Gustav
|
2d3a6b81e6
|
Add support for NetFPGA-Sume (#604)
|
2024-09-18 11:21:51 +02:00 |
Apostolos - Nikolaos Vailakis
|
1cfd32698c
|
Add support for Signaloid C0-microSD (#601)
|
2024-09-18 10:48:57 +02:00 |
Gwenhael Goavec-Merou
|
3050716e8e
|
boards: digilent_nexys4ddr, kosagi_netv2, sipeed_tang_primer_20k: added eth_ip/remote_ip arg
|
2024-09-13 15:40:12 +02:00 |
Florent Kermarrec
|
1dbecf704d
|
efinix_ti375: Cosmetic cleanups on #610.
|
2024-09-11 09:10:48 +02:00 |
enjoy-digital
|
d312ea331f
|
Merge pull request #610 from Dolu1990/ti375_c529
Add efinix Ti375 c529 dev kit support
|
2024-09-11 08:18:44 +02:00 |
Gwenhael Goavec-Merou
|
d0c07933bf
|
litex_boards/targets/efinix_trion_t20_bga256_dev_kit.py: removed create_clkout name param, updated ClkOutput special
|
2024-09-10 16:37:12 +02:00 |
Gwenhael Goavec-Merou
|
59d32e4283
|
targets/efinix_trion_t120_bga576_dev_kit.py: fix clock name to match sys_clk real name
|
2024-09-10 08:06:43 +02:00 |
Dolu1990
|
d209f64a45
|
Add efinix_ti375_c529_dev_kit support
|
2024-09-05 15:30:55 +02:00 |
Florent Kermarrec
|
c8603bebe4
|
targets/hyperram: Switch Hyperram memory mode to rwx (required with VexiiRiscv).
|
2024-09-04 22:06:40 +02:00 |
Gwenhael Goavec-Merou
|
185f8d5da4
|
Merge pull request #603 from pepijndevos/apicula
make Gowin boards work with Apicula
|
2024-09-04 10:40:10 +02:00 |
Pepijn de Vos
|
8f59ebeffb
|
WIP: make boards Gowin boards work with Apicula
|
2024-09-04 08:33:06 +02:00 |
Gwenhael Goavec-Merou
|
738a5a8931
|
targets/efinix_trion_t120_bga576_dev_kit.py: added argument to select between RMII PMOD (default) or onboard RGMII Phy
|
2024-09-03 19:16:39 +02:00 |
Gwenhael Goavec-Merou
|
7f26f3940f
|
efinix_trion_t120_bga576_dev_kit.py: fixed/rewire rx_ctl/tx_ctl (not compatible with DDIO mode), added message at build time
|
2024-09-03 16:01:51 +02:00 |
Gwenhael Goavec-Merou
|
0313424fa0
|
targets/efinix_trion_t120_bga576_dev_kit.py: added argument to configure remote-ip. Pass local_ip and remote_ip to add_etherxxx
|
2024-09-03 12:42:49 +02:00 |
Gwenhael Goavec-Merou
|
5a1e4bedfd
|
targets/efinix_titanium_ti60_f225_dev_kit.py: disable software_debug by default
|
2024-09-03 12:41:05 +02:00 |
Gwenhael Goavec-Merou
|
0787517338
|
targets/efinix_titanium_ti60_f225_dev_kit.py: added argument to configure remote-ip. Pass local_ip and remote_ip to add_etherxxx
|
2024-09-03 12:40:35 +02:00 |
Dolu1990
|
21e42e5bf6
|
wip
|
2024-08-30 20:35:38 +02:00 |
Florent Kermarrec
|
e7d00a8c43
|
ti60_f225_dev_kit: Update to new HyperRAM core with 2:1 ratio.
Tested at up to 250MHz sys_clk -> 125MHz HyperRAM Clk.
|
2024-08-29 12:35:39 +02:00 |
Florent Kermarrec
|
fd4f9ac186
|
targets: Use KILOBYTE/MEGABYTE constants when possible.
|
2024-08-29 12:18:19 +02:00 |
Dolu1990
|
664525471f
|
Got HDMI to work on hardware
|
2024-08-28 20:19:33 +02:00 |
Florent Kermarrec
|
c5d1a252c5
|
targets: Fix build with --cpu-type=None on iCE40/Up5kSPRAM.
