Commit Graph

1759 Commits

Author SHA1 Message Date
Florent Kermarrec 33a0975dd7 litex_acorn_baseboard_mini: Allow configurable sys_clk_freq with Ethernet/Etherbone. 2024-02-27 12:38:08 +01:00
Florent Kermarrec 7bc03e5fbc targets/litex_acorn_baseboard_mini: Make it similar to other targets and keep SoC + UART + DRAM + Ethernet. 2024-02-26 17:29:09 +01:00
Florent Kermarrec aa34acc426 targets/digilent_arty: Allow --with-ethernet and --with-etherbone and remove --with-hybrid. 2024-02-26 15:56:58 +01:00
Florent Kermarrec feae57e7fb target/qmtech_kintex7_devboard: +X. 2024-02-26 15:41:09 +01:00
Florent Kermarrec 23313de1b4 targets: Add initial litex_acorn_baseboard_mini target from acorn_baseboard repository. 2024-02-26 12:25:15 +01:00
Florent Kermarrec 6d07eda3c0 targets/digilent_arty: Fix indent on with_usb. 2024-02-21 10:06:49 +01:00
Florent Kermarrec 68e0453677 targets/digilent_arty: Move USB integrated to BaseSoC. 2024-02-21 09:03:53 +01:00
Florent Kermarrec 8242ab3974 targets/digilent_arty: Add Ethernet/Etherbone Hybrid mode + USB-Host (through Machyne PMOD). 2024-02-20 19:44:10 +01:00
Florent Kermarrec 9c3f272f6e platforms/lambdaconcept_ecpix5: Minor cleanup. 2024-02-09 12:20:12 +01:00
enjoy-digital f7c7a5a7e5
Merge pull request #563 from smunaut/adi
Some minor updates to the ADI ADRV2CRR board
2024-02-06 16:33:53 +01:00
enjoy-digital a6f8f0e696
Merge pull request #561 from ruurdk/qmtech
Add support for QMTech Kintex 7 Development board
2024-02-06 16:29:54 +01:00
Sylvain Munaut b3caabcca3 di_adrv2crr_fmc: Bump PCIe to 8 lanes
There used to be an issue with 8 lanes litepcie USP for that board
when it was first added, but it's been solved now, so might as well
use all the available lanes

Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2024-02-05 11:43:02 +01:00
Sylvain Munaut 2264df8a0a adi_adrv2crr_fmc: Speedgrade of the PLL is -2
Speedgrade of the chip was updated in a previous commit, but
I forgot to update the PLL too

Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2024-02-05 11:42:14 +01:00
Ruurd Keizer 66152390ba Add support for QMTech Kintex 7 Development board 2024-02-01 16:16:01 +01:00
John Simons 741082e5ee
Merge branch 'litex-hub:master' into axau15_update 2024-01-27 03:28:28 +01:00
John Simons 721fa0b4b3 axau15: added more FMC+ pins and made some corrrections 2024-01-27 03:27:48 +01:00
Florent Kermarrec 39dc0b36a4 sipeed_tang_mega_138k: Fix build with ethernet and local/remote ip indent. 2024-01-22 13:20:07 +01:00
enjoy-digital dbcd5bc3f5
Merge pull request #559 from racerxdl/master
sipeed_tang_mega_138k: Added PCIe reset and other pins from sipeed dock
2024-01-15 08:42:37 +01:00
Florent Kermarrec 261c61cf62 targets/sipeed_tang_nano_4k: Remove commited spiflash.o. 2024-01-14 11:24:18 +01:00
Lucas Teske 3438f74224
sipeed_tang_mega_138k: Added PCIe reset and other pins from sipeed documentation 2024-01-13 04:38:54 -03:00
Florent Kermarrec 926d54cb41 sipeed_tang_nano_4k: Switch to LiteX's UART and expose hyperram parameter. 2024-01-11 13:54:44 +01:00
Florent Kermarrec 688a020f35 sipeed_tang_meta_138k: Add gowin_ae350 CPU initial support.
./sipeed_tang_mega_138k.py --cpu-type=gowin_ae350  --build --flash
        __   _ __      _  __
       / /  (_) /____ | |/_/
      / /__/ / __/ -_)>  <
     /____/_/\__/\__/_/|_|
   Build your hardware, easily!

 (c) Copyright 2012-2024 Enjoy-Digital
 (c) Copyright 2007-2015 M-Labs

 BIOS built on Jan 11 2024 12:37:50
 BIOS CRC passed (0efaefbe)

 LiteX git sha1: e689aab1

--=============== SoC ==================--
CPU:		Gowin AE350 @ 800MHz
BUS:		WISHBONE 32-bit @ 4GiB
CSR:		32-bit data
ROM:		128.0KiB
SRAM:		8.0KiB


--============== Boot ==================--
Booting from serial...
Press Q or ESC to abort boot completely.
sL5DdSMmkekro
Timeout
No boot medium found

