615d7da703
README: fix tabs
2015-01-28 15:55:52 +01:00
9d6a3e7f2a
doc: add skeleton
2015-01-27 21:35:58 +01:00
0c907e5afa
fill building parameters
2015-01-27 20:24:14 +01:00
7f9174f83d
add storage qualifier
2015-01-27 20:14:07 +01:00
fc96b20225
add optional subsampler
2015-01-27 19:58:02 +01:00
70d7152cda
core/storage: split LiteScopeRecorder in LiteScopeRecorderUnit and LiteScopeRecorder
2015-01-27 11:34:59 +01:00
64d18796e0
change CSR class names (do not expose XXYYCSR to user)
2015-01-25 21:34:13 +01:00
a3dae5fc5c
host/driver: simplify
2015-01-25 16:13:06 +01:00
4472dac603
simplify code and use Sink/Source instead of records
2015-01-25 15:58:00 +01:00
6f7d85b95c
host: remove cpuif (we use the one from MiSoC) and some clean up
2015-01-23 16:45:04 +01:00
9a3e9f86cf
simplify LiteScopeLA export (use vns from platform on atexit)
2015-01-23 10:07:58 +01:00
261469814f
add hack to generate verilog with AsyncResetSynchronizer (FIXME)
2015-01-23 03:18:25 +01:00
fb7864c2b9
add missings __init__.py
2015-01-23 01:14:35 +01:00
d45991d6eb
fix README
2015-01-23 01:07:51 +01:00
ea48f44b90
add LiteScopeLA example
2015-01-23 00:46:24 +01:00
5c40ff02cb
add LiteScopeIO example
2015-01-23 00:15:42 +01:00
f35f93a7c5
start refactoring and change name to LiteScope
2015-01-23 00:02:53 +01:00
609f8f9abb
revert submodules/specials/clock_domains syntax
2015-01-22 14:00:50 +01:00
fadac0cf83
drivers: fix mask generation when using cond
2015-01-16 23:50:33 +01:00
8f14f67ea6
simplify UART2Wishbone and add timeout
2015-01-14 18:10:37 +01:00
54597f1bfc
use new submodules/specials/clock_domains automatic collection
2015-01-14 13:55:18 +01:00
834e9b99be
host/drivers: add possibility to pass cond dict to ease trigger pattern generation
2014-12-23 20:53:05 +01:00
8c5c32751e
add input pipe stage option
2014-10-28 20:53:26 +01:00
d860813dec
use new direct access on endpoints
2014-10-16 17:57:30 +02:00
9649b1497c
uart2wishbone: fix missing payload.d
2014-10-16 09:37:43 +02:00
2319ee0ab7
uart2wishbone: always use payload.d and not .d
2014-10-15 12:13:22 +02:00
027ddc65ca
fill __init__.py to simplify imports
2014-10-10 17:24:36 +02:00
bf95ea6c1c
mila: simplify usage
2014-10-10 16:17:12 +02:00
d0c9838dca
uart2wishbone: share UARTRX and UARTTX with MiSoC
2014-10-10 15:15:58 +02:00
ba30a01830
mila: fixes when used without RLE
2014-10-06 12:30:06 +02:00
f72f11f7b4
mila: add clk_domain support
...
an AsyncFIFO is inserted when clk_domain is not "sys" to enable capture from another clock domain.
sys_clk frequency need to be greater than clk_domain clock.
future possible improvement: automatic insertion of a converter when clk_domain frequency is
greater than sys_clk.
2014-10-06 12:07:20 +02:00
7043e6a5f3
mila: simplify export
2014-10-01 10:06:59 +02:00
111f527647
do some clean up
2014-09-24 22:26:33 +02:00
2fb418a373
use new MiSoC UART with phase accumulators
...
this will allow to speed up MiLa reads
2014-09-24 21:56:15 +02:00
452a4a76f3
use verilog namespace to export mila configuration
2014-08-03 17:09:01 +02:00
6ffed70b59
uart2wishbone: disconnect rx line from shared pads when bridge is selected
...
(avoid CPU crash when we communicate with the bridge)
2014-08-03 13:15:56 +02:00
f4e6cebab2
clean up
2014-08-03 11:44:27 +02:00
cd51e78f54
storage: use SyncFIFOBuffered to implement fifo in block ram
2014-08-02 19:12:03 +02:00
47a85cc1ad
use new MiSoC fifo (no flush signal)
2014-08-01 10:36:15 +02:00
a0df5baa55
host: add support for various csr_data width (8 & 32 tested, but should work with others)
2014-06-26 13:22:21 +02:00
0f9bc5ad6e
fix bit inversion on CSV/PY exports
2014-06-21 19:06:47 +02:00
074a12b444
create dump class and specific export functions, add python dictionnary export
2014-06-19 13:24:47 +02:00
a737358919
host: split read/export and add csv export
2014-06-17 11:25:10 +02:00
8719206a3a
uart2wishbone: add default baudrate
2014-06-05 15:13:20 +02:00
b94cba2d4b
mila: add input pipe to ease timing
2014-05-24 09:23:16 +02:00
31e142fd88
drivers: clean up / fixes
2014-05-22 18:33:28 +02:00
9a059336bf
storage: simplify run length encoder...
2014-05-22 18:13:27 +02:00
0bc1cd6f77
fix uart selection when opening wishbone
2014-05-22 16:11:32 +02:00
1a07116ab1
change export format and simplify usage
2014-05-20 13:16:24 +02:00
ba0382ad92
move some functions in drivers and export layout in csv
2014-05-20 11:36:10 +02:00
Florent Kermarrec