.
...
Also use new loose lookup_request to simplify constraints.
2020-05-05 11:45:41 +02:00
86648ec7d8
platforms/vcu118: rename ddram_second_channel to ddram:1.
2020-05-05 09:54:11 +02:00
e1820c7831
platforms/ac701: indent HPC.
2020-05-05 09:49:59 +02:00
2129b67779
platforms: make sure all plarforms have separators.
2020-05-05 09:47:55 +02:00
ea0eda9f75
platforms: make sure all Xilinx/Altera platforms have a create_programmer method, use OpenOCD on Spartan6 and 7-Series.
2020-05-05 09:42:34 +02:00
588bbac719
add prog directory with some Xilinx OpenOCD configurations files.
2020-05-05 09:11:06 +02:00
78b5727774
targets: rename usb_cdc to usb_acm.
...
As discussed recently on Discord.
2020-04-30 21:48:10 +02:00
088cceca8b
Add Alveo U250 platform and target
...
Signed-off-by: David Shah <dave@ds0.me>
2020-04-29 12:31:16 +01:00
0ba8045789
Added spiflash1x pins, a method to create an SpiFlash instance and a note on a second UART channel of FT2232H
2020-04-28 21:56:33 +02:00
2213d73b89
targets/kcu105: use cmd_latency=1.
2020-04-25 12:13:49 +02:00
a8a42c55c9
targets/kc705: manual DDRPHY_CMD_DELAY adjustment no longer needed.
2020-04-25 11:08:05 +02:00
865b01ec75
ecpix5: add ethernet.
2020-04-22 20:21:59 +02:00
6fe4c4ea62
ecpix5: add DDR3 (working)
2020-04-22 17:03:22 +02:00
efb13bc118
add mininal ECPIX-5 board support (Clk/Rst/Leds/UART), BIOS working.
2020-04-22 16:31:07 +02:00
4154bdf034
targets/PCIe: add PCIe software reset.
2020-04-20 12:30:09 +02:00
4ad6042e07
platforms/de0nano: swap serial tx/rx to ease use of cheap FT232 based cables.
2020-04-18 11:36:18 +02:00
4185a019f5
targets: manual define of the SDRAM PHY is no longer needed.
2020-04-16 11:25:59 +02:00
cb95962850
targets/ulx3s and colorlight_5a_75b: cleanup USB ACM addition and only keep USB ACM changes.
...
- remove update in loading/flashing: we need to thinks how to integrate this.
- remove specific README: documentation is moved to the files, link to more complete project can
be added if maintained externally, as done for the iCEBreaker for example.
- revert default freq on ULX3S to 50MHz and instantiate a second PLL as done on the colorlight.
2020-04-14 16:14:18 +02:00
f79a010a29
Addition of flash for colorlight board
2020-04-14 14:37:56 +01:00
389e8aa13a
Addition of USB ACM for ECP5
2020-04-14 13:53:46 +01:00
a12faae0fb
targets/colorlight_5a_75b: increase sys_ps phase (fixes memtest).
2020-04-14 11:24:16 +02:00
52c9648176
arty_s7: fix copyrights, rename to arty_s7, various minor changes to make it similar to others targets.
2020-04-13 15:20:36 +02:00
bbb1ded9f8
Added Arty S7 board
...
As the pin-out is totally different from the A7 board I did put this
in a separate class and not as a variant of the Arty board.
Used migen Arty S7 board file and Digilent xdc file as reference.
2020-04-12 21:48:25 +02:00
188d4a45d6
targets: use DDROutput on sdram_clock and similar configuration for all SDRAM targets.
2020-04-10 14:43:04 +02:00
ca197af2be
targets/simple: use CRG from litex.build.
2020-04-10 10:26:19 +02:00
b8a648d499
litex.build: update from migen.genlib.io litex.build.io.
2020-04-10 09:23:33 +02:00
4d7135f167
platforms/versa_ecp5: remove LatticeProgrammer (no longer used since we can now use OpenOCD).
2020-04-09 23:06:57 +02:00
2cf3c3e845
platforms: cosmetic cleanups.
2020-04-09 23:05:13 +02:00
df5de8816d
platforms/ulx3s: cleanup, fix user_leds, add PULLMODE/DRIVE constraints on SDRAM.
2020-04-09 18:53:06 +02:00
467b14a0ad
colorlight_5a_75b: minor comment changes.
2020-04-09 08:14:17 +02:00
15a27d40fa
targets/colorlight_5a_75b: Change baudrate to work on v6.1
...
There seems to be some capacitance on KEY+, so the usual 115200 don't work
2020-04-09 05:08:23 +02:00
4fc9df8414
colorlight_5a_75b/v6.1: Add eth_clock & serial pins
2020-04-09 05:06:08 +02:00
4ddde31429
colorlight_5a_75b/v6.1: Fix bank activate pin
2020-04-09 05:05:29 +02:00
9b3f16af1e
Merge pull request #62 from ilya-epifanov/ecp5-evn-button1-and-spi-flash-ios
...
ECP5-EVN board: Added BUTTON_1 and SPI flash pins to IOs
2020-04-08 09:00:12 +02:00
db67dff0ea
targets/de10lite: use Max10PLL, remove 50MHz limitation.
2020-04-08 08:55:30 +02:00
8ccab03358
targets/c10lprefkit: use Cyclone10LPPLL, remove 50MHz limitation.
2020-04-08 08:34:59 +02:00
4cdc121327
targets/de10nano: use CycloneVPLL, remove 50MHz limitation.
2020-04-08 08:11:04 +02:00
enjoy-digital
David Shah
DerFetzer
Piense
connorwk
Pawel Sagan
Pepijn de Vos
rob-ng15
Jędrzej Boczar
Vamsi K Vytla
Greg Davill
Owen Kirby
Kamil Rakoczy
Raptor Engineering Development Team
Vadim Kaushan
Gabriel Somlo
Skip Hansen
Vamsi K Vytla
Tommy Thorn
Ilya Epifanov
Dave Marples
Staf Verhaegen
David Sawatzke