ce9b67e2ee
Added icebreaker platform and target.
...
Target is heavily based on Fomu.
2020-03-05 00:12:18 -08:00
fd6c555117
Merge pull request #50 from TomKeddie/tomk_20200228_colorlight_connectors
...
platforms/colorlight_5a_75b: add J1-J8 connectors
2020-02-28 19:11:30 +01:00
7b4ca20ff4
platforms.colorlight_5a_75b: add J1-J8 connectors
2020-02-28 06:09:44 -08:00
be5ed35871
targets: default to trellis toolchain on all ECP5 targets (now able to build all supported targets).
2020-02-28 09:46:54 +01:00
b44885d222
vc707: fix copyrights (Michael Betz is the initial author)
2020-02-28 08:39:52 +01:00
b89af28a05
targets/kc705: use DDRPHY_CMD_DELAY to center write leveling.
2020-02-27 12:58:52 +01:00
edcc2cf63e
test_targets: add vc707, zcu104, vcu118 and colorlight_5a_75b
2020-02-27 11:17:28 +01:00
aaa10c69eb
platforms/colorlight_5a_75b: add default_clk_name/period
2020-02-27 11:16:49 +01:00
d8de4fbdfb
platforms/targets: keep in sync with LiteX
2020-02-27 11:06:53 +01:00
18f65a7f9d
platforms/kc705: cleanup ddram.
2020-02-27 11:06:35 +01:00
d4460c11a5
platforms/kcu105/vcu118: remove PRE_EMPHASIS/EQUALIZATION on dm.
2020-02-27 10:43:41 +01:00
58f588f69e
platforms/zcu104/ddram: add PRE_EMPHASIS/EQUALIZATION settings
2020-02-27 10:43:01 +01:00
d87b8b3c66
zcu104: add separate ddram_32/64 definitions and use ddram_32 for now.
...
Ease switching between ddram_32 and ddram_64.
2020-02-27 10:05:17 +01:00
8ecfb13f3c
zcu104: add copyrights
2020-02-27 09:57:26 +01:00
22b0449509
Merge pull request #47 from antmicro/zcu104
...
Add support for ZCU104 board
2020-02-27 09:51:54 +01:00
608541d5b8
add ZCU104 board
2020-02-26 13:53:21 +01:00
e516ff3452
vcu118/ddram: use similar IO settings than Xilinx's MIG, comment unused pins.
2020-02-26 10:16:51 +01:00
9d2ca50c5f
kcu105/ddram: use similar IO settings than Xilinx's MIG, comment unused pins.
2020-02-26 10:16:35 +01:00
83d2c71099
platforms/vcu118: add missing Internal Vref configuration on DDR4 C1/C2 banks
2020-02-25 18:32:42 +01:00
4a84e9b08a
targets/colorlight_5a_75b: add instruction to build/load and use bitstream with wishbone-tool
2020-02-25 12:47:08 +01:00
f279fe9d33
vc707: cleanup platform/targets, remove Ethernet support (no Ethernet pads defined)
2020-02-25 10:35:18 +01:00
3581df5af6
vc707: cleanup platform/targets, remove Ethernet support (SGMII is not currently supported)
2020-02-25 09:41:53 +01:00
88a1f80db1
vc707/vcu118: use proper copyrights
2020-02-25 09:03:52 +01:00
e34654fc8c
Merge pull request #46 from fei-g/master
...
add new board files for VC707 and VCU118
2020-02-25 08:46:52 +01:00
373e74f435
add new board files for VC707 and VCU118, only specified limited ports for VCU118, including clock, reset and DDR4
2020-02-24 14:20:47 -05:00
133f735e1f
Merge pull request #45 from trabucayre/fix_colorlight5A-75B_SDRAM
...
platforms/colorlight_5a_75b.py: fix sdram_clock and sdram a pins
2020-02-24 08:30:18 +01:00
2cf4e084ec
platforms/colorlight_5a_75b.py: fix sdram_clock and sdram a pins
2020-02-23 10:01:41 +01:00
f72e7bd314
Merge pull request #41 from lromor/fix-wrong-import
...
Changed wrong imports for fomu board.
2020-02-12 18:48:13 +07:00
ec30cc05c3
Changed wrong imports for fomu board.
2020-02-12 12:40:07 +01:00
c94360c2e0
targets: avoid direct use of mem_decoder.
2020-02-11 21:59:42 +01:00
4edf196911
targets/EthernetSoC: be sure memory region is added before adding Wishbone Slave (required by new SoC)
2020-02-11 17:45:35 +01:00
83c48946ad
test/test_targets: make sure all platforms are tested.
