Victor Suarez Rovere db77ea5c7a Add tweaks to Arty board to support yosys+nextpnr toolchain		2022-01-24 02:06:34 -03:00
..
1bitsquared_icebreaker.py	icebreaker: Minor fix to usb (add PMOD2 position and fix typo)	2021-06-27 16:00:09 +02:00
1bitsquared_icebreaker_bitsy.py	platforms: Add new 1bitsquared_icebreaker_bitsy platform	2021-06-21 16:17:54 +02:00
__init__.py	…
alchitry_au.py	alchitry_au: new board	2021-09-09 00:03:19 -07:00
alchitry_mojo.py	…
antmicro_datacenter_ddr4_test_board.py	…
antmicro_lpddr4_test_board.py	…
avalanche.py	platforms: cleanup pass to uniformize comments/separators/orders.	2020-11-03 10:48:57 +01:00
berkeleylab_marble.py	…
berkeleylab_marblemini.py	…
camlink_4k.py	…
colorlight_5a_75b.py	colorlight_5a_75b: Comment out eth's rst_n (Prevent CPU boot).	2022-01-17 08:30:10 +01:00
colorlight_5a_75e.py	…
colorlight_i5.py	…
decklink_intensity_pro_4k.py	…
decklink_mini_4k.py	…
decklink_quad_hdmi_recorder.py	…
digilent_arty.py	…
digilent_arty_s7.py	…
digilent_arty_z7.py	adding digilent_arty_z7 support	2021-12-20 18:02:57 +01:00
digilent_atlys.py	…
digilent_basys3.py	…
digilent_cmod_a7.py	…
digilent_genesys2.py	…
digilent_nexys4.py	…
digilent_nexys4ddr.py	platforms/digilent_nexys4ddr: Fix INTERNAL_VREF voltage (0.900v instead of 0.750v).	2021-07-27 12:29:42 +02:00
digilent_nexys_video.py	…
digilent_pynq_z1.py	digilent_pynq_z1: Do minor cosmetic cleanups.	2022-01-14 09:39:42 +01:00
digilent_zedboard.py	zedboard: compress bitstream, derive default clk f	2021-12-22 03:13:30 +01:00
digilent_zybo_z7.py	…
ebaz4205.py	…
efinix_titanium_ti60_f225_dev_kit.py	efinix_titanium_ti60_f225_dev_kit: Cleanup HyperRAM IOs.	2022-01-04 15:52:42 +01:00
efinix_trion_t20_bga256_dev_kit.py	efinix: add bank voltage configuration to platforms	2021-12-08 18:10:22 +01:00
efinix_trion_t20_mipi_dev_kit.py	…
efinix_trion_t120_bga576_dev_kit.py	efinix: add clock pins to t120 bga576 platform	2021-12-21 12:34:19 +01:00
efinix_xyloni_dev_kit.py	efinix_xyloni_dev_kit: Switch to openFPGALoader to load bitstream.	2021-10-25 12:49:48 +02:00
ego1.py	…
enclustra_mercury_kx2.py	enclustra_mercury_kx2: Comment user_led2/3 (Conflicting with DRAM pins).	2021-06-16 11:54:52 +02:00
enclustra_mercury_xu5.py	…
fairwaves_xtrx.py	…
fpc_iii.py	platforms/fpc_iii: avoid dummy pin on ethernet.rst_n.	2021-01-29 09:33:33 +01:00
gsd_butterstick.py	gsd_butterstick: Add optional SYZYGY GPIO (--with-syzygy-gpio) to expose the 32 GPIOs on SYZYGY breakout board.	2022-01-06 18:37:42 +01:00
gsd_orangecrab.py	…
hackaday_hadbadge.py	platforms/targets: Add mode Vendor prefixes.	2021-03-25 16:19:11 +01:00
jungle_electronics_fireant.py	…
kosagi_fomu_evt.py	…
kosagi_fomu_hacker.py	…
kosagi_fomu_pvt.py	…
kosagi_netv2.py	…
krtkl_snickerdoodle.py	…
lambdaconcept_ecpix5.py	…
lattice_crosslink_nx_evn.py	…
lattice_crosslink_nx_vip.py	boards: Add Vendor prefix to platforms/targets name when useful and when multiple boards from the same vendor. (With Retro-Compat on the imports).	2021-03-25 14:11:17 +01:00
lattice_ecp5_evn.py	boards: Add Vendor prefix to platforms/targets name when useful and when multiple boards from the same vendor. (With Retro-Compat on the imports).	2021-03-25 14:11:17 +01:00
lattice_ice40up5k_evn.py	…
lattice_machxo3.py	boards: Add Vendor prefix to platforms/targets name when useful and when multiple boards from the same vendor. (With Retro-Compat on the imports).	2021-03-25 14:11:17 +01:00
lattice_versa_ecp5.py	…
linsn_rv901t.py	platforms: cleanup pass to uniformize comments/separators/orders.	2020-11-03 10:48:57 +01:00
litex_acorn_baseboard.py	…
logicbone.py	…
marble.py	…
marblemini.py	…
micronova_mercury2.py	…
mist.py	…
mnt_rkx7.py	…
muselab_icesugar.py	icesugar: map the usb port	2021-05-08 07:34:10 +07:00
muselab_icesugar_pro.py	…
myminieye_runber.py	…
numato_aller.py	…
numato_mimas_a7.py	boards: Add Vendor prefix to platforms/targets name when useful and when multiple boards from the same vendor. (With Retro-Compat on the imports).	2021-03-25 14:11:17 +01:00
numato_nereid.py	…
