00f973ea35
spi_flash: extend non-bitbanged flash support
...
This commit adds support for memory mapped writes
in the same configuration as memory mapped reads
are currently supported.
It also adds support for accessing registers
and erasing sectors in non-bitbanged single SPI
mode.
2020-04-28 15:02:55 +02:00
56aa7897df
create first release, add CHANGES and note about Python modules in README.
2020-04-28 11:36:44 +02:00
6d0896de1d
cpu/serv: switch to pythondata package instead of local git clone.
2020-04-28 10:34:39 +02:00
1b06926882
README: update Python minimal version to 3.6.
2020-04-28 09:02:59 +02:00
ff61b1f6fa
litex_setup: disable automatic clone of BlackParrot/Microwatt CPUs, reorder LiteX data.
...
The support is not fully finished, so let the user install the pythondata for these CPUs manually with pip.
2020-04-28 09:01:06 +02:00
4d86ab9ded
Merge pull request #399 from mithro/litex-sm2py
...
Converting LiteX to use Python modules.
2020-04-28 08:34:19 +02:00
5ef869b9eb
soc/cpu: add memory_buses to cpus and use them in add_sdram.
...
This allows the CPU to have direct buses to the memory and replace the Rocket specific code.
2020-04-27 23:53:52 +02:00
467fee3e23
soc/cpu: rename cpu.buses to cpu.periph_buses.
2020-04-27 23:08:15 +02:00
317ea7edd1
Merge branch 'master' into litex-sm2py
2020-04-27 22:24:10 +02:00
05815c4ecc
Merge pull request #477 from shuffle2/patch-1
...
diamond: fix include paths
2020-04-27 21:07:27 +02:00
f71014b9fb
diamond: fix include paths
...
include paths given via tcl script need semicolon separators and forward slash as directory separator (even on windows)
2020-04-27 11:14:18 -07:00
4dece4ce24
soc/cpu: simplify integration of CPU without interrupts (and automatically use UART_POLLING mode in this case).
2020-04-27 19:06:16 +02:00
c5ef9c7356
Merge pull request #473 from fjullien/memusage
...
bios: print memory usage
2020-04-27 18:24:43 +02:00
3892d7a90a
bios: print memory usage
...
Print memory usage during the compilation of bios.elf.
2020-04-27 16:33:34 +02:00
9460e048ec
tools/litex_sim: use similar analyzer configuration than wiki.
2020-04-27 16:10:41 +02:00
443cc72d0a
Merge pull request #476 from enjoy-digital/serv
...
Add SERV support (The SErial RISC-V CPU)
2020-04-27 13:59:28 +02:00
1d1a4ecd28
software/irq: cleanup and make explicit that irqs are not supported with Microwatt and SERV, fix compilation warning.
2020-04-27 13:47:13 +02:00
fb9e369a19
serv: connect reset.
2020-04-27 13:26:45 +02:00
c4c891dec5
build/icestorm: add verilog_read -defer option to yosys script (changes similar the ones applied to trellis).
2020-04-27 13:17:53 +02:00
192849f0b6
Merge pull request #475 from gregdavill/read_verilog_defer
...
build/trellis: add verilog_read -defer option to yosys script
2020-04-27 13:13:37 +02:00
642c4b3036
build/trellis: add verilog_read -defer option to yosys script
2020-04-27 20:10:25 +09:30
71778ad226
serv: update copyrights (Greg Davill found the typos/issues).
2020-04-27 10:27:44 +02:00
1f9db583fd
serv/cores: fix verilog top level (use serv_rf_top instead of serv_top), working :).
2020-04-26 21:05:47 +02:00
2efd939d06
serv: fix ibus/dbus byte/word addressing inconsistency, add missing ibus.sel (thanks @GregDavill).
2020-04-26 16:26:57 +02:00
96e7e6e89a
bios/sdram: reduce number of scan loops during cdly scan to speed it up.
2020-04-25 12:51:33 +02:00
43e1a5d67d
targets/kcu105: use cmd_latency=1.
