3903cdee92
Merge pull request #517 from bayi/master
...
Digilent CMOD A7 ISSIRAM fix
2023-08-08 19:29:32 +02:00
a6b025f7f3
Fix Digilent Cmod A7 ISSIRAM reading
2023-08-05 19:56:15 +02:00
5412d0e0e9
platforms/crosslink_nx_evn: allow use of UARTBone
...
This goes along a small resistor jumper modification and firmware flashing like
it is for the ECP5 board. A warning message is added as the default serial might
be affected (--serial serial by default). The FTDI modification software used
for the ECP5 seems to be requried and matching.
This can be tested this way:
targets/lattice_crosslink_nx_evn.py --csr-csv=csr.csv --toolchain=oxide --programmer=openocd --uart-name crossover+uartbone --build --load
litex_server --uart --uart-port /dev/ttyUSB1
litex_cli --regs
2023-08-04 20:47:32 +02:00
efc15a91a9
global: Use new WaitTimer integrated cast to int.
2023-08-01 14:56:35 +02:00
ace789653f
platforms/ti60_f225: Add connector numbering to ease review/schematic comparison.
2023-07-21 09:08:22 +02:00
72a951081a
xu8_pe3: Fix clk_p/n on pcie_x8.
2023-07-13 18:10:46 +02:00
18a3909a9c
global: Switch to litex.gen.genlib.misc.
2023-07-06 22:11:45 +02:00
e9335cd67a
Fix pins in Alchitry Cu platform, add target for Alchitry Cu
2023-06-27 21:35:55 +05:30
061a768495
Add Alchitry Cu board
2023-06-16 21:36:57 +05:30
c49a50a934
platform/gsd_butterstick: Add mssing USB comment.
2023-06-16 09:10:47 +02:00
28ecb1e9f3
enclustra_mercury_xu8_pe3: Fix pcie_x8 and add GTH banks for pcie_x4/x8.
2023-06-15 17:57:38 +02:00
06e8829eb4
platforms/gsd_butterstick: Add default programmer to avoid breaking older designs.
2023-06-14 16:40:35 +02:00
96175a9986
sitlinv_stlv7325_v2: Add default value to vccio.
2023-06-07 15:00:49 +02:00
765ee1a3ce
sitlinv_stlv7325_v2: VCCIO jumper default factory setting is 3.3V
2023-06-07 10:12:55 +07:00
b01abce7d5
platform/stlv7325-v2: update VCCIO to fix --with-pcie generation
2023-06-01 16:45:33 -04:00
7fc8ca9816
Merge pull request #506 from sensille/rv901t-spiflash
...
Add spiflash definition to linsn_rv901t board
2023-05-30 22:36:14 +02:00
8a263c18f2
sitlinv_stlv7325: Rename to v1 and update VCCIO to fix --with-pcie generation.
2023-05-30 10:39:20 +02:00
4a05e56058
Add spiflash definition to linsn_rv901t board
2023-05-27 16:20:32 +02:00
2ae2dfa6a3
Add vcu128 target ( #497 )
...
Add initial VCU128 support.
2023-05-25 22:25:44 +02:00
9362e589ac
Add initial Enclustra XU8/PE3 platform definition with Clk/I2C/PCIe/DDR4 and FMC connector definition.
2023-05-25 10:01:19 +02:00
550bc0eee5
add QMTech XC7K325T board, add seven segment display to daughterboard
2023-05-08 11:51:51 +07:00
187080228c
add qmtech_xc7l325t
2023-05-08 05:17:35 +07:00
d33cf1a74c
mnt_rkx7: Cosmetic cleanups.
2023-05-05 09:48:06 +02:00
6144966d24
Merge pull request #501 from mntmn/master
...
mnt_rkx7: RGB and USB fix, add HDMI terminal
2023-05-05 09:37:40 +02:00
31c680abf8
[enh] added option for uartbone
2023-04-30 09:42:31 +02:00
874532871f
[enh] taking advantage of pins directly connected
2023-04-30 09:24:49 +02:00
1202c387bf
[init] added colorlight i5a-907 support
2023-04-30 09:24:46 +02:00
1185ff51f1
Initial support for STLV7325 (v2) Kintex-7 board.
...
This is the 2nd (2023) version of the board sold through
https://www.aliexpress.us/item/3256801088848039.html
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2023-04-28 10:24:21 -04:00
a9e3e3c050
Merge branch 'master' of https://github.com/litex-hub/litex-boards
2023-04-25 20:29:11 +02:00
d160a5ad5d
mnt_rkx7: swap RGB red/blue channels
2023-04-25 20:28:16 +02:00
03913e2e15
Update terasic_de10nano.py
...
Corrected pin number
2023-04-23 22:28:00 -05:00
b8cb2eaa47
Merge pull request #493 from hansfbaier/deca-ddr3
...
make DDR3 memory work on the DECA with the UniPHY
2023-04-11 15:27:02 +02:00
60ac45e80c
make DDR3 memory work on the DECA with the UniPHY
2023-04-11 19:59:49 +07:00
e120b77ef0
enclustra kx2/st1: fix connectors
2023-04-11 10:58:52 +07:00
c7077880b9
copyright notices on enclustra
2023-04-11 10:29:52 +07:00
ed947d1b55
enclustra: add baseboard ST1
2023-04-11 10:29:44 +07:00
be8ee26b2c
enclustra_mercury_kx2: Add ST1 baseboard, part 1
2023-04-11 05:39:11 +07:00
58679262ad
enclustra kx2: add connectors
2023-04-10 14:06:42 +07:00
a8eb0b20c1
Merge pull request #491 from hansfbaier/stlv7325-hdmi
...
STL7325: Add Video, and connectors (FMC, BTB, 2.54mm)
2023-04-07 09:06:55 +02:00
52ca60c2ac
stlv7325: fix HDMI io standard
2023-04-07 09:50:04 +07:00
2f13decc49
stlv7325: make VCCIO configurable
2023-04-07 09:27:03 +07:00
abd639ba9e
stlv7325: add 2.54mm headers
2023-04-07 08:21:17 +07:00
3f85e4ae62
stlv7325: add BTB connectors
2023-04-07 08:09:27 +07:00
b3e44324d1
sitlinv_stlv7325: add FMC connector
2023-04-07 07:56:27 +07:00
5067a2683f
sitlinv_stlv7325: add video HDMI, enable compressed bitstream
2023-04-07 07:31:42 +07:00
43ce24dcb3
add QMTech 5CEFA5 Cyclone V board support
2023-04-06 18:27:51 +07:00
ae3d5d599b
sqrl_fk33: Remove es1 workaround now that recent version of Vivado support it non-es devices.
2023-04-04 18:11:38 +02:00
e11d40a249
Merge pull request #487 from ICE-V-Wireless/master
...
Add PMOD registrations to ICE-V Wireless
2023-04-02 11:44:02 +02:00
5de47baa44
Add PMOD registrations to ICE-V Wireless
...
Signed-off-by: Michael Welling <mwelling@ieee.org>
2023-04-02 03:31:55 -05:00
f564f80826
terasic_deca: hdmi i2s uses 1.8V, not 3.3V
2023-04-01 08:14:09 +07:00
enjoy-digital
Bayi
Josuah Demangeon
Mark1626
Hans Baier
Gabriel Somlo
Arne Jansen
Chen
Charles-Henri Mousset
Lukas F. Hartmann
594rk
Michael Welling