numato_tagus.py	boards: Add Vendor prefix to platforms/targets name when useful and when multiple boards from the same vendor. (With Retro-Compat on the imports).	2021-03-25 14:11:17 +01:00
pano_logic_g2.py	…
qmtech_5cefa2.py	qmtech-boards: fix serial so that it gets replaced by daughterboard serial correctly	2021-11-06 06:49:25 +07:00
qmtech_10cl006.py	…
qmtech_daughterboard.py	…
qmtech_ep4cex5.py	…
qmtech_wukong.py	…
qmtech_xc7a35t.py	platforms: Remove useless symbiflow import.	2022-01-17 08:25:00 +01:00
quicklogic_quickfeather.py	…
qwertyembedded_beaglewire.py	…
radiona_ulx3s.py	…
redpitaya.py	…
rz_easyfpga.py	…
saanlima_pipistrello.py	platforms/targets: Add mode Vendor prefixes.	2021-03-25 16:19:11 +01:00
scarabhardware_minispartan6.py	platforms/targets: Add mode Vendor prefixes.	2021-03-25 16:19:11 +01:00
seeedstudio_spartan_edge_accelerator.py	spartan_edge_accelerator: Review/Simplify.	2022-01-06 09:37:46 +01:00
siglent_sds1104xe.py	…
sipeed_tang_nano.py	Fix tang nano loopback and button	2021-10-16 04:35:23 +02:00
sipeed_tang_nano_4k.py	sispeed_tang_nano_4k: Avoid IOStandard constraints on HyperRAM (Not present in example designs).	2021-09-20 11:46:10 +02:00
sipeed_tang_nano_9k.py	sipeed_tang_nano_9k: enable copackaged PSRAM	2022-01-23 03:37:03 +08:00
sipeed_tang_primer.py	added comments	2021-11-23 14:58:08 +01:00
sqrl_acorn.py	platforms/sqrl_acorn: Add Multiboot Operational/Fallabck bistreams generation.	2021-11-21 19:10:21 +01:00
sqrl_fk33.py	boards: Add Vendor prefix to platforms/targets name when useful and when multiple boards from the same vendor. (With Retro-Compat on the imports).	2021-03-25 14:11:17 +01:00
sqrl_xcu1525.py	…
terasic_de0nano.py	boards: Add Vendor prefix to platforms/targets name when useful and when multiple boards from the same vendor. (With Retro-Compat on the imports).	2021-03-25 14:11:17 +01:00
terasic_de1soc.py	…
terasic_de2_115.py	…
terasic_de10lite.py	boards: Add Vendor prefix to platforms/targets name when useful and when multiple boards from the same vendor. (With Retro-Compat on the imports).	2021-03-25 14:11:17 +01:00
terasic_de10nano.py	boards: Add Vendor prefix to platforms/targets name when useful and when multiple boards from the same vendor. (With Retro-Compat on the imports).	2021-03-25 14:11:17 +01:00
terasic_deca.py	…
terasic_sockit.py	terasic_sockit: Review/Cleanup for consistency with other boards.	2021-03-26 22:39:19 +01:00
tinyfpga_bx.py	…
trellisboard.py	trellisboard: Add PMOD GPIO support (for tests with MicroPython).	2021-10-11 11:33:13 +02:00
trenz_c10lprefkit.py	Use Arrow-USB-Blaster for trenz c10lprefkit	2022-01-16 18:03:40 +01:00
trenz_cyc1000.py	CYC1000: Add initial support of CYC1000 board	2021-05-22 21:17:27 +02:00
trenz_max1000.py	trenz_max1000: Review/Cleanup.	2021-06-16 18:04:55 +02:00
trenz_te0725.py	Add Trenz te0725 initial board support.	2021-04-12 08:16:45 +02:00
trenz_tec0117.py	Fix cannot find board bug	2021-12-27 21:07:16 +01:00
tul_pynq_z2.py	…
xilinx_ac701.py	…
xilinx_alveo_u250.py	boards: Add Vendor prefix to platforms/targets name when useful and when multiple boards from the same vendor. (With Retro-Compat on the imports).	2021-03-25 14:11:17 +01:00
xilinx_alveo_u280.py	…
xilinx_kc705.py	…
xilinx_kcu105.py	platforms/xilinx_kcu105: Add Pmod0/1 connectors.	2021-04-19 15:11:43 +02:00
xilinx_sp605.py	boards: Add Vendor prefix to platforms/targets name when useful and when multiple boards from the same vendor. (With Retro-Compat on the imports).	2021-03-25 14:11:17 +01:00
xilinx_vc707.py	…
xilinx_vcu118.py	boards: Add Vendor prefix to platforms/targets name when useful and when multiple boards from the same vendor. (With Retro-Compat on the imports).	2021-03-25 14:11:17 +01:00
xilinx_zcu104.py	boards: Add Vendor prefix to platforms/targets name when useful and when multiple boards from the same vendor. (With Retro-Compat on the imports).	2021-03-25 14:11:17 +01:00
xilinx_zcu106.py	…
ztex213.py	Support file for the ZTEX USB-FPGA Module 2.13	2021-01-30 05:19:18 -05:00