df23431d77
framebuffer: work around dysfunctional Xst retiming
2013-06-13 09:41:17 +02:00
1ec1fb9ebe
bus/lasmibus/Crossbar: support cba_shift=0
2013-06-11 18:15:49 +02:00
1c8ef0fe3e
dvisampler/dma: buffer full memory words
2013-06-11 18:15:16 +02:00
ce2f08844a
s6ddrphy: fix read latency
2013-06-11 16:02:34 +02:00
4d0c80ca1a
lasmicon: fix computation of interface latencies
2013-06-11 15:27:05 +02:00
422c9a1db9
lasmi: reduce latencies by 1 cycle
2013-06-11 15:26:47 +02:00
91d7b656a9
Switch to LASMI, bug pandemonium
2013-06-11 14:18:16 +02:00
6f2c05d436
microudp: fix compilation warning
2013-06-11 14:03:39 +02:00
fe54c68762
lasmi: fix minor problems
2013-06-10 22:49:33 +02:00
aea3b59432
genlib/fsm: fix handling of zero delayed_enter
2013-06-10 22:49:05 +02:00
3a284b9c1e
actorlib: LASMI DMA (untested)
2013-06-10 22:29:39 +02:00
932bfa7e75
bus: Wishbone -> LASMI bridge (untested)
2013-06-10 18:52:07 +02:00
9f560cb758
examples/sim: add LASMI demo
2013-06-09 23:36:51 +02:00
f2e2397c9d
bus/lasmibus: bugfixes
2013-06-09 23:36:32 +02:00
a836cba790
bus/lasmibus: add target and initiator
2013-06-09 16:03:22 +02:00
2948f6a16a
examples/sim: rename abstract_transactions to abstract_transactions_wb, use new APIs, remove ASMI
2013-06-09 14:17:30 +02:00
35f9f2e9d7
bus/lasmi: interface definition and crossbar (untested)
2013-06-08 15:49:50 +02:00
85813b3b58
csr/sram: fix reads on high addresses when word_bits != 0
2013-06-03 21:52:23 +02:00
e5e3492afe
csr/sram: fix page_bits computation
2013-06-03 21:51:44 +02:00
5c298f406c
simplify signals connexion
2013-06-02 15:15:47 +02:00
953e603915
xilinx_ise: improve parameter passing
2013-06-01 17:22:57 +02:00
45cfdf41fc
New simplified flash layout + build flashable images for SoC and videomixer
2013-06-01 17:20:40 +02:00
cbd621ef2c
software/stdlib: fix atoi
2013-05-31 14:44:52 +02:00
7c95d253d9
software/videomixer: improve phase calibration
2013-05-30 21:40:16 +02:00
30f5ef8895
software/videomixer: remove unneeded DCM resets
2013-05-30 21:39:56 +02:00
084aa64a2a
dvisampler/clocking: remove DCM_CLKGEN
2013-05-30 21:38:45 +02:00
6d71e09281
cif: move to milkymist folder
2013-05-30 21:38:21 +02:00
cebfe787db
genlib/misc: fix import
2013-05-30 18:46:52 +02:00
ebbd5ebcd2
bus/csr/SRAM: better handling of writes to memories larger than the CSR width
2013-05-30 18:45:04 +02:00
f0b0942055
bitreverse: fhdl/tools -> genlib/misc
2013-05-30 18:44:37 +02:00
548f2685bb
platform/rhino: rename ismm data out signal to locked
2013-05-30 11:06:02 +02:00
b6448ba5fc
bios: remove rescue
2013-05-28 16:15:30 +02:00
701aac2513
bios/linker.ld: flash -> rom
2013-05-28 16:15:17 +02:00
fdb021c992
dvisampler: increase frequency of reports to avoid missing WER values
2013-05-28 16:15:00 +02:00
bac62a32a9
Make memory ports part of specials
...
This is needed to handle cases where a single memory has ports
in two different modules, and one of these modules is subject
to clock domain remapping. The clock domain of the port in that
module only must be remapped.
2013-05-28 16:11:34 +02:00
fb3e61230b
Use new memory port API
2013-05-28 15:56:14 +02:00
759858f739
Use migen.fhdl.std
2013-05-26 18:07:26 +02:00
c13e573e9f
Require Python 3.3
2013-05-26 18:02:18 +02:00
70ffe86356
New migen.fhdl.std to simplify imports + len->flen
2013-05-22 17:11:09 +02:00
611c4192b1
Use migen.fhdl.std
2013-05-22 17:10:13 +02:00
5208baada8
bus/wishbone/SRAM: support init and read_only
2013-05-19 20:53:54 +02:00
7ada0159fd
bus/csr/SRAM: support init
2013-05-19 20:53:37 +02:00
e272e68fac
platforms/papilio_pro: swap tx/rx to be consistent with M1
2013-05-19 20:24:47 +02:00
3eb41f73e6
Simplify system ID
2013-05-19 19:44:00 +02:00
d487dc607f
software: add nofloat libbase for size-optimized binaries
2013-05-19 12:41:40 +02:00
fb6cd481f0
dvisampler: report the word error rate
2013-05-16 22:38:55 +02:00
45797f9132
framebuffer: saturate instead of overflow
2013-05-16 17:45:21 +02:00
a39bf8ca7b
software/videomixer: support additive blending (enable with SW1, status on LED)
2013-05-16 17:44:49 +02:00
ac64701e19
software/videomixer: better pot calibration
2013-05-16 17:43:56 +02:00
71cc2db867
Add GPIO buttons and LEDs
2013-05-16 17:43:20 +02:00
Sebastien Bourdeauducq
Kenneth Ryerson
Florent Kermarrec