5e649a6577
litescope: add basic LiteScopeUSB2WishboneFTDIDriver (working but need to be optimized)
2015-05-01 20:45:04 +02:00
c03c41eb77
litescope: rename host directory to software (to be coherent with others cores)
2015-05-01 20:45:02 +02:00
cd3a51ada6
litescope: fix missing source ack on LiteScopeWishboneBridge
2015-05-01 20:44:57 +02:00
1281a463d6
litescope/bridge: create a generic wishbone bridge that can be used with different phys (the phy needs to provide a sink/source with 8bits data).
...
- we can now pass a phy to LiteScopeWishboneBridge
- LiteScopeUART2Wishbone is only a specific LiteScopeWishboneBridge
- UART mux is removed since complicated and no longer useful (we can now create easily virtual UART over Ethernet, USB or PCIe) or simply add another UART for debug.
2015-05-01 17:51:18 +02:00
23126415d3
litescope: use full name in io.py
2015-05-01 17:49:31 +02:00
ff2d1d9383
litescope: fix read in reg.py
2015-04-20 08:16:31 +02:00
4c0d9f5f36
litescope: remove repeat mode on drivers (not useful) and cleanup
2015-04-18 15:37:38 +02:00
5a930fe7cf
lite* cores: changes permissions (+x) on make.py files and on litepcie init.sh file
2015-04-18 08:51:59 -04:00
341f635a85
litescope: add PCIe driver (mmap/Sysfs) and use it on litepcie example design
2015-04-18 13:58:20 +02:00
312f302d36
litescope/examples_designs: add build directory
2015-04-13 14:53:17 +02:00
40abd66d69
litescope: more pep8 (when convenient), should be almost OK
2015-04-13 13:56:24 +02:00
4cdb0ddf3a
litescope: pep8 (E265)
2015-04-13 13:46:06 +02:00
8f9bd24f6f
litescope: pep8 (E261, E271)
2015-04-13 13:40:30 +02:00
eb58f45b31
litescope: pep8 (W292)
2015-04-13 13:38:35 +02:00
f16623d548
litescope: pep8 (E225)
2015-04-13 13:37:46 +02:00
7e37d7b6d0
litescope: pep8 (E222)
2015-04-13 13:29:41 +02:00
651e228e22
litescope: pep8 (E401)
2015-04-13 13:28:47 +02:00
49dcf8d831
litescope: pep8 (E203)
2015-04-13 13:25:27 +02:00
51ca259bdb
litescope: pep8 (E231)
2015-04-13 13:23:48 +02:00
67b4da8ecf
litescope: pep8 (E201)
2015-04-13 13:20:13 +02:00
13e4d7c525
litescope: pep8 (E302)
2015-04-13 13:18:21 +02:00
1328328540
litescope: pep8 (replace tabs with spaces)
2015-04-13 13:09:44 +02:00
b437dc3185
remove use of _r prefix on CSRs
2015-04-02 12:18:43 +02:00
f65c0a3c95
adapt LiteScope to new SoC
2015-04-01 22:46:24 +02:00
236ea0f572
liteeth: use bios ip_address in example designs
2015-03-18 18:18:43 +01:00
70f1f96fda
litescope/drivers: do not build regs when addrmap is None
2015-03-17 16:04:31 +01:00
a266deb58e
LiteXXX cores: fix frequency print in test/test_regs.py
2015-03-17 16:01:25 +01:00
d2cb41bc63
LiteXXX cores: convert port parameter to int if is digit in test/make.py
2015-03-17 15:58:21 +01:00
a874f85854
litescope: use CRG from Migen
2015-03-17 11:52:54 +01:00
52f1c45407
LiteXXX cores: fix test_reg.py
2015-03-04 23:13:14 +01:00
1d4dc45436
LiteXXX cores: use format in prints
2015-03-03 10:29:28 +01:00
096e95cb59
uart: use data instead of d on endpoint's layouts (coherency with others cores)
2015-03-01 16:56:48 +01:00
649cdeb265
liteXXX cores: use new uart and import FlipFlop/Counter/Timeout from Migen
2015-03-01 16:48:41 +01:00
c21a7956c8
liteXXX cores: remove Identifier duplication
2015-03-01 11:24:58 +01:00
67ca0da1d9
liteXXX cores: share same methodology for on-board tests
2015-03-01 11:21:12 +01:00
32fce11edf
litescope: avoid uart code duplication
2015-03-01 10:07:55 +01:00
b32a0e6f9e
liteeth: create example design derived from SoC that can be used on all targets with Ethernet pins
2015-02-28 23:33:00 +01:00
b34be816ec
liteXXX cores: remove setup.py and relative paths (we will install misolib of use PYTHON_PATH)
2015-02-28 22:23:48 +01:00
5c43d4d091
litescope: create example design derived from SoC that can be used on all targets
2015-02-28 22:19:24 +01:00
0fd1b9df8d
liteXXX cores: remove redefinition of get_csr_csv
2015-02-28 21:45:05 +01:00
5bd1ab7fa1
liteXXX cores: update README and doc
2015-02-28 21:40:59 +01:00
69e869893d
remane GenSoC to SoC (more coherent and we will add support for multiple SoCs with their own Wisbbone/CSR buses in the future)
2015-02-28 11:36:15 +01:00
df0ba1b03c
litescope: create example_designs directory
2015-02-28 10:42:12 +01:00
c4ebf244a1
litescope: move files and modify import to misoclib.tools.litescope
2015-02-28 10:33:46 +01:00
b274e948dc
merge litescope
2015-02-28 10:24:49 +01:00
Florent Kermarrec