Florent Kermarrec
|
ee28d7b5ec
|
targets/ulx3s/add_oled: simplify.
|
2020-08-04 12:31:15 +02:00 |
Pepijn de Vos
|
eba70377b7
|
add optional OLED peripheral to ULX3S target
|
2020-08-04 11:07:30 +02:00 |
|
Florent Kermarrec
|
5fd3e8dbcd
|
ecpix5: add SDCard.
Validated with Linux-on-LiteX-VexRiscv.
|
2020-07-28 17:45:49 +02:00 |
|
Florent Kermarrec
|
94ccf1dd3e
|
targets/trellisboard: simplify clocking when no DDR3, remove firmware_ram (was here for debug).
|
2020-07-27 16:31:46 +02:00 |
|
Florent Kermarrec
|
eb8a484032
|
targets/de10nano: fix typo.
|
2020-07-26 12:01:11 +02:00 |
|
Florent Kermarrec
|
2cef54a909
|
targets/colorlight_5a_75x: avoid sys_clk_freq of 125MHz with etherbone (no longer required).
This allows creating SoCs with CPU, SDRAM and Etherbone enabled all together.
|
2020-07-26 11:58:42 +02:00 |
|
Florent Kermarrec
|
760b8ff93a
|
arty: improve xy_pmod_io genericity (allow selecting the PMOD) and enable SDCard.
|
2020-07-24 16:29:35 +02:00 |
|
Florent Kermarrec
|
04fc98f834
|
de0nano/ulx3s: add sdram HalfRate support (untested).
|
2020-07-24 16:12:46 +02:00 |
|
Florent Kermarrec
|
d0ca1befa6
|
targets/de10nano/minispartan6: simplify HalfRate support, rename argument to sdram_rate.
|
2020-07-24 16:11:57 +02:00 |
|
enjoy-digital
|
89c5bf43cf
|
Merge pull request #92 from rob-ng15/master
Enable use of HalfRateGENSDRPHY on de10nano
|
2020-07-24 08:49:09 +02:00 |
|
Florent Kermarrec
|
1e1589a514
|
zybo_z7: demonstrate use of PS7 (with --cpu-type=zynq7000).
This uses a pre-generated .xci hosted on github, still need to figure out where the best location for it.
|
2020-07-23 17:45:21 +02:00 |
rob-ng15
|
7cda143250
|
Allow use of HalfRateGENSDRPHY
|
2020-07-23 14:41:35 +01:00 |
|
Florent Kermarrec
|
8a3b453e2f
|
add Zybo Z7 minimal platform/targets: no PS7 support and USB-UART PMOD on JB.
|
2020-07-23 15:26:22 +02:00 |
|
Florent Kermarrec
|
19d0b95867
|
platforms/targets: keep in sync with litex.
|
2020-07-22 08:53:49 +02:00 |
Jędrzej Boczar
|
02f53e6326
|
targets/minispartan6: add support for HalfRateGENSDRPHY
|
2020-07-14 11:01:09 +02:00 |
|
Florent Kermarrec
|
d9595a317e
|
targets/orangecrab: use user_btn as rst_n.
|
2020-07-06 17:49:05 +02:00 |
|
Florent Kermarrec
|
7b1bf9d74a
|
targets: remove sdcard specific clock domain (now generated by the PHY).
|
2020-07-03 20:09:30 +02:00 |
|
Florent Kermarrec
|
31e6997e70
|
sdcard: rename cd_sdcard to cd_sd to avoid unnecessary clock domain.
|
2020-07-01 12:58:48 +02:00 |
|
Florent Kermarrec
|
fe3ea805bc
|
targets/pcie: make pcie optional (--with-pcie) and avoid forcing uart to crossover.
|
2020-06-30 18:44:00 +02:00 |
|
Florent Kermarrec
|
7a48a61605
|
targets: add indentifier on all targets.
|
2020-06-30 18:11:04 +02:00 |
|
Florent Kermarrec
|
fc22e28fe9
|
targets: replace PCIeSoC with BaseSoC.
|
2020-06-30 17:41:57 +02:00 |
|
Florent Kermarrec
|
d28a0c4258
|
targets/pcie: remove DNA/XADC/ICAP that were only on PCIe targets.
