Florent Kermarrec
26f55797cc
software/liblitedram: Make sure init_error is set before init_done.
...
Useful for standalone core where the user logic can be looking at init_done/init_error to
condition user accesses.
2021-03-10 19:41:02 +01:00
Florent Kermarrec
da1277021a
build/generic_platform: Minor cosmetic cleanups.
2021-03-10 19:21:02 +01:00
Florent Kermarrec
10eff37b84
interconnect/axi: Fix AXILiteDownverterWrite/Read base address.
...
Downconverter should start on master's addr, not on aligned master's addr.
2021-03-10 18:54:02 +01:00
Evan Lojewski
08072eb872
xics: Disable endianness swapping
...
The endianess swapping code caused the core to diverge from microwatt resulting in:
- The xics tests not working as-is: https://github.com/antonblanchard/microwatt/blob/master/tests/xics/xics.h
- byte writes writing to the incorrect byte
This removes endianswapping and minimizes the delta from upstream for the xics irq.h header.
2021-03-10 07:39:19 -07:00
Evan Lojewski
c92e4cb3ca
xics: Ass missing static keywords to irq header.
2021-03-10 07:32:24 -07:00
Florent Kermarrec
9d08c65e8a
build/generic_platform: Make sure default_clk_period constraint is only applied when default_clk_period exists.
...
In simulation, default_clk_period is not necessarily required.
2021-03-10 12:25:35 +01:00
enjoy-digital
ee2d373477
Merge pull request #843 from gregdavill/monitor_token_fix
...
cores/stream/monitor: Fix typo
2021-03-10 11:00:55 +01:00
Florent Kermarrec
e48b269d77
build/generic_platform: Fix use_default_clk set when not user provided sys_clk.
...
Prevented the default timing constraint to be generated in the timing constraint file.
2021-03-10 10:47:22 +01:00
Greg Davill
31cc7f1e42
cores/stream/monitor: Fix typo
2021-03-10 09:11:07 +10:30
Florent Kermarrec
0e7d8219ea
soc/cores/gpio: Simplify GPIOIn IRQ, make polarity configurable and also add optional IRQ to GPIOTristate.
...
Ex of instance:
from litex.soc.cores import gpio
gpio_in_pads = Signal(16)
self.submodules.gpio_in = gpio.GPIOIn(gpio_in_pads, with_irq=True)
self.add_csr("gpio_in")
2021-03-09 13:57:48 +01:00
Florent Kermarrec
0d8b6f8fbb
csr_eventmanager/EventSourceProcess: Add Rising Edge support and Falling/Rising selection.
2021-03-09 13:55:43 +01:00
Florent Kermarrec
ece9005949
cpu/vexriscv/core: Rename timer_enabled parameter to with_timer (for consistency with codebase) and disable timer by default (since increasing resources and causing issue on some iCE40 designs).
2021-03-09 09:07:52 +01:00
enjoy-digital
834c90b71f
Merge pull request #841 from gatecat/radiant_pins_x
...
build/radiant: Skip location constraint for X pins
2021-03-08 16:30:22 +01:00
gatecat
c64e2d3a85
build/radiant: Skip location constraint for X pins
...
Signed-off-by: gatecat <gatecat@ds0.me>
2021-03-08 14:27:32 +00:00
Florent Kermarrec
5af8e5c934
soc/add_etherbone: Fix UDPIPCore clock domain (should still run at eth_clk even if Etherbone is running in sys_clk) since data-width convertion is done on UDP.
2021-03-08 13:50:22 +01:00
Vamsi Vytla
6bb0541f9a
Remove ussysmon.py as it is consolidated inside xadc.py
2021-03-06 14:31:24 -08:00
Florent Kermarrec
a1e54671be
sim/serial2console: Remove \r workaround since no longer required and generating double carrier return in simulation.
2021-03-06 17:36:21 +01:00
Florent Kermarrec
7e3912aaef
software/demo: Make hellocpp optional (only build with --with-cxx) to avoid adding g++ as a dependency for an optional feature.
2021-03-06 17:31:07 +01:00
Vamsi Vytla
647d3eb51a
soc/cores/xadc.py: Move ussysmon here
2021-03-06 08:14:13 -08:00
Florent Kermarrec
31ac6659c9
cores/video: Add VideoS7HDMIPHY for Xilinx 7-Series.
2021-03-05 14:30:28 +01:00
Florent Kermarrec
9624cce188
cores/video: Mode VideoVGAPHY/VideoDVIPHY and add separators.
2021-03-05 14:27:08 +01:00
Florent Kermarrec
0280a9dd57
soc/add_video_framebuffer: Pass clock_domain to VideoFrameBuffer.
2021-03-05 14:23:39 +01:00
Florent Kermarrec
8b531b4215
cores: Add code_tmds with TMDS Encoder from Mixxeo/LiteVideo.
2021-03-04 19:32:41 +01:00
Florent Kermarrec
10d87e4138
cores/video/VideoPHYs: Use IO primitives.
