38e46bb3d3
build/DFUProg: Allow to specify alt interface and to not reboot
...
Some targets have multiple alt settings for DFU for different zone
of the flash. Allowing to specify which one to flash and not
rebooting immediately allows to flash several of them at once.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2021-06-21 16:12:55 +02:00
d6f24f2f68
cores/uart/RS232ClkPhaseAccum: Avoid reset on phase signal, improve timings/resources on iCE40.
2021-06-20 14:33:25 +02:00
4c8184fbb6
cores/uart: Fix refactoring typo (tick is a 1-bit Signal), thanks @tnt.
2021-06-20 08:58:45 +02:00
b58c416a24
cores/clock/ecp5: Add dynamic phase adjustment signals.
2021-06-19 11:24:08 +02:00
e7d04a2d1b
Merge pull request #948 from developandplay/non-interactive
...
Expose non-interactive mode
2021-06-18 13:27:18 +02:00
7d2e19ac26
Enable non-interactive mode
2021-06-18 12:35:42 +02:00
fdb278838c
Merge pull request #881 from developandplay/patch-1
...
Add --non-interactive option to simulation
2021-06-18 10:40:19 +02:00
5205356d24
tools/litex_json2dts: Simplify Switches interrupt support (and make it similar to other interrupts).
2021-06-18 10:36:33 +02:00
291374e66f
Merge pull request #854 from mczerski/gpio_dts_irq
...
dts: gpio: interrupt controller definition for switches
2021-06-18 10:29:30 +02:00
98676162a3
VexRiscv-SMP: Review/Cleanup #906 .
2021-06-18 10:19:27 +02:00
58c533668c
Merge pull request #906 from rdolbeau/extra_config_and_dts
...
Configurable [ID]TLB for VexRiscv & improved DTS
2021-06-18 10:09:28 +02:00
8ce7c583e6
cores/spi: Add Manual CS Mode (to allow doing Bulk Xfers without external changes), also cleanup/simplify a bit CSR descriptions.
2021-06-18 10:07:01 +02:00
ac73474d66
CONTRIBUTORS: Update.
2021-06-17 23:23:06 +02:00
a4be067d91
tools: Add litex_contributors.py script to easily update CONTRIBUTORS file.
2021-06-17 23:04:28 +02:00
7179d88e8c
ram/lattice_nx: Add init parameter and rename method to add_init.
...
When init is not empty, call add_init automatically (similar to Memory).
2021-06-16 18:33:00 +02:00
869b5c24a8
Merge pull request #941 from danc86/nxlram-initval
...
soc/cores/ram: allow populating initial values in Nexus LRAM
2021-06-16 18:31:00 +02:00
b0e6851150
Merge pull request #942 from zyp/external_software_packages
...
Allow external software packages to be linked into the BIOS
2021-06-16 18:21:55 +02:00
aad64bbf9b
Merge pull request #943 from JosephBushagour/jbushagour_getargspec_fix
...
Replace deprecated inspect.getargspec with inspect.getfullargspec.
2021-06-16 14:59:39 +02:00
deda54a9ba
Merge pull request #945 from tcal-x/symbiflow-make
...
Force SymbiFlow 'make' to be non-parallel.
2021-06-16 14:57:36 +02:00
e59530ab50
Force SymbiFlow 'make' to be non-parallel.
...
Signed-off-by: Tim Callahan <tcal@google.com>
2021-06-15 14:49:28 -07:00
8a644c9086
soc/add_video_xy: Allow passing phy or phy's Endpoint.
2021-06-15 18:10:24 +02:00
62ea48940a
Replace deprecated inspect.getargspec with inspect.getfullargspec.
2021-06-15 08:03:11 -05:00
8d527a1f3f
soc/software/bios: Allow registering init functions.
2021-06-13 14:04:34 +02:00
61636f1248
soc/integration/builder: Allow linking in external software packages.
2021-06-13 14:04:34 +02:00
be4c7cfb34
soc/cores/ram: allow populating initial values in Nexus LRAM
...
On designs which use Nexus parts without any external memory, it can be
difficult to fit an embedded ROM program larger than a few KiB. Radiant
cannot infer LRAM, and refuses to infer EBRAM under many circumstances
too, so large memories tend to just consume a huge number of LUTs.
This patch makes it possible to explicitly wire up an LRAM as a ROM,
populate its initial values with a program, and execute directly from
it. That lets us embed programs up to 64KiB.
