cba4642444
Merge pull request #845 from meklort/meklort/xics-fix
...
xics: Disable endianness swapping
2021-03-11 13:33:15 +01:00
a81d1da980
soc/integration/common: Improve get_mem_data error reporting.
2021-03-11 10:19:36 +01:00
26f55797cc
software/liblitedram: Make sure init_error is set before init_done.
...
Useful for standalone core where the user logic can be looking at init_done/init_error to
condition user accesses.
2021-03-10 19:41:02 +01:00
da1277021a
build/generic_platform: Minor cosmetic cleanups.
2021-03-10 19:21:02 +01:00
10eff37b84
interconnect/axi: Fix AXILiteDownverterWrite/Read base address.
...
Downconverter should start on master's addr, not on aligned master's addr.
2021-03-10 18:54:02 +01:00
08072eb872
xics: Disable endianness swapping
...
The endianess swapping code caused the core to diverge from microwatt resulting in:
- The xics tests not working as-is: https://github.com/antonblanchard/microwatt/blob/master/tests/xics/xics.h
- byte writes writing to the incorrect byte
This removes endianswapping and minimizes the delta from upstream for the xics irq.h header.
2021-03-10 07:39:19 -07:00
c92e4cb3ca
xics: Ass missing static keywords to irq header.
2021-03-10 07:32:24 -07:00
9d08c65e8a
build/generic_platform: Make sure default_clk_period constraint is only applied when default_clk_period exists.
...
In simulation, default_clk_period is not necessarily required.
2021-03-10 12:25:35 +01:00
ee2d373477
Merge pull request #843 from gregdavill/monitor_token_fix
...
cores/stream/monitor: Fix typo
2021-03-10 11:00:55 +01:00
e48b269d77
build/generic_platform: Fix use_default_clk set when not user provided sys_clk.
...
Prevented the default timing constraint to be generated in the timing constraint file.
2021-03-10 10:47:22 +01:00
31cc7f1e42
cores/stream/monitor: Fix typo
2021-03-10 09:11:07 +10:30
0e7d8219ea
soc/cores/gpio: Simplify GPIOIn IRQ, make polarity configurable and also add optional IRQ to GPIOTristate.
...
Ex of instance:
from litex.soc.cores import gpio
gpio_in_pads = Signal(16)
self.submodules.gpio_in = gpio.GPIOIn(gpio_in_pads, with_irq=True)
self.add_csr("gpio_in")
2021-03-09 13:57:48 +01:00
0d8b6f8fbb
csr_eventmanager/EventSourceProcess: Add Rising Edge support and Falling/Rising selection.
2021-03-09 13:55:43 +01:00
ece9005949
cpu/vexriscv/core: Rename timer_enabled parameter to with_timer (for consistency with codebase) and disable timer by default (since increasing resources and causing issue on some iCE40 designs).
2021-03-09 09:07:52 +01:00
834c90b71f
Merge pull request #841 from gatecat/radiant_pins_x
...
build/radiant: Skip location constraint for X pins
2021-03-08 16:30:22 +01:00
c64e2d3a85
build/radiant: Skip location constraint for X pins
...
Signed-off-by: gatecat <gatecat@ds0.me>
2021-03-08 14:27:32 +00:00
5af8e5c934
soc/add_etherbone: Fix UDPIPCore clock domain (should still run at eth_clk even if Etherbone is running in sys_clk) since data-width convertion is done on UDP.
2021-03-08 13:50:22 +01:00
6bb0541f9a
Remove ussysmon.py as it is consolidated inside xadc.py
2021-03-06 14:31:24 -08:00
a1e54671be
sim/serial2console: Remove \r workaround since no longer required and generating double carrier return in simulation.
2021-03-06 17:36:21 +01:00
7e3912aaef
software/demo: Make hellocpp optional (only build with --with-cxx) to avoid adding g++ as a dependency for an optional feature.
2021-03-06 17:31:07 +01:00
647d3eb51a
soc/cores/xadc.py: Move ussysmon here
2021-03-06 08:14:13 -08:00
31ac6659c9
cores/video: Add VideoS7HDMIPHY for Xilinx 7-Series.
2021-03-05 14:30:28 +01:00
9624cce188
cores/video: Mode VideoVGAPHY/VideoDVIPHY and add separators.
2021-03-05 14:27:08 +01:00
0280a9dd57
soc/add_video_framebuffer: Pass clock_domain to VideoFrameBuffer.