DNA/XADC/ICAP are demonstrated in LitePCIe repository and should probably be added with
a add_xy method.
|
2020-06-30 17:37:24 +02:00 |
|
Florent Kermarrec
|
e91a5d6b82
|
targets/pcie: remove soft reset.
|
2020-06-30 17:28:13 +02:00 |
|
Florent Kermarrec
|
1356ebb416
|
targets/ecp5: update clocking on boards with DDR3 to use reset from ddrphy.init and use primary clock for Power on reset.
|
2020-06-29 16:42:53 +02:00 |
|
enjoy-digital
|
49973990f3
|
Merge pull request #85 from oskirby/logicbone
Add Logicbone ECP5 board
|
2020-06-29 16:24:15 +02:00 |
Owen Kirby
|
76a32ba8ec
|
Add Logicbone ECP5 board
The Logicbone is an Open Source development board for the Lattice ECP5
being developed at https://github.com/oskirby/logicbone
|
2020-06-27 03:32:47 -07:00 |
|
Florent Kermarrec
|
efe33c9764
|
targets/arty: add fixed sdcard clock and remove sys2x (use NETWORKING interface_type on DDR3).
|
2020-06-25 11:21:24 +02:00 |
|
Florent Kermarrec
|
6753a92296
|
targets: add fixed sdcard clock on boards with SDCard support.
|
2020-06-25 11:20:38 +02:00 |
|
Florent Kermarrec
|
04f6d4463a
|
versa_ecp5: simplify device (LFE5UM5G or LFE5UM) and adapt integrated_rom_size only for Microwatt.
|
2020-06-13 11:17:05 +02:00 |
Raptor Engineering Development Team
|
90092164c8
|
Add device option for ECP5 Versa board
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
|
2020-06-12 18:39:43 -05:00 |
|
Raptor Engineering Development Team
|
b1be5dcc23
|
Fix FTBFS from undersized BIOS ROM region with Microwatt
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
|
2020-06-12 18:39:43 -05:00 |
|
Florent Kermarrec
|
9b45ec0f35
|
de10lite: simplify vga terminal.
|
2020-06-11 19:59:32 +02:00 |
|
Florent Kermarrec
|
85cac7abc0
|
de10nano/Mister: review/simplify.
|
2020-06-11 19:54:55 +02:00 |
|
Florent Kermarrec
|
64372d7876
|
targets/orangecrab: add spi-sdcard and workaround for ValentyUSB.
|
2020-06-11 19:21:44 +02:00 |
|
Florent Kermarrec
|
c94cbae0c0
|
orangecrab: add user_led (RGB leds), DFUProg and --load support.
|
2020-06-11 19:21:40 +02:00 |
|
enjoy-digital
|
9aea2272eb
|
Merge pull request #80 from rob-ng15/master
Use 128mb sdram, uart via i/o port on i/o board and vga terminal via i/o board
|
2020-06-11 18:16:18 +02:00 |
|
Florent Kermarrec
|
45bd50b000
|
targets: rename colorlight_5a_75b to colorlight_5a_75x (since we are now also supporting the 75e).
|
2020-06-10 23:14:37 +02:00 |
|
enjoy-digital
|
ad1693a1ad
|
Merge pull request #82 from Disasm/colorlight-5a-75e
Add Colorlight 5A-75E V7.1 board
|
2020-06-10 23:09:26 +02:00 |
|
Florent Kermarrec
|
94861bbb9a
|
targets/orangecrab: uncomment MT41K512M16.
|
2020-06-10 19:30:07 +02:00 |
Vadim Kaushan
|
0c590abf12
|
Update colorlight_5a_75b target: add 5A-75E board support
|
2020-06-10 03:20:32 +03:00 |
|
rob-ng15
|
485c242f24
|
Use 128mb sdram, uart via i/o port on i/o board and vga terminal via i/o board
|
2020-06-08 11:05:58 +01:00 |
Gabriel Somlo
|
f9a8edb973
|
targets/trellisboard: add initial LiteSDCard support
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
|
2020-06-03 13:41:57 -04:00 |
|
Florent Kermarrec
|
d87a11a9cb
|
targets/pcie: use generate_litepcie_software on all targets with PCIe.
|
2020-06-03 08:30:54 +02:00 |
|
Florent Kermarrec
|
9f83b6e3cf
|
targets/acorn_cle_215: use new generate_litepcie_software functions and add --driver argument to generate driver.
|
2020-06-03 08:20:43 +02:00 |
|
Florent Kermarrec
|
091ec846a1
|
targets/acorn_cle_215: automatically copy software from litepcie and generate headers in kernel directory.
|
2020-06-02 20:09:45 +02:00 |
|
Florent Kermarrec
|
06edf48897
|
targets: rename gateware-toolchain parameter to toolchain.
|
2020-06-02 13:45:05 +02:00 |
|
Florent Kermarrec
|
76df4e39c8
|
targets: simplify Ethernet/Etherbone integration on targets with both.
|
2020-05-29 19:20:27 +02:00 |
|
Florent Kermarrec
|
2e1a816d1f
|
pano_logic_g2: switch to LiteEthPHY and simplify Ethernet/Etherbone.
|
2020-05-29 10:41:35 +02:00 |
|
enjoy-digital
|
33fe308ef0
|
Merge pull request #78 from antmicro/jboc/spd-read
ZCU104: add I2C
|
2020-05-27 14:56:31 +02:00 |
|
Jędrzej Boczar
|
e5578a1ae8
|
zcu104/platform: change I2C number to 0
|
2020-05-27 14:31:22 +02:00 |