2021-06-11 16:41:10 +10:00
6b8a35a2f8
Merge pull request #940 from betrusted-io/keyclear_merge
...
breakout the keyclearb pin for integration elsewhere
2021-06-11 04:46:08 +08:00
311b633a11
breakout the keyclearb pin for integration elsewhere
2021-06-11 04:44:39 +08:00
0a932be491
Merge pull request #936 from developandplay/patch-4
...
Sync ROM_BOOT_ADDRESS with main_ram location
2021-06-09 12:11:24 +02:00
d5cfe09f4c
Merge pull request #931 from madscientist159/add-1920-1200-mode
...
Add 1920x1200@60 RBv2 to LiteX video modes
2021-06-09 09:03:57 +02:00
8cdb0b8db3
Merge pull request #932 from developandplay/patch-3
...
Fix base_address for LiteDRAMWishbone2Native
2021-06-09 08:58:28 +02:00
5061a368da
cores/video: Regroup VGA/DVI Phy in VideoGenericPHY and support variations (positive/negative hsync/vsync, etc...)
2021-06-09 08:49:29 +02:00
e0352a1f0f
Sync ROM_BOOT_ADDRESS with main_ram location
...
Rocket and Blackparrot main_ram starts at 0x80000000
Vexriscv main_ram starts at 0x40000000
2021-06-09 03:36:32 +02:00
25ead1ad69
interconnect/stream: Add Gate.
2021-06-08 18:58:08 +02:00
bd1463514b
litex_setup: Remove Travis specific code (CI no longer run on Travis).
2021-06-08 10:49:28 +02:00
f2caeaf83a
Fix base_address for LiteDRAMWishbone2Native
...
Fixes `origin == None` due to https://github.com/litex-hub/litex-boards/commit/ba01776
2021-06-08 00:51:11 +02:00
47c19933fa
Add 1920x1200@60 RBv2 to LiteX video modes Tested on Raptor Sparrowhawk
2021-06-07 14:49:33 -05:00
a064e9d048
soc/interconnect/wishbone: Fix SEL propagation on UpConverter (thanks @Dolu1990).
2021-06-02 10:46:53 +02:00
0b329c3dce
tools/litex_json2dts: Add initial USB OHCI support.
2021-06-01 10:41:35 +02:00
acebc949c6
litex_setup: Add USB OHCI pythondata.
2021-06-01 10:29:49 +02:00
a17ded2ce6
soc/cores: Add initial USB OHCI core wrapper.
2021-06-01 10:28:30 +02:00
6c8e839cef
soc/cores/freqmeter: Minor simplification.
2021-06-01 10:26:27 +02:00
26db10701a
integration/soc/add_video_terminal: Connect UART to TX FIFO instead of Source.
...
Allow UART to be displayed on terminal with Auto TX flush.
2021-05-28 11:11:49 +02:00
ad1fe143cc
cores/uart: Cleanup code and add optional automatic TX Flush.
...
In some SoCs where UART's PHY is managed externally (ex through a Bridge) we don't
necessarily want the UART TX to wait for the PHY to be ready (and then stall the
CPU) but just want to let the CPU print the UART and will just connect when useful
and handle backpressure when connected.
This is now possible by calling add_auto_tx_flush method, ex in the SoC:
self.uart.add_auto_tx_flush(sys_clk_freq)
2021-05-28 11:03:23 +02:00
f6b2135cc9
test/test_timer: Update.
2021-05-27 19:37:51 +02:00
d11dc0b503
libbase/memtest: Print size with 1 digit after the decimal point.
2021-05-27 19:33:29 +02:00
9b85769499
Merge pull request #923 from gsomlo/gls-fix-gcc-warn
...
software/lib*: address gcc warnings
2021-05-27 18:50:24 +02:00
d7f4293743
Merge pull request #924 from developandplay/patch-2
...
Use add_etherbone in simulation
2021-05-27 18:49:45 +02:00
34df454157
cores/timer/uart: Use edge="rising on Timer/UART's EventSourceProcess.
...
Make code easier to understand.
2021-05-27 18:47:40 +02:00
9a24034d1d
software/lib*: address gcc warnings
...
Fix gcc warnings: use 'unsigned long' to represent memory addresses,
and remove 'static' from the definition of 'cdelay()', as it is called
from multiple C files.
2021-05-27 08:47:29 -04:00
c17421bccb
Use add_etherbone in simulation
...
Fixes not working analyzer example from wiki
2021-05-26 23:18:22 +02:00
Sylvain Munaut
Florent Kermarrec
Vegard Storheil Eriksen
developandplay
Tim Callahan
Joey Bushagour
Dan Callaghan
bunnie
Raptor Engineering Development Team
Gabriel Somlo