2021-03-05 14:23:39 +01:00
8b531b4215
cores: Add code_tmds with TMDS Encoder from Mixxeo/LiteVideo.
2021-03-04 19:32:41 +01:00
10d87e4138
cores/video/VideoPHYs: Use IO primitives.
2021-03-04 18:22:34 +01:00
82d0ecd7bd
cores/video/VideoTerminal: Add CLEAR-XY after reset.
2021-03-04 17:55:37 +01:00
a1e7aab35c
cores/clock/xilinx_usp/USPIDELAYCTRL: Apply USIDELAYCTRL's changes.
2021-03-04 14:42:50 +01:00
60e2d3335f
cores/clock/xilinx_us: Remove USP modules (refactoring issue).
2021-03-04 14:42:03 +01:00
2d5b4b206b
bios: Add VideoFrameBuffer VTG/DMA initialisation.
...
This just configures the enables for now since other parameters are pre-configured
during the build.
2021-03-04 12:01:32 +01:00
f553b5fc83
soc/cores/video: Improve/Cleanup VideoFrameBuffer, disable by default and modify default hres/vres to 800/600.
2021-03-04 11:59:44 +01:00
0ee92448b9
soc/cores/dma: Add default parameters to add_csr (similar to LiteDRAMDMAs), minor cosmetic cleanups and also add offset CSRStatus on WishboneDMAWriter (for symetry with WishboneDMAReader).
...
Defaults parameters can allow the FPGA gateware to behave by itself after initialization while still being configurable by software.
2021-03-04 11:53:43 +01:00
225a518f7e
soc/cores/video: Move LiteDRAMDMAReader import to VideoFramerBuffer to avoid LiteDRAM dependency.
2021-03-04 08:40:47 +01:00
ae5f67f6f0
litex/soc/cores/ussysmon.py: minor bug
2021-03-03 14:47:52 -08:00
1793efb50b
litex/soc/cores/ussysmon.py: dadr address space bump
2021-03-03 14:38:27 -08:00
ccc8916995
soc/cores/video: Add initial (and simple) VideoFrameBuffer core.
2021-03-03 19:58:11 +01:00
922f85e64b
litex/soc/cores/ussysmon.py: ADC transfer function
2021-03-03 10:50:58 -08:00
24fb153fa1
soc/integration: Add add_video_terminal method to LiteXSoC.
...
Adds the new LiteX's VideoTerminal core to the SoC:
self.submodules.videophy = VideoVGAPHY(platform.request("vga"), clock_domain="vga")
self.add_video_terminal(phy=self.videophy, timings="800x600@60Hz", clock_domain="vga")
2021-03-03 17:45:02 +01:00
35ffba8801
soc/cores: Add simple VideoOut core with VideoTimingGenerator, Video Patterns, VideoTerminal, VideoDVIPHY and VideoVGAPHY.
2021-03-03 16:17:12 +01:00
c5ee6741a0
software/liblitedram: Use new DQS delay reset procedure on Ultrascale(+) (by increments).
2021-03-03 11:32:43 +01:00
d3407c67b1
build/sim/core: Cast main_time to vluint64_t to avoid ambiguity error of the dump function to be used.
2021-03-03 09:25:54 +01:00
134c628357
cores/spi_flash: Minor cosmetic cleanups, SpiFlashQuadReadWrite has also been moved to the end with a Note since should probably be re-factored.
2021-03-03 09:15:51 +01:00
61dcd1e8fd
soc/cores/led: Minor cosmetic cleanups.
2021-03-03 09:02:41 +01:00
19b1e50cbd
soc/cores/icap: Minor cosmetic cleanups.
2021-03-03 09:01:41 +01:00
e6f1d677e7
soc/cores/freqmeter: Minor cosmetic cleanups.
2021-03-03 08:59:51 +01:00
ce5e3e3b93
soc/cores/ecc: Minor cosmetic cleanups.
2021-03-03 08:55:37 +01:00
2fd7451fc9
soc/cores/code_8b10b: Minor cosmetic cleanups.
2021-03-03 08:54:31 +01:00
2e531e0ec7
soc/cores/dna: Add separator/comment.
2021-03-03 08:49:47 +01:00
71f7ce6a57
soc/cores/ussysmon.py: Xilinx XADC like thingy for UltraScale devices
2021-03-02 20:31:52 -08:00
c23e8813fc
Merge pull request #836 from hplp/master
...
demo with c++ HW example
2021-03-02 09:13:10 +01:00
enjoy-digital
Evan Lojewski
Greg Davill
gatecat
Vamsi Vytla