2020-04-25 12:12:27 +02:00
85a059bf77
bios/sdram: add some margin on cdly ideal_delay, do the read_leveling even if write_leveling is not optimal.
...
We need to provide enough information to ease support and understand the issue. The write leveling/read leveling
are doing there best to calibrate the DRAM correctly and memtest gives the final result.
2020-04-25 12:11:10 +02:00
038e1bc048
targets/kc705: manual DDRPHY_CMD_DELAY no longer needed.
2020-04-25 11:03:04 +02:00
aaed4b9475
bios/sdram: review/cleanup Command/Clock calibration, set window at the start instead of middle.
...
Working on KC705 that previously required manual adjustment.
2020-04-25 11:00:21 +02:00
33c7b2ce6b
Merge pull request #472 from antmicro/jboc/sdram-calibration
...
bios/sdram: add automatic cdly calibration during write leveling
2020-04-25 09:59:08 +02:00
4608bd1864
Merge pull request #470 from antmicro/jboc/sdram-eeprom-timings
...
litex_sim: add option to create SDRAM module from SPD data
2020-04-25 08:27:00 +02:00
a344e20b5e
spi_flash: fix building without bitbang
2020-04-24 17:45:17 +02:00
ab92e81e31
bios/sdram: add automatic cdly calibration during write leveling
2020-04-24 14:00:42 +02:00
22c3923644
initial SERV integration.
2020-04-23 08:18:41 +02:00
0b3c4b50fa
soc/cores/spi: add optional aligned mode.
...
In aligned mode, MOSI and MISO bits are located on the LSBs and first transmitted MOSI bit is length - 1 bit.
2020-04-22 13:15:51 +02:00
6bb22dfe6b
cores/spi: simplify.
2020-04-22 12:20:23 +02:00
fc434af949
build/lattice/common: add specific LatticeiCE40SDROutputImpl/LatticeiCE40SDRTristateImpl (thanks @tnt).
2020-04-22 12:01:23 +02:00
1457c32052
xilinx/common: use a common SDRTristate implementation for Spartan6, 7-Series and Ultrascale.
2020-04-22 10:42:06 +02:00
69462e6669
build/xilinx/common: add 7-Series/Ultrascale SDROutput/Input.
2020-04-22 10:33:22 +02:00
65e6ddc6cd
lattice/common: add LatticeECP5DDRInput.
2020-04-22 10:13:28 +02:00
2031f28057
lattice/common: cleanup instances, simplify tritates.
2020-04-22 09:07:38 +02:00
2d25bcb09c
lattice/common: add LatticeiCE40DDRInput, LatticeiCE40SDROutput and LatticeiCE40SDRInput.
2020-04-22 09:07:33 +02:00
56e1528455
platforms/de0nano: swap serial tx/rx to ease use of cheap FT232 based cables.
2020-04-18 11:38:24 +02:00
08e4dc02ec
tools/remote/etherbone: update import.
2020-04-17 21:30:33 +02:00
b0f8ee9876
litex_sim: add option to create SDRAM module from SPD data
2020-04-17 14:52:53 +02:00
19f983c420
targets: manual define of the SDRAM PHY no longer needed.
2020-04-16 11:26:59 +02:00
c0f3710d66
bios/sdram: update/simplify with new exported LiteDRAM parameters.
2020-04-16 10:42:01 +02:00
3915ed9760
litex_sim: add phytype to PhySettings.
2020-04-16 10:22:43 +02:00
c0c5ae558a
build/generic_programmer: move requests import to do it only when needed.
2020-04-16 08:44:36 +02:00
c9ab593989
bios/sdram/ECP5: set ERR_DDRPHY_BITSLIP to 4.
...
Bitslip software control is now used on ECP5 to move dqs_read.
2020-04-15 19:30:28 +02:00
Jakub Cebulski
Florent Kermarrec
shuffle2
Franck Jullien
Greg Davill
Jędrzej Boczar