9cabcf14e9
migen/genlib/record: add leave_out parameter to connect
...
Modules doing dataflow adaptation often need to connect most of the signals between endpoints except the one concerned by the adaptation.
This new parameter ease that by avoid manual connection of all signals.
2015-05-23 13:59:09 +02:00
5390540d3c
example of instance usage
2015-05-20 01:14:42 +08:00
ada131dbe0
vpi: avoid some code duplication between windows and linux
2015-05-13 10:48:08 +02:00
f6624b34f0
migen/actorlib/spi: apply missing CSR renaming
2015-05-13 10:17:31 +02:00
76302d7aa6
vpi: cleanup (thanks sb)
2015-05-13 10:13:14 +02:00
98cf103c65
vpi: fix and simplify windows simulation (ends of msg were ignored)
2015-05-13 03:03:34 +02:00
b0f159421c
Merge branch 'master' of https://github.com/m-labs/migen
2015-05-12 16:16:24 +02:00
88a406ebec
migen/genlib/misc: replace Timeout with WaitTimer from artiq
2015-05-12 16:14:58 +02:00
d9b15e6ef6
cores: replace Timeout with new WaitTimer
2015-05-12 16:14:38 +02:00
9194fe43a1
travis: install conda dependencies after activating the virtual env
2015-05-12 14:06:16 +02:00
c1088f4666
travis: get-anaconda.sh does not take args anymore
2015-05-12 13:58:08 +02:00
a99aa9c7fd
uart: rename wishbone to bridge
2015-05-09 16:24:28 +02:00
fb5397aa82
uart: remove litescope dependency for UARTWishboneBridge and remove frontend
2015-05-09 16:08:20 +02:00
fe6eef7069
Windows simulation support
2015-05-09 21:09:52 +08:00
1fd189512f
liteusb/frontend/dma: remove +4 to length for CRC (we'll do it in core)
2015-05-08 23:10:08 +02:00
99fb0d4619
ise: move -user_new_parser to xst_opt
2015-05-08 11:18:45 +08:00
4d902b578c
liteusb/phy/ft245: rename "ftdi" clock domain to "usb"
2015-05-07 20:03:12 +02:00
d9111f6a04
litesata: fix packets figure in frontend doc
2015-05-07 11:06:05 +02:00
566d973049
README: add note about submodules
2015-05-07 16:29:30 +08:00
5516a49696
litesata: add doc for frontend
2015-05-06 03:57:07 +02:00
6908ddbaf9
litesata: cleanup README/doc
2015-05-06 02:02:22 +02:00
7bdcbc94cd
litesata: use (some) settings from vivado 2015.1, try to follow all ug476 recommendations to initialize GTX (...), remove automatic reset on top.
...
Works fine @ 3Gbps, still not working @6.0Gbps
2015-05-06 01:33:02 +02:00
5d5d5edfe2
spiflash: fix miso bitbang with large DQ
2015-05-06 00:05:25 +08:00
553262bcc1
soc/sdram: Vivado 2015.1 still does not fix issue with L2 cache, update comment...
2015-05-04 12:28:49 +02:00
438a0856c5
misoclib/cpu: merge git.py in identifier
2015-05-02 18:42:33 +02:00
da711ad5f1
liteusb: add simple example design with wishbone bridge and software to control it
2015-05-02 18:21:18 +02:00
c98bd9fd79
rename shadow_address to shadow_base (more appropriate) and use | instead of + (as done in artiq)
2015-05-02 17:07:58 +02:00
145398d874
liteeth/core/mac: minor cleanup
2015-05-02 16:48:57 +02:00
e9ef11620f
liteusb/frontend/wishbone: use new packetized mode (allow grouping response in a single packet)
2015-05-02 16:22:45 +02:00
1761bfba8a
litescope/frontend/wishbone: add support for packetized mode
2015-05-02 16:22:43 +02:00
ff51bde7f0
liteusb/software/wishbone: optimize writes/reads (send a single packet for a command)
2015-05-02 16:22:40 +02:00
e8c01ff4aa
do more test with last changes fix small issues
2015-05-02 16:22:38 +02:00
63b8797978
liteeth: move mac to core
2015-05-02 16:22:35 +02:00
a4617014f4
cores: avoid having too much directories when possible (for simple cores or cores contained in a single file)
2015-05-02 16:22:33 +02:00
3ebe877fd2
use similar names for wishbone bridges and move wishbone drivers to [core]/software
2015-05-02 16:22:30 +02:00
1832f27220
targets/pipistrello: add flash sizes
2015-05-02 09:59:24 +08:00
5e649a6577
litescope: add basic LiteScopeUSB2WishboneFTDIDriver (working but need to be optimized)
2015-05-01 20:45:04 +02:00
c03c41eb77
litescope: rename host directory to software (to be coherent with others cores)
2015-05-01 20:45:02 +02:00
a8b8af220a
liteusb: add basic wishbone frontend (We could also reuse Etherbone in the future)
2015-05-01 20:44:59 +02:00
cd3a51ada6
litescope: fix missing source ack on LiteScopeWishboneBridge
2015-05-01 20:44:57 +02:00
1281a463d6
litescope/bridge: create a generic wishbone bridge that can be used with different phys (the phy needs to provide a sink/source with 8bits data).
...
- we can now pass a phy to LiteScopeWishboneBridge
- LiteScopeUART2Wishbone is only a specific LiteScopeWishboneBridge
- UART mux is removed since complicated and no longer useful (we can now create easily virtual UART over Ethernet, USB or PCIe) or simply add another UART for debug.
2015-05-01 17:51:18 +02:00
23126415d3
litescope: use full name in io.py
2015-05-01 17:49:31 +02:00
23ba1ccb52
targets/minispartan6: add USBSoC (working, should also be usable on pipistrello)
2015-05-01 16:22:45 +02:00
da0fe2ecfb
liteusb: refactor software (use python instead of libftdicom in C) and provide simple example.
...
small modifications to fastftdi.c are also done to select our interface (A or B) and mode (synchronous, asynchronous)
2015-05-01 16:22:26 +02:00
603b4cdc8c
liteusb: continue refactoring (virtual UART and DMA working on minispartan6)
...
- rename ft2232h phy to ft245.
- make crc optional
- fix depacketizer
- refactor uart (it's now only a wrapper around standard UART)
- fix and update dma
2015-05-01 16:11:15 +02:00
8aa3fb3eb7
com/uart: add tx and rx fifos.
...
Since ressource usage is low with default depth of 16 (implemented in RAM LUTs) we don't keep old behaviour.
Tested successfully with BIOS and flterm.
2015-05-01 15:59:26 +02:00
70bc4ecb59
mibuild/platforms/pipistrello: add _n suffix to usb fifo pins
2015-05-01 15:49:33 +02:00
aea7308051
mibuild/platforms/minispartan6: rename ftdi_fifo to usb_fifo and fix rd_n/wr_n swap
2015-05-01 15:48:42 +02:00
01e2343978
doc: remove cordic
2015-05-01 14:07:38 +08:00
96bff77c36
add examples tests
2015-05-01 00:50:17 +08:00
Florent Kermarrec
Guy Hutchison
Yann Sionneau
William D. Jones
Robert Jordens
Sebastien Bourdeauducq
Zach Smith
Alain Péteut