--============= Console ================--

litex> ident
Ident: LiteX SoC on Tang Mega 138K 2024-01-11 12:37:47
2024-01-11 13:17:05 +01:00
Gwenhael Goavec-Merou 29143a89f8 platforms/sipeed_tang_mega_138k: adding some resources/connectors definition (SPI flash, Buttons, SDRAM connector) 2024-01-10 10:37:01 +01:00
enjoy-digital 52f9f0f107
Merge pull request #555 from machdyne/master
add support for minze board
2024-01-07 08:10:51 +01:00
Florent Kermarrec 52aeec00d7 sipeed_tang_nano_4k: Remove note since openFPGALoader regression has been fixed. 2024-01-04 18:29:31 +01:00
Florent Kermarrec c0a98a6b9d targets/sipeed_tang_nano_4k: Directly integrate flashing of EMCU flash.
Ex to build/flash bitstream + firmware with EMCU:
./sipeed_tang_nano_4k.py --cpu-type=gowin_emcu --build --flash
2024-01-03 13:07:44 +01:00
Florent Kermarrec 55ade3b2df sipeed_tang_nano_4k: Minor cleanup/add comments. 2024-01-02 13:42:56 +01:00
inc fd59d954ba add support for minze board 2023-12-29 06:01:59 +01:00
Florent Kermarrec 982038508e alinx_axau15/PCIe: Switch to Gen3/128-bit for now (configuration used on others Ultrascale+ Gen3 X4 boards). 2023-12-28 19:56:52 +01:00
Florent Kermarrec e229d1a0b6 alinx_axau15: First review/cleanup pass and fix missing INTERNAL_VREF on bank 66. 2023-12-28 19:48:50 +01:00
enjoy-digital b340d9e5e7
Merge pull request #550 from Johnsel/master
alinx_axau15: Added new Alinx Artix US+ board
2023-12-28 19:24:14 +01:00
inc 754b6d2427 add support for mozart ml1 2023-12-19 22:18:21 +01:00
Gwenhael Goavec-Merou e8bc9fa81d targets/sipeed_tang_nano_4k: adding description to write Gowin EMCU firmware 2023-12-14 13:24:57 +01:00
Gwenhael Goavec-Merou 4166a94a1f prog/openocd_ecpix5.cfg: refresh/fix 2023-12-13 18:34:02 +01:00
John Simons 2c2b3e318a Fixed pinout and first steps adding PCIe support 2023-12-12 15:44:51 +01:00
John Simons ab60d91138 alinx_axau15: Fixed minor clock and sdcard reference issues 2023-12-05 21:14:57 +01:00
John Simons 7be052911b alinx_axau15: Added new Alinx Artix US+ board 2023-12-05 20:45:57 +01:00
Gwenhael Goavec-Merou ba86121ea9 platforms/efinix_trion_t120_bga576_dev_kit: P2/P3 description 2023-11-14 19:27:59 +01:00
Florent Kermarrec 6333fbe724 targets/siglent_sds1104xe: Update with new LiteX Ethernet/Etherbone integration. 2023-11-13 09:02:09 +01:00
Florent Kermarrec 1969b4f6d3 siglent_sds1104xe: Update Ethernet/Etherbone integration. 2023-11-10 18:58:42 +01:00
Gwenhael Goavec-Merou 0ee5fedb63 platforms/sipeed_tang_mega_138k: move RGMII Ethernet to dock_io 2023-11-10 07:41:09 +01:00
Gwenhael Goavec-Merou fd36608438 sipeed_tang_mega_138k: fix pins DRIVE, remove a[15], fix memory model 2023-11-10 07:39:19 +01:00
enjoy-digital 17a0152ef9
Merge pull request #547 from trabucayre/tangMega138k
Tang mega138k
2023-11-09 11:56:58 +01:00
Gwenhael Goavec-Merou 4ff1362e5b targets,platforms/sipeed_tang_mega_138k: fix copyright 2023-11-09 11:55:35 +01:00
Florent Kermarrec 8e3dc21ce5 aliexpress_xc7k70t: Review/Cleanup.
- Cosmetic cleanups in platform.
- Add clk50 constraint.
- Remove JTAGBone specific support since now directly handled by LiteX.
2023-11-09 08:26:06 +01:00
Hans Baier 69ee48d421 Add AliExpress Kintex XC7K70T board 2023-11-09 10:34:18 +07:00
Gwenhael Goavec-Merou 2c52ce0c47 targets/sipeed_tang_mega_138k: fix SDRAM (requires Mister XSDS v3.0 extension) 2023-11-08 07:13:28 +01:00
Gwenhael Goavec-Merou e9f53685fe targets/sipeed_tang_mega_138k: DDR3 support (not working) 2023-11-08 07:00:24 +01:00
Gwenhael Goavec-Merou 8c3ac2f114 platforms/sipeed_tang_mega_138k: DDR3 IOs 2023-11-08 07:00:18 +01:00
Gwenhael Goavec-Merou d4e73fd389 platforms/sipeed_tang_mega_138k: fix sdram_connector pinout and move to _dock_io 2023-11-08 07:00:01 +01:00