2021-03-04 18:22:34 +01:00
Florent Kermarrec
82d0ecd7bd
cores/video/VideoTerminal: Add CLEAR-XY after reset.
2021-03-04 17:55:37 +01:00
Florent Kermarrec
a1e7aab35c
cores/clock/xilinx_usp/USPIDELAYCTRL: Apply USIDELAYCTRL's changes.
2021-03-04 14:42:50 +01:00
Florent Kermarrec
60e2d3335f
cores/clock/xilinx_us: Remove USP modules (refactoring issue).
2021-03-04 14:42:03 +01:00
Florent Kermarrec
2d5b4b206b
bios: Add VideoFrameBuffer VTG/DMA initialisation.
...
This just configures the enables for now since other parameters are pre-configured
during the build.
2021-03-04 12:01:32 +01:00
Florent Kermarrec
f553b5fc83
soc/cores/video: Improve/Cleanup VideoFrameBuffer, disable by default and modify default hres/vres to 800/600.
2021-03-04 11:59:44 +01:00
Florent Kermarrec
0ee92448b9
soc/cores/dma: Add default parameters to add_csr (similar to LiteDRAMDMAs), minor cosmetic cleanups and also add offset CSRStatus on WishboneDMAWriter (for symetry with WishboneDMAReader).
...
Defaults parameters can allow the FPGA gateware to behave by itself after initialization while still being configurable by software.
2021-03-04 11:53:43 +01:00
Florent Kermarrec
225a518f7e
soc/cores/video: Move LiteDRAMDMAReader import to VideoFramerBuffer to avoid LiteDRAM dependency.
2021-03-04 08:40:47 +01:00
Vamsi Vytla
ae5f67f6f0
litex/soc/cores/ussysmon.py: minor bug
2021-03-03 14:47:52 -08:00
Vamsi Vytla
1793efb50b
litex/soc/cores/ussysmon.py: dadr address space bump
2021-03-03 14:38:27 -08:00
Florent Kermarrec
ccc8916995
soc/cores/video: Add initial (and simple) VideoFrameBuffer core.
2021-03-03 19:58:11 +01:00
Vamsi Vytla
922f85e64b
litex/soc/cores/ussysmon.py: ADC transfer function
2021-03-03 10:50:58 -08:00
Florent Kermarrec
24fb153fa1
soc/integration: Add add_video_terminal method to LiteXSoC.
...
Adds the new LiteX's VideoTerminal core to the SoC:
self.submodules.videophy = VideoVGAPHY(platform.request("vga"), clock_domain="vga")
self.add_video_terminal(phy=self.videophy, timings="800x600@60Hz", clock_domain="vga")
2021-03-03 17:45:02 +01:00
Florent Kermarrec
35ffba8801
soc/cores: Add simple VideoOut core with VideoTimingGenerator, Video Patterns, VideoTerminal, VideoDVIPHY and VideoVGAPHY.
2021-03-03 16:17:12 +01:00
Florent Kermarrec
c5ee6741a0
software/liblitedram: Use new DQS delay reset procedure on Ultrascale(+) (by increments).
2021-03-03 11:32:43 +01:00
Florent Kermarrec
d3407c67b1
build/sim/core: Cast main_time to vluint64_t to avoid ambiguity error of the dump function to be used.
2021-03-03 09:25:54 +01:00
Florent Kermarrec
134c628357
cores/spi_flash: Minor cosmetic cleanups, SpiFlashQuadReadWrite has also been moved to the end with a Note since should probably be re-factored.
2021-03-03 09:15:51 +01:00
Florent Kermarrec
61dcd1e8fd
soc/cores/led: Minor cosmetic cleanups.
2021-03-03 09:02:41 +01:00
Florent Kermarrec
19b1e50cbd
soc/cores/icap: Minor cosmetic cleanups.
2021-03-03 09:01:41 +01:00
Florent Kermarrec
e6f1d677e7
soc/cores/freqmeter: Minor cosmetic cleanups.
2021-03-03 08:59:51 +01:00
Florent Kermarrec
ce5e3e3b93
soc/cores/ecc: Minor cosmetic cleanups.
2021-03-03 08:55:37 +01:00
Florent Kermarrec
2fd7451fc9
soc/cores/code_8b10b: Minor cosmetic cleanups.
2021-03-03 08:54:31 +01:00
Florent Kermarrec
2e531e0ec7
soc/cores/dna: Add separator/comment.
2021-03-03 08:49:47 +01:00
Vamsi Vytla
71f7ce6a57
soc/cores/ussysmon.py: Xilinx XADC like thingy for UltraScale devices
2021-03-02 20:31:52 -08:00
enjoy-digital
c23e8813fc
Merge pull request #836 from hplp/master
...
demo with c++ HW example
2021-03-02 09:13:10 +01:00
Sergiu Mosanu
7fd39235af
Merge pull request #1 from hplp/cppdemo
...
demo with basic C and C++ examples
2021-03-02 01:31:46 -05:00
Sergiu Mosanu
769f36d468
extend demo with basic C and C++ examples
2021-03-02 01:28:21 -05:00