321dd8fcf6
versa_ecp5: Remove negative diff IO pins
...
In Lattice FPGAs only the positive side of differential pairs should
be specified (unlike Xilinx)
These are a warning on Diamond (which trims unused IO) and an error
with Yosys/nextpnr (which doesn't so they conflict when the positive
pin is 'expanded').
Already this is the case for the clock input, this commit performs
the same change for the DDR3 pins.
2019-02-22 12:12:10 +00:00
c03b1ad13a
platforms/versa_ecp5: add ddram pins
2019-02-20 22:45:19 +01:00
ff155a474d
soc/tools/remote/comm_uart: be sure to flush in waiting bytes before read and write
2019-02-16 00:08:24 +01:00
d3ecdd9995
soc/cores/clock: add actual clk_freqs to config
2019-02-14 10:41:27 +01:00
af52842fbb
soc_sdram: add use_full_memory_we parameter to allow disabling vivado workaround on small l2 caches
2019-02-12 12:12:40 +01:00
32543430c0
build/lattice/common/LatticeECXTrellisImpl: add support for nbits == 1
2019-02-11 19:41:12 +01:00
aabf042d38
soc_sdram: don't generate sdram initialization error message when integrated_main_ram is used
2019-02-11 09:23:39 +01:00
f51ad43607
build/lattice/common: add LatticeiCE40DDROutput
2019-02-07 16:23:55 +01:00
22ccf9ddf1
platforms/nexys_video: add LPC transceivers pins
2019-02-01 23:39:17 +01:00
1d9c55888f
build/sim: add jtagremote module (thanks LamdaConcept)
2019-01-30 14:01:19 +01:00
57b8bdd530
soc/integration/soc_core: allow disabling wishbone timeout
2019-01-29 12:47:11 +01:00
05dcb5cadc
soc/interconnect/wishbone: increase bus error timeout to 1e6 cycles
2019-01-27 08:28:01 +01:00
02708d3b0f
boards/platform/kc705: add sfp pins (both tx and rx)
2019-01-23 08:40:47 +01:00
8344a6a4ef
soc/cores/clock: add USIDELAYCTRL
2019-01-22 12:50:05 +01:00
7e0dd37616
soc/integration/soc_sdram: round port.data_width/l2_size to nearest power of 2 when it's not the case
...
With ECC configurations, native port data_width is not necessarily a power of 2.
2019-01-22 09:08:35 +01:00
871b958f85
boards/targets: improve presentation
2019-01-21 10:40:41 +01:00
a318343afb
boards/platforms/kcu105: add si570_refclk
2019-01-21 10:40:37 +01:00
48312890e5
boards/platforms/kc705: use vivado as default programmer
2019-01-21 10:40:32 +01:00
1b23890e0d
soc/cores/clock: allow ClockSignal to be used for clkin
2019-01-16 22:05:52 +01:00
387ee04130
build/sim/core: fix coverage
2019-01-11 15:01:58 +01:00
482abf9b43
build/sim/core: set -Wno-BLKANDNBLK (prevent blocking/non-blocking assigns on a same structure in system verilog)
2019-01-11 13:51:15 +01:00
9c5f654773
build/sim/core: set unroll-count to 256 to prevent Error-BLKLOOPINIT
2019-01-11 13:39:09 +01:00
f132012de1
build/sim: disable Warning-WIDTH
2019-01-10 16:03:09 +01:00
7c67bac723
soc/cores/cpu/vexriscv: set default variant to None in add_sources
2019-01-09 10:28:24 +01:00
648015d78e
soc/cores/cpu/vexriscv: move verilog variant selection to add_sources
2019-01-09 09:19:40 +01:00
2b5a6f1058
targets/kcu105: use USMMCM
2019-01-08 14:14:28 +01:00
86e19e6232
targets: pass speedgrade to S7PLL/S7MMCM
2019-01-08 13:50:12 +01:00
2581a00380
soc/cores/clock: add Xilinx Ultrascale PLL/MMCM
2019-01-08 13:21:53 +01:00
68e1dfca28
boards: avoid duplicating platforms that can be found in migen/litex-buildenv
...
The platforms that are kept are the ones used for litex development.
2019-01-06 19:01:19 +01:00
041bf41226
soc/integration/cpu_interface: generate name for Memories in get_csr_header
2019-01-05 10:57:37 +01:00
9f5d0cef6b
utils/litex_server: allow specify uart_baudrate as float
2019-01-03 10:38:14 +01:00
2c43f6f7dc
targets/ulx3s: use pll for phase shift, enable refresh, memtest ok
2018-12-28 15:58:28 +01:00
5ef4d09caa
targets/versa_ecp5: use pll for phase shift, enable refresh, memtest ok
2018-12-28 15:39:20 +01:00
9c801fbe50
soc/cores/clock/ECP5PLL: add basic phase support
2018-12-28 15:03:12 +01:00
a7b5b9d212
litex_sim: simplify, change sdram module and enable sdram refresh.
2018-12-27 20:36:50 +01:00
a7378a721c
.gitmodules: use our copy of tapcfg since https://github.com/nizox/tapcfg no longer exists.
2018-12-23 19:47:48 +01:00
2deffd8c8a
build/sim/verilator: compile sim just before running and not when building.
2018-12-21 09:59:34 +01:00
291843ee76
Merge pull request #144 from mithro/nextpnr-migen-update
...
Integrate latest migen changes for lattice/icestorm.
2018-12-20 11:35:42 -08:00
53731b792b
Integrate latest migen changes for lattice/icestorm.
...
Integrated up to 37db6bb52532b6d1c6bc8b724c2e8c6a38546c2a.
2018-12-20 11:33:19 -08:00
180912a7a3
build/sim: handle verilog $finish and if coverage is enabled, write report at the end of the simulation.
2018-12-20 10:38:40 +01:00
b6c98cab0d
platforms/kcu105: change internal vref to 0.84v (recommended value for ddr4)
2018-12-19 11:33:32 +01:00
ebe0d567f8
bios/sdram: only show read delays when they are valid.
2018-12-19 11:19:47 +01:00
67a2590235
bios/sdram: reduce write leveling scan range
2018-12-19 11:18:19 +01:00
fe5cef4294
soc/cores/clock: remove return on S7PLL.create_clkout
2018-12-19 09:14:26 +01:00
eda1a83ea9
platforms/kcu105: set internal vref on ddr4 banks
2018-12-18 21:38:23 +01:00
a27b5a3be1
update Ultrascale DDRPHY
2018-12-18 11:25:21 +01:00
1c1c1bd122
Merge pull request #141 from mithro/xst-fix
...
Fix `-vlgincdir` for xst.
2018-12-17 21:24:15 -08:00
8b2abc7e89
Fix `-vlgincdir` for xst.
...
The command line is of the form;
```
-vlgincdir {"path1" "path2"}
```
Fixes the following error;
```
WARNING:Xst:3164 - Option "-vlgincdir" found multiple times in the command line. Only the first occurence is considered.
```
2018-12-17 21:11:14 -08:00
f8f3683aaa
bios/sdram: reduce scans verbosity on ultrascale
2018-12-17 16:00:44 +01:00
efce434aa9
bios/sdram: use ddrphy_half_sys8x_taps_read() for KUSDDRPHY
2018-12-17 11:43:21 +01:00
David Shah
Florent Kermarrec
Tim Ansell