2020-02-03 10:04:14 +01:00
c3d8c7462d
test/test_targets: update
2020-02-03 09:44:22 +01:00
8211aca2e8
Avoid Official/Partner/Community differentiation: use same directory for all platforms/targets.
...
We initially wanted to provide different level of support for the platforms/targets, mainly
to avoid too much maintenance and let each contributor update its contributed platforms and
targets, but it's easier to update all platforms/targets all-together when LiteX evolves or
changes (and that's what has been done on litex-boards since the creation of the repository).
So let just simplify things and avoid this differentiation.
2020-02-03 09:36:30 +01:00
7a24406b2e
targets: fomu: fix compatibility for when a cpu is added
...
Things weren't quite right for adding a CPU. This fixes that by
correcting the placer arguments, memory map, and USB type.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-02-03 08:58:54 +08:00
0627f55dca
de10nano: cleanup a bit, rename SDRAMSoC to MiSTerSDRAMSoC and argument to --with-mister-sdram to make it clear that it's using the MiSTer SDRAM extension board.
2020-01-31 09:29:02 +01:00
cf9a9ff91b
de10nano: update copyrights, remove trailing whitespaces
2020-01-31 09:13:36 +01:00
4f85d50ff5
Merge pull request #39 from sajattack/de10nano
...
Add de10 nano board
2020-01-31 09:08:19 +01:00
36e1f1fe75
rename sw to user_sw
2020-01-30 05:01:46 -08:00
1631b071c3
finish up sdram, passes memtest
2020-01-30 03:41:44 -08:00
5091a1b40a
WIP sdram module option
2020-01-29 13:59:57 -08:00
3a6a9258ce
add de10 nano board
...
add iostandard to hdmi
2020-01-29 00:21:51 -08:00
2ec6bc0bdc
colorlight_5a_75b: add disclaimer
2020-01-23 14:13:13 +01:00
55c0b781e4
colorlight_5a_75b: revert rx_delay to 2ns, improve comment (thanks @tnt)
2020-01-23 13:16:36 +01:00
4fb89fc9c5
colorlight_5a_75b: set RGMII tx/rx_delay to 0ns in the FPGA (added by PCB/PHY)
2020-01-23 09:39:48 +01:00
dcc65b347d
targets/colorlight_5a_75b: switch to SoCCore, CPU and Etherbone working :)
...
Tested with:
./colorlight_5a_75b.py --cpu-type=picorv32 --uart-name=crossover --with-etherbone --csr-csv=csr.csv
Load with following script:
#!/usr/bin/env python3
# Load ---------------------------------------------------------------------------------------------
def load():
import os
f = open("openocd.cfg", "w")
f.write(
"""
interface ftdi
ftdi_vid_pid 0x0403 0x6011
ftdi_channel 0
ftdi_layout_init 0x0098 0x008b
reset_config none
adapter_khz 25000
jtag newtap ecp5 tap -irlen 8 -expected-id 0x41111043
""")
f.close()
os.system("openocd -f openocd.cfg -c \"transport select jtag; init; svf soc_etherbonesoc_colorlight_5a_75b/gateware/top.svf; exit\"")
exit()
if __name__ == "__main__":
load()
Then start lxserver:
lxserver --udp
And run following script:
#!/usr/bin/env python3
import sys
from litex import RemoteClient
wb = RemoteClient()
wb.open()
# # #
while True:
if wb.regs.uart_xover_rxempty.read() == 0:
print(chr(wb.regs.uart_xover_rxtx.read()), end="")
sys.stdout.flush()
# # #
wb.close()
2020-01-22 15:57:52 +01:00
c07e4a6b3a
colorlight_5a_75b: fix rst_n
2020-01-22 14:57:48 +01:00
8da8ed7a0e
colorlight_5a_75b/v7.0: update eth_clocks/rx pinout, remove FIXME
2020-01-22 14:56:17 +01:00
bb805999cb
platforms/colorlight_5a_75b: fix 6.1 used_led_n/user_btn_n thanks @smunaut
2020-01-22 12:43:37 +01:00
43badd162e
colorlight_5a_75b/v6.1: add led/btn and remove FIXME on sdram now that clarified
2020-01-22 11:05:08 +01:00
Piotr Esden-Tempski
enjoy-digital
Tom Keddie
Piotr Binkowski
Fei Gao
Gwenhael Goavec-Merou
Sean Cross
Leonardo Romor
Paul Sajna