|
2024-08-28 15:53:53 +02:00 |
Dolu1990
|
30e26cacac
|
Add sdcard and usb ohci support
|
2024-08-27 08:31:53 +02:00 |
Dolu1990
|
abaa9c404c
|
Fix the reset
|
2024-08-26 18:27:55 +02:00 |
Dolu1990
|
144462e862
|
add jtag
|
2024-08-26 18:08:09 +02:00 |
Dolu1990
|
d2cc8ad815
|
Got LPDDR4 to work
|
2024-08-26 16:54:53 +02:00 |
Dolu1990
|
e604745c7d
|
wip
|
2024-08-26 13:05:57 +02:00 |
Dolu1990
|
0f8b8defb4
|
efinix ti375 c529 dev kit bios OK
|
2024-08-26 11:29:27 +02:00 |
Gwenhael Goavec-Merou
|
b1a6da84b3
|
sipeed_tang_primer_25k: add SDRAM support (j3 connector), allows user to select between mister and sipeed SDRAM module
|
2024-08-04 12:14:56 +02:00 |
Gwenhael Goavec-Merou
|
2fa838b79d
|
sipeed_tang_mega_138k_pro: added SDRAM sipeed variant, allows user to select between mister and sipeed SDRAM module, fix sipeed SDRAM memory module
|
2024-08-04 12:13:47 +02:00 |
Gwenhael Goavec-Merou
|
938bf8b3a6
|
targets/lattice_certuspro_nx_xx,targets/lattice_crosslink_nx_xxx: pass platform to NXOSCA CTOR
|
2024-07-22 15:18:27 +02:00 |
Florent Kermarrec
|
5d4ebeb09c
|
targets: Add initial Enclustra Mercury+ XU8/PE3 target with DRAM and PCIe.
|
2024-07-22 11:40:19 +02:00 |
Florent Kermarrec
|
8f8e0bd228
|
targets/enclustra: Add Enclustra to identifier.
|
2024-07-22 11:38:22 +02:00 |
Florent Kermarrec
|
f844d06da2
|
targets/litex_acorn_baseboard_mini: Add detect_ftdi_chip method since newer batch of baseboard is mounted with FTDI ft4232 chips.
FT2232 and FT4232 chips are footprint compatible but still need to be handled differently from software.
|
2024-07-19 15:43:25 +02:00 |
Florent Kermarrec
|
88ab3eca6f
|
targets: Map SPRAM to SRAM when use as SRAM.
|
2024-07-17 11:01:34 +02:00 |
Florent Kermarrec
|
15c6f89b1a
|
#570: Update CAN support with LiteX https://github.com/enjoy-digital/litex/pull/2007.
|
2024-07-05 10:26:28 +02:00 |
enjoy-digital
|
2e120bf8a4
|
Merge pull request #570 from disdi/master
Add support for CTUCAN for Arty & Genesys2 board
|
2024-07-05 09:21:09 +02:00 |
Gwenhael Goavec-Merou
|
ac427feb0a
|
targets/lattice_certuspro_nx_vvml,lattice_certuspro_nx_evn: switch sys_clk to NXPLL
|
2024-07-03 12:36:28 +02:00 |
Florent Kermarrec
|
9898672744
|
siglent_sdr1104xe: Update IP/MAC addresses.
|
2024-07-02 17:09:23 +02:00 |
Gwenhael Goavec-Merou
|
1c06988d80
|
platforms,targets/lattice_certuspro_nx_evn,lattice_certuspro_nx_vvml: set sysconfig SPI_MASTER mode by default at platform level
|
2024-07-01 11:07:25 +02:00 |
enjoy-digital
|
40204ac815
|
Merge pull request #595 from trabucayre/lattice_certusnxpro
Lattice certusnxpro
|
2024-06-28 13:26:47 +02:00 |
enjoy-digital
|
5813df9b44
|
Merge pull request #591 from VOGL-electronic/efinix_trion_t20_pulse_reset
targets: efinix_trion_t20_bga256_dev_kit: add pulse for reset
|
2024-06-28 13:24:29 +02:00 |
Gwenhael Goavec-Merou
|
8579af5710
|
lattice_certuspro_nx_vvml: new board support
|
2024-06-28 12:47:57 +02:00 |
Gwenhael Goavec-Merou
|
f27bbc9645
|
lattice_certuspro_nx_evn: new board support
|
2024-06-28 12:47:16 +02:00 |
Florent Kermarrec
|
4f8540d53e
|
targets/litex_acorn_baseboard_mini: Switch to _litex_acorn_baseboard_mini_io.
|
2024-06-27 14:23:43 +02:00 |
Fin Maaß
|
c205bb756b
|
targets: efinix_trion_t20_bga256_dev_kit: add pulse for reset
to do a reset on the trion t20 a pulse is needed.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
|
2024-06-24 09:14:55 +02:00 |
inc
|
cb43cdf6f9
|
targets/machdyne_vanille: set uart_name to stub
|
2024-06-22 12:13:30 +02:00 |
inc
|
a1df389c7e
|
machdyne: switch to LiteXArgumentParser; add mozart ml2+mx1 and vivaldi ml1
|
2024-06-22 11:26:43 +02:00 |
inc
|
34e85c5cf6
|
machdyne: fix typos; add vanille and lakritz
|
2024-06-22 09:26:42 +02:00 |
enjoy-digital
|
95f5e030e5
|
Merge pull request #590 from trabucayre/zynq_csr_master_bus
ZynqXXX boards: remove CSR definition and GP0 connection to CPU
|
2024-06-19 08:48:33 +02:00 |
Florent Kermarrec
|
dad6b2b9b6
|
efinix_trion_t20_bga256_dev_kit: Cleanup/Review platform/target.
|
2024-06-19 08:23:54 +02:00 |